I've Installed The New Drive But Still Not Installed
Sep 27, 2010
I've installed the new drive, formatted it two partitions, and installed my XP on the new drive. The old drive is still installed, and I can select which drive I am booting off of. Boot off the old drive, I'm on my old PC. Boot off the new one, I'm on the new.Only one of the XPs are active at a time. The other says it must be activated.
So, at this point, I boot to the old, and (with this OS activated)run the Files and Settings Transfer Wizard. I specify that I am saving the data on one of the drives in the PC. It runs and says it's successful. Then I boot off the new drive and (now with THIS OS activated) when I point the FAST to the directory where I saved the files, the wizard says there's no files there to load. I can see .dat files in the directory, but the wizard can't.
View 5 Replies
ADVERTISEMENT
Jun 25, 2006
I had to use fdisk and format my hard drive for various reasons but I must have done something wrong I installed my operating system xp pro onto the hard drive but now when I go to my computer I find I have another drive called f:drive and this is now my major drive (the biggest) I still have c:drive but it is not very large so f:drive has become my main drive where my operating system and all files are. Apart from this my pc's working perfect, can this configuration do any harm if it can is their any way to make c:drive my main drive again?
View 14 Replies
View Related
May 18, 2009
I forgot to unplug my zip drive when replacing my fried hard drive, so the installation of the system OS was assigned "E drive".I had already partitioned it, and was able to install another version of XP on the other partition, thinking I could just delete the first one, but it didn't work. I can't install or uninstall anything because all the installation programs are looking for C to be the system partition, which it's not. If I can wipe out everything (no data to lose), and start over, it'd be easier, but I can't uninstall XP for the same reason. Any suggestions? I've already spent hours trying to find a solution, and it may be cheaper to buy another new hard drive.
View 12 Replies
View Related
Sep 6, 2008
My external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies
View Related
Aug 4, 2005
I recently had to reinstall windows XP to get rid of spyware. When I restarted windows, I noticed that my drive letters were not right. For instance,my hard drive is letter (H) instead of C. My floppy drive is correct (A). How do I change the letter back to C for my hard drive?
View 6 Replies
View Related
Jan 17, 2009
I recently re-installed xp on my desktop after a long run with ubuntu. After installing XP, and getting everything together, it made the local disk G. Is it possible to change this to C? Without too much damage?
View 6 Replies
View Related
Jan 4, 2007
I installed a brand spanking new HDD into a machine. Used the XP setup disk to format the HDD and ran thru the complete installation. It as too late before I noticed that the boot drive was designated as F instead of C. I thought it had to do with the way the IDE cables or the power plug are sequenced inside, but apparently you cannot change the drive letter for the boot drive. It is not too late to re do the install, but how can I designate HDD as C instead of F.I don't even know why it would do that.Would there be any problems with keeping the boot drive as F instead of C?I am giving this PC to someone since I don't need it, but I have never had the boot drive other than C before.
View 6 Replies
View Related
Sep 7, 2005
I have a second hard drive installed on my computer. Lets call this F:My main hard drive, were I am running WXP SP2, Home Ed., and were my program files are kept. Lets Call this drive C:IP3, 733mhz, 384 mb, HOMEMADE. works well, very happy $5.99 OBO.I am filling up C: and have tons of room on F:. Can I put program files on F:, easily that my computer will recognize and be able to use effectivley and effciently? With out jack-ups? Yes I understand that this an imperfect world, but If I could do what I wish within this situation, I will be closer to.
View 7 Replies
View Related
Jul 30, 2005
Not sure what is going on here, but my XP system is finding a 3rd drive which is a 'AXV CD/DVD-ROM ScSi Cdrom device'. The only thing I can figure is it has to do something with the zip drive.I have a cd burner and dvd burner also, both of which are detected and work correctly.I have tried to uninstall it but it keeps coming back. What could be causing this? My system suddenly just reboots when playing games now also. I have run spyware, antivirus and hijackthis to find something and nothing comes up. I'm thinking the sudden reboot is related.
View 2 Replies
View Related
Jun 5, 2010
i have use more than 10 disk of windows xp to format compaq pressario v3000.. when i press enter to format.. it shown that the hard drive is not installed. what should i do sir?
View 1 Replies
View Related
Feb 24, 2007
Hope this all makes sense... To cut a long story short, i have ended up with 2 versions of XP on the same partition of my hard drive. I know this is always a bad idea but it wasn't me who did it! The person who installed both also partitoned my hard drive into two sections, 40gb and 20gb....so i now have XP pro and XP Home installed on the same partition. Anyway i used partition magic to merge the 2 sections together as it was confusing issues.
Basically- What i want to do is start fresh with one working version of Windows XP Pro on my computer. I've tried inserting the XP Pro CD and telling it to install a fresh copy, overwriting all other versions of windows- but it has only overwritten XP Home and i'm left with 2 versions of XP Pro, and my computer asks me which one i want to start on start-up. So how should i go about removing one of the versions? Would formatting my C-Drive do the trick, followed by installing XP Pro from the CD again?
View 8 Replies
View Related
Aug 24, 2008
In addition to my other posting here, I want to ask you professionals, if it is possible to mirror my existing hard drive onto a much larger hard drive?My partition C became way too small over the years, the Windows XP files have blown up their size. Partition D (which contains all installed programs) is still fine. But I was never able to use software like "Partition Magic" to adjust the space between these two partitions.So I might just have to buy a new hard drive. But I want - I even HAVE - to keep the installed XP the way it is now. Lots of software installed. So I wonder, if there is any way just to "mirror" the existing version of XP onto a new hard drive, and then just to exchange the old hard drive with the new one?
