I upgraded from xp pro sp2 to sp3 and after that computer was very slow. So I repaired SP3 and during that process it started asking for 'asms' file. Even though the sp3 cd(which i burnt from a ISO image) had the asms folder it does seem to sense the cd. I am really stuck now because, even if I reboot my pc without the cd it goes to windows setup asks for 'asms' file. Even in safe mode it says windows setup cannot proceed in safe mode it reboots.Kindly help me on what can I do now so that either i can get thru with the 'asms' file or is there a way I can revert back to sp2 and do any possible recovery so that I can go into windows and backup my files.
First time poster; having an issue with a Windows XP repair installation. More specifically, during the repair installation process I am presented with this error message:"Files Needed The file 'asms' on Windows XP Professional Service Pack 2 CD is needed. Type the path where the file is located, and then click OK. Copy files from: D: . . . " Note that the Windows XP DVD includes Service Pack 2. Also note that when the error message presents, the CD-ROM essentially goes dead.
I installed the winxp sp2 and everthing was going fine till it got to the las 37 minute.it says it cant find asms.i restarted but it kept going to the same error...im not a comp tech so any help is greatly appreciated...oh yeah, the cd i used was a copy...will i need to buy the cd? thanks for your time.
I just completed my first computer build and everything went fine, until i had to install windows. I am using Windows XP with SP2 its an oem version, and i am getting the asms problem. The only problem is, i can't use the microsoft solution because of the fact that my keyboard and mouse are not functioning when the problem goes off. I can't figure out how to just start the installation over and i don't really know where i should go from here. I hear that getting a new cd drive may help, i'm using the ones from my old computer. I also hear to borrow a windows disk and use a different disk.
Have read many threads on this and other sites and tried everything suggested (except swap out CD drive - don't have a working older drive to try). This PC is at least 5-6 yrs old - has original Hitachi CD/DVD Drive (reader, not writer). Have unplugged ALL devices from back of computer. Just has (1)internal CD/DVD drive and (1) internal LS120 floppy drive left installed.Something happened to computer - Windows XP Pro would no longer run. Tried re-installing Windows XP Pro. using OEM CD with hologram. Attempted to do a repair install, instead of a fresh install - hoping to be able to keep all programs/devices intact.During installation, computer got stuck on: "The file 'asms' on Windows XP Pro Serv Pack1 CD is needed" Type the path where the file is located and click OK""Copy files from: Global RootDeviceCDRom0I386."The screen is locked, and I can not type or change anything. Can NOT change the path. Can not hit SHIFT F10 to get to a DOS prompt.
I posted this on another thread but I noticed that no one has posted a reply since January 2005. I thought I would start a new topic about that the problem that I keep having.I am trying to upgrade from Windows Xp Home Edition to Windows Xp Professional. When I try to install Windows Xp Professional on my computer. I continue to receive this error message at 39 minutes during setup. Fatal Error: One of the components that windows needs to continue setup could not be installed. Error: installation failed : DI386asms. Error message: Incorrect function. I have tried reformatting my hard drive, cleaning my cds and cd drive numerous times. I have reburning the copy to three other cds (all brand new). I also tried unplugging my sound and internet connection only leaving the mouse, keyboard, and monitor connected to the computer while reformatting.
This came up while attempting to reinstall XP. The CD is in there, Does it just mean I should give up? The file on Windows XP Home Edition Service Pack 2 CD is needed.Type the path where the file is located, and then click OK.
Trying to do a 'repair' re-install of Windows XP Home Edition. I get through the loading of files and into the first installation window of Windows XP (after the 1st restart) and then get the system windows asking for [B]'The File ASMS on Windows XP Home Edition Service Pack 1 CD is needed. Type the path where the file is located and then click OK/B]'. The text in the path text box is 'GLOBALROOTDEVICECDROM0I386'. The ASMS file (directory) is in the 1st level directory of I386 on the CD. This is also a valid OEM CD with the Hologram. The system has two CD drives; one is a CD drive and the other is a DVD/CD RW drive. It seems it is not communicating with the drive properly.
I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
I have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.
l was installing an operating system xp in my computer,then suddenly after copying the files the messages in my screen "THE FILE ASMS ON WINDOWS XP PROFESSIONAL SERVICE PACK 3 IN CD IS NEEDED, then l try with another service pack 2 the same message appear on the screen.
I recently had a bad hard drive (It need the windows xp cd to boot) and saw that the problem was bad blocks. I decide to buy a new hard drive and use ghost to clone it. But, now i have the same problem with the new hard drive. After a while, i realize that obviously, if the disk was cloned, ONLY the information that can be copied was transfered to the other one.In conclusion, how can I resolve this issue without using system repair. the problem is that once i use this tool and then IE won't work. at last I had to format the drive.
I have a laptop with a proprietary CD that will only reformat the hard drive and load a ghost XP operating system. Is there any way to repair XP without having a MS XP disk, short of buying a MS XP system disk? By the way, I cannot stress enough the importance of backups. I use an external USB HD and do weekly full and daily differentials with NTBACKUP. When my laptop HD crashed, I was able to easily recover 100% of my files (less XP restore points, of course).
I've done a bit of searching on here and thought I'd found a way out of my problem but it seems not. Briefly my PC keeps looping on start up, it won't start in safe mode, last known config etc, so after reading here I've popped in a XP CD to do a repair but from instructions I didn't chose the 'r' function but pressed 'enter' to start the setup. I accepted the licence agreement and the PC found 2 partitions but I don't get the option to 'repair'. All I can do is 'end' the setup as I don't want to wipe my data
Right now I am having big problems with my PC. I cannot load Windows or boot in safe mode because I get this error message: MSVPC60.dll is missing, etc... .After that, the PC just hangs to a black screen. - I cannot repair Windows XP using traditional methods found on Google, such as booting with the Windows CD and going into setup and then repairing ( not using recovery console). Second, I have already tried one method in the recovery console : http://www.short-media.com/articles/repair_windows_xp, This method has eliminated a few errors ( Im now down to only MSVPC60 ) but it is enough to prevent me from doing anything.
