Repair Installation Will Not Complete
May 17, 2009
On yahoo home page was holding mouse over an ad. The computer suddenly crashed and restarted. My husband then got a sudden error message on his computer.
"One of the files containing the System's registry data had to be recovered by use of a log or alternate copy. The recovery was successful" You could not get it to go away if you clicked ok. We restarted in manually because you were not able to get into start or any programs at all. I did get it to go away at one point but still could not get into any programs or start menu. I was trying to run an anti virus and also a clean up and fix of registry, but could not.
View 5 Replies
ADVERTISEMENT
Apr 23, 2007
I've been trying to do a XP Home Edition repair install for a very long time now. I've restarted it a lot of times but in the "Installing Windows" section when it says setup will approximately complete in 25 mintues it starts "copying files", I get this "copy error" "Setup cannot copy the file licwmi.dl_.Ensure that the disk labeled 'Windows XP Home Edition Service Pack 1 CD' is in the drive section below, or provide the location where the file can be found."
View 13 Replies
View Related
May 1, 2009
After a PSU failed and took my motherboard with it, I decided to build a new system and move my hard drive. Of course XP wouldn't boot. Since I didn't have an XP disc on hand (old system came with XP preloaded), I purchased Vista figuring I might be able to do an in-place upgrade (i could use 64-bit anyways). This didn't work as the Vista upgrade demanded to be started from within windows. I downloaded a clean version of XP w/ bittorrent and attempted a repair install. This seemed to go fine until setup restarted to complete the installation. Now XP restarts automatically on the loading screen and if I start in safe mode, I get the message "Windows XP Setup cannot run under Safemode."
View 4 Replies
View Related
Oct 27, 2008
Started the pc w/the XP Home SP2 cd in, and followed prompts to do a repair install. All was going well. Got to the point of it needing to restart the computer. After the Windows logo appeared, received STOP error 7E, with no driver mentioned. (1st variable if needed is 0x0000006). Turned machine off, restarted. Same thing. Tried again, this time trying Safe Mode. I get the message "Setup cannot continue in Safe Mode, Click OK to restart".
View 9 Replies
View Related
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Jul 21, 2005
I tried to install USB Wireless network adapter to my XP system(OFFICECONNECT WIRELESS 11g USB ADAPTER). Not only that I couldn't establish a connection through that new wireless adapter I also lost my regular PCI network adapter couldn't connect via the PCI adaptor and couldn't set it's TCP/IP configurations I uninstalled the TCP/IP and when I tried to reinstall I got: "The name is already in use as a service name or service display name".
View 2 Replies
View Related
Mar 20, 2010
I get intallshield error "1628: Failed to complete installation" when I am trying to uninstall some software I don't want.
View 1 Replies
View Related
Mar 29, 2008
Recently my video card died, and so my system went kaput. Originally I had thought it might be a driver problem so I uninstalled all Nvidia drivers from my system - including by accident my motherboard chipset drivers (I have an Asus A8N-SLI).Now when I try to boot with a new video card swapped in I get an endless reboot cycle. I disabled automatic rebooting and I got a blue screen with STOP 0x0000007B. I do have a clean installation of windows on another partition that I keep around for troubleshooting, and that works fine.Is there any way to save my current installation short of a complete reinstall?
View 1 Replies
View Related
Sep 7, 2008
i'm having this problem with service pack 3 installation.i'm running windows xp home with service pack 2. A balloon just came up the other day wanting to install service pack 3. I should say it was an update balloon. I would let it begin installation but after about 20 min. I would get this service pack 3 setup error box.Service pack 3 installation did not complete.Select ok to undo the changes that have been made.I would let it undo the changes but everytime that i booted up i would get this update balloon. What do i do?
View 14 Replies
View Related
Nov 6, 2008
Having a problem with the install of Service Pack 3. The update keeps picking it up but halfway through the install a popup appears to say " an additional download is needed to complete the installation.Install service pack 3 again " . Well I have installed 6 times now and the same happens every time, it doesn't say what the additional download is or where to get it from. I'm running XP which has been taking forever to start up up recently ( about 15 mins ) don't know if it's related or not?