View 9 Replies
View Related
Feb 8, 2009
I have a 2nd hard drive installed on my computer and i noticed yesterday that everything on it except for one folder has been deleted everything from my music to my videos. However, when i check the properties of the hard drive it still shows that space is being taken up on that 2nd hard drive as if all my files are still there. I went into my itunes and tried to play the music i have on my 2nd hard drive through itunes and to my surprise it still plays which it shouldn't if the files had in fact been deleted.
View 8 Replies
View Related
Mar 6, 2006
I recently reinstalled XP Pro and my HDD drive letters are all screwed up. I hear you can remap the drives within Windows, but I'm not sure how. Is it possible? If not I'll just reinstall and unplug my storage drive and that'll solve the problem. System in question is in my signature.
View 1 Replies
View Related
Jan 24, 2009
installed second hard drive,moved program files from c drive to folder i created in new drive.installed farcry onto new folder.but farcry files where scattered allover & not in folder of its own.uninstalled farcry with program called my uninstaller.pc then froze couldnt get into task manager,so switched off pc.when i restarted,disaster, folder in new drive had gone along with my programs ,mostly games,
View 1 Replies
View Related
Jul 22, 2005
Help. I've installed a 2nd hard drive (windows XP). Everything went
smoothly, however, when I was prompted to copy all files over to the
new drive, I opted not to do so, not realizing that would cause me to
not be able to install programs on that drive. Now my new drive is
just used for storing music, pictures and movies. Please tell me what
I'd need to do so I can install programs on that drive. Thanks
View 6 Replies
View Related
Sep 26, 2005
Laptop is a Compaq Presario 2500 WinXP Home 2.6GHz 1gb (512x2) 333 DDR SDRAM Built in 802.11b/g 80gb hard drive, installed about 4 months ago DVDRW drive, installed about 4 months ago The DVDRW drive replaced a DVDR drive, and the problem was present before that. PowerDVD The computer hangs up or stutters while viewing DVD's. Ad-Aware and Spybot S&D say I'm clean. What else should I check?
View 10 Replies
View Related
Feb 12, 2006
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
View 4 Replies
View Related
Sep 16, 2006
just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
View 5 Replies
View Related
Sep 13, 2007
just installed a new maxtor 300g drive. getting windows - no disk (error).
View 7 Replies
View Related
Apr 17, 2006
When trying to install farstone virtual drive on a computer it reboots during the driver installation phase. After the reboot at the desktop windows says new hardware found and asks to install it. It's the offending driver, fcdabios. Windows installs it and says it was installed successfully. Then the computer spontaneously reboots again. It seems to start alright back at the desktop but again reboots after 2 minutes. The only cure is to do a restore from a norton ghost image. I sent a debug file to farstone but haven't received a reply yet.
View 2 Replies
View Related
Apr 14, 2007
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
View 6 Replies
View Related
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
Oct 22, 2007
Installed new hard drive, along with XP Home (recovery disk).Before my system crashed all my motherboard drivers were on D: partition.XP loads okay, but it is unstable - for example I cannot start msconfig under "Normal" start up. It crashes. I will not list all the BSOD - but XP doesn't like something.I have no devices connected apart from basic graphics card (which XP loaded the drivers for okay). I am waiting for XP Pro to be delivered, so I am hoping that my unstable XP will become stable after I upgrade (or full installation) of a retail version.
Prior to installing my current XP (one time of at least 30 others - as kept crashing),I tried to load my motherboard drivers from the disk my manufacture supplied.is it possible that my XP Home is unstable BECAUSE I do not have my motherboard drivers loaded? That might seem a naive question - but I honestly do not know, and I've started to become a tad paranoid as these problems have been ongoing for 5 weeks.
View 8 Replies
View Related
Feb 3, 2010
I just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
View 6 Replies
View Related
Jan 1, 2005
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
View 1 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Feb 21, 2005
I just installed Windows Xp on a brand new HDD. The previous hard drive had Windows 2000, and since I didn't want to lose any files I installed that drive as the slave. But when I boot the machine up. And select the slave drive, none of the files, such as pictures, word docs, etc. are there. The folders are blank. The jumper pin setting is correct because the picture is right on the label for the drive
View 5 Replies
View Related
Jan 10, 2006
I have recently had a few minor problems with my pc so I decided to try to repair it with my Windows XP disc. What I actually ended up doing was to reinstall windows xp again and now my pc is back to the day it was made, well almost. None of my other programs are installed but they are still on the "C" drive. Everything is still there.
Now my question is, How do I restore my PC to before I put my darn XP disc in my machine?(I have already tried a system restore but it wont go back far enough).
View 7 Replies
View Related
May 18, 2010
Ive installed xp pro and formatted my hard drive after i had a nasty virus which basicly stopped my computer from booting. However for some reason it seems like ex pro hasnt picked up any of my drivers at all, like i have no sound no internet. Im not really sure what to do im sure my first step would be getting onto the internet but my ethernet is plugged in nothing shows on my connections and i am unable to create a new conection, sorry if i havnt explained myself very well my computer skills arnt great.
View 14 Replies
View Related
