I just installed an internal sata dvd-r/-rw/+r/+rw drive ( F: ) and it is being recognized as a removable drive. The unplug/eject hardware icon shows up in the system tray. Never installed a SATA drive before so I don't know if this is normal for an internal sata dvd drive??
In the BIOS I set SATA=IDE. Only other option is Raid which I assume would be for a SATA HDD.
Anybody knows where can I find a board with 4 USB and 4 SATA(Internal) ports at the same board?
View 6 Replies View Relatedjust installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
View 5 Replies View RelatedLong story short - Athlon/mobo on old unit died, 3 hd's (all WD eide 80 [C:], 40 [F:], 80 [G:]) & 1.5 gb memory good until mobo failure. Had shop install new mobo along with intel duo processor, new ATI video card, reinstalled memory & both 80 hd. Installed WD SATA 160 [replacing WD 40 hd] & tried to make it master boot record. Had shop transfer files from old WD 80 [C:] MBR to SATA 160, leaving files on 80. Did an repair install of xp on old 80 hd. Wouldn't boot. Tried reinstall of xp on SATA 160 & rebooted. Able to do so, but couldn't access internet for updates. Got sp2 update disc from technician & updated, then restarted.
View 9 Replies View RelatedI have 2 Hard drive 80GB and 200GB. Windows XP SP2 in 80GB Hard Drive.I was using 200GB Segate SATA as single partion with lots of my photographi working files stored in it. Recently I installed a new hard 40 GB drive but wrongly installed Windows XP1 and my 200GB hardisk show my 128GB but no file in it. Again I used my old hard drive with 80GB (Windows XP SP2) and connected the 200GB hard drive. Drive Show (The disk in Drive D: is not formated. Do you want to format it now?) PPTD to fix the MBR and rebuild partition. But Now It shows 200GB but Not able to view any files and asking me to Format.
View 2 Replies View RelatedI have just installed new memory,new graphics card geforce 8800gt,new power supply,and new sata hard drive.
I have made a floppy disk from the motherboard cd for installing the drivers during windows instillation from my old pc first.
I switched on new pc to load windows and i get no signal on my monitor also my usb mouse and usb keyboard does not light up,iget power to motherboard and case fans +dvd drive,i have put my windows xp os disc into dvd drive and basically it does nothing.
Do i need to make a windows boot disc or something to start instillation.
I still have windows loaded on my secondary sata hdd but the system32 is corrupt,so i have opted to install new sata hdd,then transfer my files from secondary hdd,once that is done gonna format secondary drive and use it for storage.So i still have the option of entering the bios on my motherboard if i connect it up and disconnect the other drive.
I have left the drive disconnected while i install windows then gonna plug it in after windows installation.
SATA Drive not recognized as boot drive on XP installation.Need to create an Xp boot sector.I have been working on this for days. Successfully installed once and ended up with corrupted files on the Win98 partition, so want to get it right this time. (Don't remember how I did the "successful" install - after several days of various problems - most of which are now solved - I am a little brain-dead.What I am looking for is a way to create an XP boot on the SATA drive. I assume this means changing the MBR.
System: MotherB: Asus A7V600 with VIA Chipset
Drives: 0 120gb SATA; 1 15GB IDE; 2 10GB IDE
Current Status:Win98 and WinXP both operational but no dual boot. Win98 was installed first. Both systems were a clean install. Both systems installed on FAT32 in seperate partitions on the SATA drive. Computer startup simply goes into Win98, as there is no XP boot sector on the proper drive......
I was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies View Relatedthe computer is a SolidPPC50 515 Model, which has no internal CD-ROM or Floppy drive. I have an external USB CD-ROM and Floppy, but there are only 2 USB ports, and no PS/2 keyboard slot, so I've had to use a USB keyboard. Despite the BIOS being compatible with booting through USB, it doesn't recognise the CD-ROM, but it does recognise the Floppy. I tried using a bootable floppy with the I386 folder from the install CD copied to the Hard Drive (formatted as FAT32), but when I run WINNT.exe then try to change over the Floppy drive for the CD-ROM, it can't find the CD-ROM drive.
View 3 Replies View RelatedWhen I try to install SP3, after it has downloaded through Auto-update, it gives me internal error, without any codes or anything. Just says installation did not complete.
View 3 Replies View RelatedRunning XP Professional SP3. I am curious why Windows does not recognize an internal DVD ROM as a DVD? It sees it under My Computer as a CD Drive. But, if you put a DVD disc in the drive, then it sees it as a DVD..... THE DVD ROM is an LG Model GH22NP20.
View 3 Replies View RelatedI've been trying to install windows xp from a cd onto my dell c400 notebook which does not have an internal cd drive. Thus far I've tried to pre-load the installation files on the hard drive and boot from them, use windows PE to install off a network cd drive, and install off an external usb cd drive
View 14 Replies View Relatedmy friend keeps telling me to buy this: http://www.walmart.com/catalog/product.do?product_id=2349357
but i really have no idea what it will do for my computer, i dont really understand. could someone please explain it to me????