View 6 Replies
View Related
Oct 18, 2004
Make sure the BIOS is set to boot from the CD (put the CD above the HD in the boot order) Insert the XP CD and boot to it When you see " To setup Windows XP now, press ENTER", go ahead and press ENTER You will now see an option to repair Windows by pressing "R". Do not select this option - it will only take you to the Recovery Console which is not what we want to do. Instead, choose to continue the installation When you see the license agreement, press F8 to agree On the next screen make sure your current XP installation is selected and then press "R" to repair XP At this point XP will begin to install on top of itself, replacing damaged, missing or altered system files. Follow the instructions on the remaining screens to complete the Repair Install. It will look very much like a normal (new) OS installation. If all goes well your repaired XP installation will remain iintact, keeping your personalized settings and installed programs as they originally were. Remember, choose the second repair option, not the first.
View 9 Replies
View Related
Sep 28, 2010
I purchased the Dell Inspiron 1525 laptop about 2 years ago. It shipped with Vista at the time, but I installed XP on the partition Vista was installed on and have been using it happily ever since. There is a common problem as it turns out, after having read through other forums, that used to exist with Dell laptops, including mine and that is that they would come shipped with the Mediadirect button. When pressed, it supposedly boots the laptop to another partition, which would start up a multimedia software that can playback CDs, DVDs and/or other media files on the accessible storage. The critical and serious issue is that once this button is pressed and you try to turn on the laptop normally again (boot into Windows), it would not boot up, producing the Invalid partition table error at boot-up, suggesting that the former process messes up the boot record somehow.
The same thing happened to me before. A quick suggested fix was to press the button again. While it didn't solve the issue, it at least booted in the right partition, but complained about an ntfs sys file not being there. I solved this myself by repairing the existing Win XP Pro SP3 installation via an XP SP2 CD, which reverted back SP3 to SP2 without much hassle, surprisingly, and Windows booted up normally. I just had to manually update the system to SP3 again using Windows update and that was all. Other software like IE and WMP were also reverted, but reinstalled to the latest version manually.
View 1 Replies
View Related
Apr 23, 2010
Everything was running fine with my desktop PC till I turned it on this morning. It booted fine, Windows XP started and I entered my password. My desktop background appeared as standard but i had no taskbar, no start button and i was geting no response from either my right or left mouse buttons from clicking on the screen. I tried to get into task manager by using CTRL+ALT+DEL hoping I could get my explorer processes running again, but nothing happened other than a brief appearance of an egg timer. I powered down and started again hoping it was just a glitch. I was too optimistic. So I tried again, again and again achieving the same results. I had no luck getting into task manager or accessing any functions at all. I assumed that if explorer wasnt providing me with rudimentary functionality and if task manager was refusing to work either my only option was to attempt a repair installation of XP using my Windows setup disk to fix the problems.
View 1 Replies
View Related
Mar 22, 2005
I can find tons of tutorials on how to do a repair installation, but am having a hard time finding anything which actually describes what the repair installation does. Does it only replace the whole hive? Does it do more than replacing damaged hives through recovery console? What system files are affected? I ask because I did a repair installation last week and to my surprise it didn't even touch a windows application data folder which held a .pst file. Which led me to wonder what folders are "repaired", and to what extent. Links are okay. Just so you know I am not looking how to do it. Only what it does.
View 14 Replies
View Related
Apr 9, 2006
Does WinXP Home CD have the repair option as Pro does?
View 3 Replies
View Related
Mar 8, 2007
After downloading something BraveSentry http://www.bleepingcomputer.com/forums/topic55983.html
appeared and many new startup items,tryed to to stop process from taskmanager but the viruses blocked access to it and i used this to fix it http://windowsxp.mvps.org/Taskmanager_error.htm
tryed to stop processes and the following errors came in a blue screen 0X00000050 (0XE4191000, 0X3600000000, 0X804F2BR0, 0X00000001)
View 6 Replies
View Related
Mar 28, 2010
First time poster; having an issue with a Windows XP repair installation. More specifically, during the repair installation process I am presented with this error message:"Files Needed The file 'asms' on Windows XP Professional Service Pack 2 CD is needed. Type the path where the file is located, and then click OK. Copy files from: D: . . . " Note that the Windows XP DVD includes Service Pack 2. Also note that when the error message presents, the CD-ROM essentially goes dead.
View 2 Replies
View Related
Apr 28, 2005
I want to know how to repair windows installation without losing ANY files.
View 5 Replies
View Related
May 21, 2005
I read somewhere that I could do a repair installation to see if I could fix it. Well I go through the usual steps until I get to registering components where it goes for about a minute and then restarts. I thought thats what its suppose to do so I wait and wait and it goes through the whole process over so I go through it about 10 times before I realize something is wrong. So I go on my brother's laptop and look up whats wrong and I try opening the comand prompt by pressing shift+F10 and then typing "control sysdm.cpl" to get to the system in the control panel
View 14 Replies
View Related
Nov 11, 2008
Require help on my windows xp SP2 Harddrive in question : 1 system and 1 boot Installed a game(test drive unlimited) but had a problem and on Securom support page i was told to delete everything in outDevices(Registry Editor) and was told it will be recreated upon reboot.
