I have a laptop with a proprietary CD that will only reformat the hard drive and load a ghost XP operating system. Is there any way to repair XP without having a MS XP disk, short of buying a MS XP system disk? By the way, I cannot stress enough the importance of backups. I use an external USB HD and do weekly full and daily differentials with NTBACKUP. When my laptop HD crashed, I was able to easily recover 100% of my files (less XP restore points, of course).
I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
I recently had a bad hard drive (It need the windows xp cd to boot) and saw that the problem was bad blocks. I decide to buy a new hard drive and use ghost to clone it. But, now i have the same problem with the new hard drive. After a while, i realize that obviously, if the disk was cloned, ONLY the information that can be copied was transfered to the other one.In conclusion, how can I resolve this issue without using system repair. the problem is that once i use this tool and then IE won't work. at last I had to format the drive.
I've done a bit of searching on here and thought I'd found a way out of my problem but it seems not. Briefly my PC keeps looping on start up, it won't start in safe mode, last known config etc, so after reading here I've popped in a XP CD to do a repair but from instructions I didn't chose the 'r' function but pressed 'enter' to start the setup. I accepted the licence agreement and the PC found 2 partitions but I don't get the option to 'repair'. All I can do is 'end' the setup as I don't want to wipe my data
I upgraded from xp pro sp2 to sp3 and after that computer was very slow. So I repaired SP3 and during that process it started asking for 'asms' file. Even though the sp3 cd(which i burnt from a ISO image) had the asms folder it does seem to sense the cd. I am really stuck now because, even if I reboot my pc without the cd it goes to windows setup asks for 'asms' file. Even in safe mode it says windows setup cannot proceed in safe mode it reboots.Kindly help me on what can I do now so that either i can get thru with the 'asms' file or is there a way I can revert back to sp2 and do any possible recovery so that I can go into windows and backup my files.
Right now I am having big problems with my PC. I cannot load Windows or boot in safe mode because I get this error message: MSVPC60.dll is missing, etc... .After that, the PC just hangs to a black screen. - I cannot repair Windows XP using traditional methods found on Google, such as booting with the Windows CD and going into setup and then repairing ( not using recovery console). Second, I have already tried one method in the recovery console : http://www.short-media.com/articles/repair_windows_xp, This method has eliminated a few errors ( Im now down to only MSVPC60 ) but it is enough to prevent me from doing anything.
I'm trying to run a repair on windows xp, using the installation disk. I get to the point where I am suppose to choose the operation system that I want to repair but it is not there. It gives me the correct drive but there is no indication of the operating system. Since it is not there I can not choose "r" to repair. My only option is to install of quit. I'm guessing something happened when I originally installed xp.
Does anyone know how to repair the recycle bin? Icon works fine, but once the program is opened, all that happens is the flashlight looking for files and folders to delete.
I want to connect to the internet but the network card won't work. when i right click and choose repair. it says can't repair TCP/IP is disabled. The problem started when we wanted to connect another computer and changed some settings now i can't figure out wat to do. I called the Cable ISP they say that something is wrong witht the settings of computer of network card.
I need to re-install XP pro because I have been having issues. I want to do it so I dont loose everything so I wanted to re-install from boot. I checked my settings to be sure I boot from cd first and it does. Well I get to the point where I can hit any key to boot from cd and the system then continues on to load from the harddrive. The cd never starts. I finally went and opened the cd from the drive itself. One of the choices then is to install XP but it mentions I would loose everything.The CD is Xp Pro full version dist with new systems. What am I doing wrong? Its been a long time since I re-installed.