I have a Dell Dimension 8300 desktop with 80GB hard drive and 3 GB RAM. Dell do told me I can have only a total of 120GB hard drive on my machine. Dell forum said that is not right. The Dell manual states there is are 2 bays for 1" high hard drives and it gives installation directions for adding a second internal drive. I have 3 external hard drives for backups, photos and much of what I don't need or want on the C drive. I need to install more programs for photography since they can not be run from an external drive according to those I have asked.
View 10 Replies View RelatedWhile trying uninstall and re-install Microsoft antispyware, I am getting "Internal Error 2753 ".When searched, there is no GcasInstallHelper.exe file on my hard drives. I am disappointed to see the MS released such a buggy program.
View 9 Replies View RelatedI have a client with a DLink DI-804HV VPN Router. They need to connect with PPTP using the Windows XP "Network Connections". I am able to connect to the VPN with no problem. Their IP structure is 192.168.2.x subnet is 255.255.255.0 and DHCP is turned on with a range of 192.168.2.2 - 254 If I have a user from the PC #1 with 192.168.2.100 ping the PC #2 with 192.168.2.200 then he gets replies with no problem. If I ping him PC #1 (192.168.2.100) I get a reply through the VPN. If I ping PC #2 (192.168.2.200) I get no reply.
So, I had him take the PC #2 192.168.2.200 out of the network (unplug the ethernet) and manually change his IP PC#1 to 192.168.2.200 I cannot ping him. If he changes his IP to anything other than the one DHCP gives him I can't ping him. The only option I can find for the PPTP server settings in the DI-804HV is "Virtual IP of PPTP Server" which I have tried changing to 192.168.5.x and 10.0.0.x with no luck on either.
My problem is that I am trying to use a 60 GB ATA / 133 Maxtor DiamondMax Plus 9 Internal Hard Drive as an External Drive as a Slave and I am having trouble getting my bios to recognize it.The Hard Drive is hooked up in the same way as an Internal SATA DVD burner setup as an External DVD Burner that is running on Windows Office XP 2003 and it works fine. So what suggestion would you give me so that I maybe able to get the bios to recognize this drive?
View 2 Replies View RelatedI've recently put together an old computer using parts from 2 similar machines. The specs are..
Mobo: GA-K8VM800M
CPU: AMD Sempron 2800+ - o/ced to 2ghz tonight.
HDD: Master - Seagate, Slave - Maxtor both 70gb
Ram: 256 + 512 @ 400
Onboard VGA..
Standard 250V PSU
Okay so, i've been trying all night to install SP3 on this thing but every time I get this error "An Internal Error Occurred" and it's driving me crazy. I installed a fresh Windows XP SP2 on it and uninstalled the few updates I did through windows updates. I've cleaned the registry. I've done everything it says to do here: http://support.microsoft.com/kb/949384. I've tried installing it from the Windows updates page, i've tried installing it through Automatic updates and i've even downloaded the full SP3 Package (also tried this in safe-mode). I've read every freaking forum about this error and took their advice. Nothing works........
I recently did a system repair after having problems with Windows starting up, and I need to re-install sp2 for programs such as iTunes to work. When I try running the update wizard, it gets to the 'collecting inventory' (I think that's what it's called) stage, and then stops with an "An Internal Error Occured" message. Below I posted the data from svcpack.log.
[QUOTE]
================================================================================
3.937: 2008/05/18 22:35:36.268 (local)
3.937: f:a20f92d53e2234d8e995e0i386updateupdate.exe (version 5.5.1005.0)
3.937: Service Pack started with following command line:
4.093: Return Value From OnACPower = 1
4.093: OnACPower returned value( 0x1 ) which is Equal To 0x1
4.093: Condition succeeded for section OnACPower.Section in Line 1 of PreRequisite
4.093: SOFTWAREMicrosoftWindowsCurrentVersionSetupWindowsFeatures is not Present
4.093: First Condition in A6Block.Section Succeeded..................
I have a Maxtor internal 300gb drive that I've mounted in an external casing. The other day I knocked it over and ever since then when I turn it on it makes some kind of warning sound three times. The computer doesn't detect it anymore and I can't access any of the information on it
View 1 Replies View RelatedBefore I reinstall the OS,,, does anyone have the fix for DHCP issues. When I run ipconfig I get the internal error occured error. I have tried to retstart TCP/IP, I changed the name of the PC and ther group name then rebooted but notta.