However,when i rebooted my computer,i was able to pass the POST,but i did not get into the windows boot screen.
View 1 Replies
View Related
Feb 12, 2009
In response to this I attempted to use System Restore. This failed, for some reason after selecting the restore date, clicking next did nothing. I then decided to go on a deleting spree, removing all unnecessary folders, programs etc. Somewhere along the line I must not have been paying attention and deleted the i386 folder. Of course, all hell broke loose and I couldnt even log into any users be it safe mode or not (I got automatically logged out).
Now to the real problem: The setup gets to 34 minutes remaining and encounters some problems while installing devices. A number of pop up messages appear, After that last pop-up, the keyboard and mouse promptly freeze, and a final pop-up appears replacing the italics line with "Conexant D850 56K V.9x DFVc Modem". Unfortunately I now cant click yes or no, and therefore cant continue with the setup.
View 11 Replies
View Related
Sep 26, 2006
How does one create a repair / re-installation CD for a Windows XP Media Center 2005 PC?I know how to create a repair / re-installation CD for Windows XP Pro & Windows XP Home, if one's PC does not come with a Windows CD I have searched the internet using multiple search engines and multiple search terms.
View 14 Replies
View Related
Dec 29, 2005
Due to several fundamental errors in my Windows installation, today I decided to make a repair install of my Windows XP Home installation. I booted into my Windows disc, did all the normal stuff, and it seemed to go fine. At the end of the text-based stuff, it gave me the instruction to reboot, having moved the files it needed to the HDD, I believe. Anyway, the jist is that the text-based stuff seemed to go fine, I rebooted as instructed, and then did NOT click to boot from the CD (which, I believe, was the right choice). I let Windows load normally but... no GUI based stuff came up to finish off the repair installation, and consequently, what I've done seems to have had no effect whatsoever.
View 5 Replies
View Related
Oct 21, 2009
I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
View 5 Replies
View Related
Aug 1, 2005
I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
View 2 Replies
View Related
Aug 24, 2005
Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
View 14 Replies
View Related
Nov 30, 2008
I recently had a bad hard drive (It need the windows xp cd to boot) and saw that the problem was bad blocks. I decide to buy a new hard drive and use ghost to clone it. But, now i have the same problem with the new hard drive. After a while, i realize that obviously, if the disk was cloned, ONLY the information that can be copied was transfered to the other one.In conclusion, how can I resolve this issue without using system repair. the problem is that once i use this tool and then IE won't work. at last I had to format the drive.
View 2 Replies
View Related
May 4, 2007
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
View 7 Replies
View Related
Oct 9, 2006
I am planning to reformat my desktop this weekend. I currently have Windows ME,upgraded to Windows XP Home. I would like to buy the complete Windows XP Home (with SP2) so I can have a nice clean (and hopefully easy!) reformatting experience. Am I allowed to sell my old Windows XP Home "Upgrade" software to else on Ebay I have all the cumentation and serial numbers. Is there anything else I need to provide to a potential buyer It would be nice to recoup some of the cost of my new Window
View 1 Replies
View Related
Jul 26, 2005
I cannot seem to install SP2. Every time I try, it freezes up somewhere in the middle. I just tried last night, and it never made it past the first message. Something like "Initializing installation". It doesn't sound like the hard drive is doing anything. When I try to cancel the install, it will then freeze on the "Cancelling Installation" message. The only way out is to "End Task". The furthest I got was one time when it seemed to finish installing, but when it rebooted, my system was at 640 x 480 resolution, and still at SP1! I then ran a System Restore and got back to where I originally was, minus a bunch of security patches, even though the point I restored should have already had those patches
Notes:
-When trying to install, I let it run OVERNIGHT, so it has plenty of time to work.)
-System is clean of Spyware, Viruses, etc.
-System performance is pretty good, although I do get an occasional blue screen, hence the reason I'm finally trying to update.
Does anyone have any idea how to troubleshoot this?
View 3 Replies
View Related
Mar 18, 2006
My laptop (Presario 2700) froze last night. I tried to restart it several times and it completely stops at the Windows XP screen. Running the Home edition. Even in safe mode, it stops at the XP screen.
View 2 Replies
View Related