Make sure the BIOS is set to boot from the CD (put the CD above the HD in the boot order) Insert the XP CD and boot to it When you see " To setup Windows XP now, press ENTER", go ahead and press ENTER You will now see an option to repair Windows by pressing "R". Do not select this option - it will only take you to the Recovery Console which is not what we want to do. Instead, choose to continue the installation When you see the license agreement, press F8 to agree On the next screen make sure your current XP installation is selected and then press "R" to repair XP At this point XP will begin to install on top of itself, replacing damaged, missing or altered system files. Follow the instructions on the remaining screens to complete the Repair Install. It will look very much like a normal (new) OS installation. If all goes well your repaired XP installation will remain iintact, keeping your personalized settings and installed programs as they originally were. Remember, choose the second repair option, not the first.
If I try to install add on Windows XP programs from the CD (such as the toolbar sound control) I get a message that my msnmsn.inf file can not be opened and is damaged. How can I fix it? Where does it belong? I think during installation on this new hard drive I had a problem. I have SP3 now.
So I started up my computer a few days ago to find it telling me I had a missing or corrupt file in windowssystem32configsystem. Now when I bought my computer I was sold the XP home license, and it just came with my computer, and have never needed the setup CD.So I went to the place I bought it, told them what happened they burned me a copy.So I boot off the cd, and enter the setup repair, it asks me for a password, I have never had one, default past with enter and continue on to try and fix it.Now this is where it gets interesting, I restarted to see if I had fixed the problem, and when it restarted my computer seemed to begin to load windows, when my computer suffered a LSASS.exe error, and restarts. So it eventually allows me to go back to the setup repair, but this time when it asks for a password, it doesn't allow me to default past by hitting enter. It tells me I have entered an incorrect admin password and after 3 tries, it says I have failed 3 times and then restarts.So I Googled the problem, and found it might have something to do with Sysrep(which im not familiar with) I have some important files on the computer I need rescued. Basically what I am wondering is if there is a way to bypass this new password problem, or any way I could extract certain files from my hard drive without repairing windows.
On yahoo home page was holding mouse over an ad. The computer suddenly crashed and restarted. My husband then got a sudden error message on his computer.
"One of the files containing the System's registry data had to be recovered by use of a log or alternate copy. The recovery was successful" You could not get it to go away if you clicked ok. We restarted in manually because you were not able to get into start or any programs at all. I did get it to go away at one point but still could not get into any programs or start menu. I was trying to run an anti virus and also a clean up and fix of registry, but could not.
I'm trying to do a repair on my Windows XP and when I try to get into C:/Windows - it's asking me for an administrators password - I have no idea what that is. I tried my log in password but it says it's invalid.
I purchased the Dell Inspiron 1525 laptop about 2 years ago. It shipped with Vista at the time, but I installed XP on the partition Vista was installed on and have been using it happily ever since. There is a common problem as it turns out, after having read through other forums, that used to exist with Dell laptops, including mine and that is that they would come shipped with the Mediadirect button. When pressed, it supposedly boots the laptop to another partition, which would start up a multimedia software that can playback CDs, DVDs and/or other media files on the accessible storage. The critical and serious issue is that once this button is pressed and you try to turn on the laptop normally again (boot into Windows), it would not boot up, producing the Invalid partition table error at boot-up, suggesting that the former process messes up the boot record somehow.
The same thing happened to me before. A quick suggested fix was to press the button again. While it didn't solve the issue, it at least booted in the right partition, but complained about an ntfs sys file not being there. I solved this myself by repairing the existing Win XP Pro SP3 installation via an XP SP2 CD, which reverted back SP3 to SP2 without much hassle, surprisingly, and Windows booted up normally. I just had to manually update the system to SP3 again using Windows update and that was all. Other software like IE and WMP were also reverted, but reinstalled to the latest version manually.
I have this error on my computer C:windowssystem32undll32.exe I was advised to download a new rundll32 to repair mine but I can't find any where on Microsoft web site. I have or had a virus. I was running F secure online scan when these problems all started. I have an error KB8964225.log on my screen every time I restart.I cannot access many programs obviously as the rundll is the base for a lot of things. I cannot get into system restore.
posted a question in Multimedia here, http://forums.techguy.org/multimedia...ecognized.html and was working on a solution. Now I have no CD Drive, no keyboard, and no mouse.