View 3 Replies View RelatedI decided to help out an older friend upgrade their computer. I had an old tower lying around minus a Hard Drive, and I figured that I could remove my friends Hard Drive from his PC and pop it into my Tower and away he'd go. Well, it didn't work. The PC seemed to boot fine and showed the initial text, but when it came to the Windows XP loading-part of the boot process, the monitor flashed white for a millisecond then went blank and the power light turned to amber, then off altogether.I disabled my ATI Graphics card, then tried again with no luck so I looked in BIOS but couldn't get it to detect the drive which is a Seagate Barracuda 40GB drive.I did however notice that the HD was listed as Secondary Slave. I was able to move it up to Primary Slave by moving the jumper but couldn't set it as Master. I even tried with the jumper removed. In fact I don't recall whether or not there was a Secondary Master there is a DVD/CD Combo drive installed so maybe that was set as Secondary Master? I'm afraid I can't remember.
I then tried connecting the HD to the same cable as the DVD/CD drive with no luck. The HD is an IDE and my original HD was also a Seagate IDE drive. Also FWIW, the last time I used my Tower with an IDE HD installed ( only months ago) it all worked perfectly.After a few hours I called it a day.So, when I returned home I realised that the DVD/CD drive was probably throwing a spanner in the works and I should have unplugged it to see if that would get a result.Finally it dawned on me that my friends internal HD would have all the drivers pertaining to his particular set up (Mobo, etc) but not the drivers for my mobo and maybe that's why Windows didn't boot up.I'm left wondering if it's even possible to do what I'm trying to achieve, or would my friends IDE Hard Disc need to be wiped before installing it into my Tower? I have the ABIT VIA-1.31M driver disc that came with my mobo, but don't really know where to go from here other than to try to install the drivers for my Mobo onto my friends HD before I remove it from his PC and install it in the one I want to give to him ..
I have two burners in my system; one CD-R/W and one DVD-R/W. I usually burn everything on the DVD drive. However, after I burn something and place it back into the DVD drive to view the files, I can't. When I go to My Computer, right click on the DVD drive, I don't have the option to "OPEN". I do have this option on the CD-R/W drive but I'm wondering why I don't have that option on the DVD drive. This seems strange to me that I cannot do an OPEN on the right click with the DVD drive. any suggestions? I'm running WinXP Pro with all the updates, 2GB Ram.
View 8 Replies View Relatedbefore I install the new hard drive making this new drive the boot drive which will be replacing my existing "C" drive how I by to do this, my system is Compaq Presario with Windows XP Home Edition and has Drive "C" with 20GB, Drive "D" (which is the SYSTEM SAVE DRIVE) with 18GB, Slave Drive "G" with 98GB and I made a partition on this drive which is Drive "H" with 15GB, the new drive that I want to install is a Seagate with 120 GB.
View 14 Replies View RelatedEver wanted to convert your internal Zip Drive to a portable one? Purchase a Mobile Hard Disk Rack. Install your internal Zip Drive to the Rack. XP will automatically recognize the Zip Drive and you are good to go!
View 9 Replies View RelatedI am interested in adding a 3rd internal hard drive to my computer. All the connection are in use, so I need a way to connect the third hard drive. Is there a device i can buy that will allow me to conect the 3rd hard drive?
View 3 Replies View RelatedI'd like to add a floppy drive to my newish XP based desktop (which came without), and am debating whether to put in an internal drive or get an external USB drive. Since I don't expect to be using it a lot (mainly to read floppies from previous systems), I'm leaning toward the USB drive for reasons ranging from convenience to leaving a free bay for another hard drive,
View 3 Replies View RelatedWhat could make my usb on my windows xp stop working. When i plug in my impression to the usb drive it does not recognize it and i troubleshoot it and click where my device is and it tells me No drivers are installed for this device.
View 1 Replies View RelatedAnybody have any ideas off the top of their head as to the reasoning behind this error message? My D: drive is a cd/rw drive, not a hard drive..COM+ Event System detected a bad return code during its internal processing. HRESULT was C0000005 from line 44 of d:qxp_slpcomcom1xsrceventsier1eventsystemobj.cpp.
View 7 Replies View RelatedI had a spyware attack 2 days ago. Ive gotten most of it (i think!) but the computer seems to still be infected here are afew problems im having as well as my hijack log:1. User controle panel is not working the area is all white except for the part where it says back forward and home. 2. MSPaint, and wordpad seem to have disapeared 3 All the games, internet explorer and MSmedia player are not working. (I uninstalled media player and reinstalled it with a new download but still nothing i get an error saying "An internal application error has accured"
4. avast doesnt seem to uninstalling.
Boots up and can't get past the Norton Go Back.if I press the space bar,it will go to this message.Norton Goback internal error press any key to reboot, and when I do,it starts all over again only to get the same message.Sometimes, will show a diagram of I believe, the keyboard and computer with arrows pointing to F1 key in diagram, and at the top it says no operating system. So i got the XP disk, and completely formatted to RAW, and re-installed XP.Only to have it come back to the diagram thing saying no Operating System.
View 6 Replies View Related