I'm trying to run a repair on windows xp, using the installation disk. I get to the point where I am suppose to choose the operation system that I want to repair but it is not there. It gives me the correct drive but there is no indication of the operating system. Since it is not there I can not choose "r" to repair. My only option is to install of quit. I'm guessing something happened when I originally installed xp.
Does anyone know how to repair the recycle bin? Icon works fine, but once the program is opened, all that happens is the flashlight looking for files and folders to delete.
I want to connect to the internet but the network card won't work. when i right click and choose repair. it says can't repair TCP/IP is disabled. The problem started when we wanted to connect another computer and changed some settings now i can't figure out wat to do. I called the Cable ISP they say that something is wrong witht the settings of computer of network card.
I need to re-install XP pro because I have been having issues. I want to do it so I dont loose everything so I wanted to re-install from boot. I checked my settings to be sure I boot from cd first and it does. Well I get to the point where I can hit any key to boot from cd and the system then continues on to load from the harddrive. The cd never starts. I finally went and opened the cd from the drive itself. One of the choices then is to install XP but it mentions I would loose everything.The CD is Xp Pro full version dist with new systems. What am I doing wrong? Its been a long time since I re-installed.
Make sure the BIOS is set to boot from the CD (put the CD above the HD in the boot order) Insert the XP CD and boot to it When you see " To setup Windows XP now, press ENTER", go ahead and press ENTER You will now see an option to repair Windows by pressing "R". Do not select this option - it will only take you to the Recovery Console which is not what we want to do. Instead, choose to continue the installation When you see the license agreement, press F8 to agree On the next screen make sure your current XP installation is selected and then press "R" to repair XP At this point XP will begin to install on top of itself, replacing damaged, missing or altered system files. Follow the instructions on the remaining screens to complete the Repair Install. It will look very much like a normal (new) OS installation. If all goes well your repaired XP installation will remain iintact, keeping your personalized settings and installed programs as they originally were. Remember, choose the second repair option, not the first.
If I try to install add on Windows XP programs from the CD (such as the toolbar sound control) I get a message that my msnmsn.inf file can not be opened and is damaged. How can I fix it? Where does it belong? I think during installation on this new hard drive I had a problem. I have SP3 now.
So I started up my computer a few days ago to find it telling me I had a missing or corrupt file in windowssystem32configsystem. Now when I bought my computer I was sold the XP home license, and it just came with my computer, and have never needed the setup CD.So I went to the place I bought it, told them what happened they burned me a copy.So I boot off the cd, and enter the setup repair, it asks me for a password, I have never had one, default past with enter and continue on to try and fix it.Now this is where it gets interesting, I restarted to see if I had fixed the problem, and when it restarted my computer seemed to begin to load windows, when my computer suffered a LSASS.exe error, and restarts. So it eventually allows me to go back to the setup repair, but this time when it asks for a password, it doesn't allow me to default past by hitting enter. It tells me I have entered an incorrect admin password and after 3 tries, it says I have failed 3 times and then restarts.So I Googled the problem, and found it might have something to do with Sysrep(which im not familiar with) I have some important files on the computer I need rescued. Basically what I am wondering is if there is a way to bypass this new password problem, or any way I could extract certain files from my hard drive without repairing windows.
On yahoo home page was holding mouse over an ad. The computer suddenly crashed and restarted. My husband then got a sudden error message on his computer.
"One of the files containing the System's registry data had to be recovered by use of a log or alternate copy. The recovery was successful" You could not get it to go away if you clicked ok. We restarted in manually because you were not able to get into start or any programs at all. I did get it to go away at one point but still could not get into any programs or start menu. I was trying to run an anti virus and also a clean up and fix of registry, but could not.
I'm trying to do a repair on my Windows XP and when I try to get into C:/Windows - it's asking me for an administrators password - I have no idea what that is. I tried my log in password but it says it's invalid.
I purchased the Dell Inspiron 1525 laptop about 2 years ago. It shipped with Vista at the time, but I installed XP on the partition Vista was installed on and have been using it happily ever since. There is a common problem as it turns out, after having read through other forums, that used to exist with Dell laptops, including mine and that is that they would come shipped with the Mediadirect button. When pressed, it supposedly boots the laptop to another partition, which would start up a multimedia software that can playback CDs, DVDs and/or other media files on the accessible storage. The critical and serious issue is that once this button is pressed and you try to turn on the laptop normally again (boot into Windows), it would not boot up, producing the Invalid partition table error at boot-up, suggesting that the former process messes up the boot record somehow.
The same thing happened to me before. A quick suggested fix was to press the button again. While it didn't solve the issue, it at least booted in the right partition, but complained about an ntfs sys file not being there. I solved this myself by repairing the existing Win XP Pro SP3 installation via an XP SP2 CD, which reverted back SP3 to SP2 without much hassle, surprisingly, and Windows booted up normally. I just had to manually update the system to SP3 again using Windows update and that was all. Other software like IE and WMP were also reverted, but reinstalled to the latest version manually.
I have this error on my computer C:windowssystem32undll32.exe I was advised to download a new rundll32 to repair mine but I can't find any where on Microsoft web site. I have or had a virus. I was running F secure online scan when these problems all started. I have an error KB8964225.log on my screen every time I restart.I cannot access many programs obviously as the rundll is the base for a lot of things. I cannot get into system restore.