My question is, if I install the problem harddrive into a desktop as a slave harddrive, will I be able to repair the damaged registry? If so, how? Please help as this was being done for a friend, and I really don't feel like buying him a new laptop.
It's been a while since I had to do this so I'm looking for a little refresher here. Just booted up on my XP partition with the message: "windowssystem32configsystem file missing or corrupt please use 'r' for repair. I know I've got to go through the repair recovery, but I can't remember if I use the fixboot from the DOS prompt or fixmbr. Any suggestions or cleaner way to fix this would be greatly appreciated, I guess if all fails it will be back to the dreaded fdisk.
I read somewhere here how to fix the fact that my system restore does not work, nothing happens if I click on a previous date. I don't know how long this has been going on because I don't think I have used it for a long time. I have Mcafee. I saw a thread here whoch I can't find again because it was a single thread from a Google search. After following instructions I noticed the date was 2004 and it was for Windows ME. It said something about going to windows explorer and finding a certain file "system" which isn't in XP.
When I get to the page after starting my computer by tapping the F8 key my computer goes to the webage where the page is covered with sentences. I wait and wait for it to go to the page where I can go to the webpage where I can use my arrow key to go up to my "safe Mode" and hit enter. For some reason my computer stops at the full pages of sentences. Once I would get into safe mode and proceed to System Restore my system would let me go back to a date when my computer was working properly.By the way if I use the regular method of Systyem Restore it goes through the process and at the end I get a message your computer cannot be restored to an ealier date, try another date.
I tried to repair the XP and been requested for password. As far as i remember there is no password set. Mine is Dell. Tried to install to other folder and it work. The problem now is, I cannot get the program installed in the first installed XP.
After long, hard fought battle against various ailments of my computer, My operating system decided to not run anymore. Of course after all this I decided to finally break down and buy a new computer (besides my machine was about 7 years old), but I do want to salvage some data from it. Now after doing some research, I read about the whole repair install and from this board even,I was wondering if any of you have tried this, how well it works,
Everything was running fine with my desktop PC till I turned it on this morning. It booted fine, Windows XP started and I entered my password. My desktop background appeared as standard but i had no taskbar, no start button and i was geting no response from either my right or left mouse buttons from clicking on the screen. I tried to get into task manager by using CTRL+ALT+DEL hoping I could get my explorer processes running again, but nothing happened other than a brief appearance of an egg timer. I powered down and started again hoping it was just a glitch. I was too optimistic. So I tried again, again and again achieving the same results. I had no luck getting into task manager or accessing any functions at all. I assumed that if explorer wasnt providing me with rudimentary functionality and if task manager was refusing to work either my only option was to attempt a repair installation of XP using my Windows setup disk to fix the problems.
I'm having all sorts of problems with my computer (Windows Explorer shutting down, DVD drive not reading blank or used DVD+Rs correctly, etc). Tried to repair using SFC /Scannow but since it says that there are files that are missing or replaced by other files it asks for the SP2 CD- which I don't have since it was an automatic download.
1. Any way to remove SP2? It's not listed in the add/remove programs? 2. If I put in the SP1a CD, will it repair Windows to the SP1A setting WITHOUT causing me to lose all my data? 3. Are there problems with the updates from last week because all the problems started after the seven automatic downloads. 4. Can I download the SP2 somewhere online and run it to correct the problems?
I can find tons of tutorials on how to do a repair installation, but am having a hard time finding anything which actually describes what the repair installation does. Does it only replace the whole hive? Does it do more than replacing damaged hives through recovery console? What system files are affected? I ask because I did a repair installation last week and to my surprise it didn't even touch a windows application data folder which held a .pst file. Which led me to wonder what folders are "repaired", and to what extent. Links are okay. Just so you know I am not looking how to do it. Only what it does.
