I have a new External Firewire drive. It has been formated NTFS. In the Disk Managment should it be set Active? I've read that the boot partition must be set Active but this isn't a boot partition.
View 6 RepliesNew HDD-Disk Managment -Drive size is displayed as less?Evening Guys, Just after a bit of help from you.Just been out and purchased a 250GB PATA HHD to use as a slave.Fitted the new drive as normal and booted the PC.Located the drive in Disk Management, Right clicked the DISK 0 which was the new unallocated drive, and clicked initialize, The drive is showing as 31.49GB Unallocated, As the drive has not been formatted as yet i thought this would be the reason why, Right clicked the 31.49GB Unallocated, selected new partition and the "wizard" will only allow a maximum of 31GB drive partition.As this is a 250 gb drive, i need this to be larger, ideally 250 GB before format.Please can you advise how i go about formatting the drive and increasing the size?
View 14 Replies View RelatedI have an odd issue with diskmgmt.msc or the disk managment feature of computer management (both the same thing). Anyway, it displays my fixed hard drive in my laptop just fine, however my SD/MMC cards, CD/DVD drives, external drives, etc.....do not show up. They are recognized however, and I can access my drive G: (the SD card) just fine through explorer and my computer. Is there any reason why they're not showing up in my disk management console? and is there a way to fix this?
View 4 Replies View RelatedI have 2 internal IDE HDD's and an external IcyBox USB2 self powered enclosure with a Maxtor 160GB 7200RPM HDD in it. The external HDD is divided into 4x40GB partitions.
Running CHECKDSK on the internal drives is no problem but when I try it on a partition on the external one it goes through Phase1, Phase 2, sometimes reaches Phase 3 then hangs and if left PC switches off. Second time it hung looked at Performance tab in Task Manager and CPU was at 100% and I could hear CPU fan revving up, obviously CPU was overheating and shutting down.Looking in Event Viewer there are a large number of disk errors. Properties says: "The device,DeviceHarddisk2D, has a bad block".Clicking on the MS link tells me:the disk itself failing or the electronics on the IcyBox
enclosure, the data on the disk is accessible and readable? Are there any known problems with this type of external HDD? The problem only came to light when I tried to merge partitions on external HDD using Partition Magic and it couldn't be done because of errors.
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
View 4 Replies View RelatedWell I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View Relatedquality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies View RelatedAfter working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies View RelatedI have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies View Relatedi connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies View RelatedI've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
When I power down my Seagate external disk drive after completing a backup, Windows XP reboots itself. The disk is connected via firewire. The drive otherwise seems to be working properly. XP is up to date.My neighbor said he had the same problem when disconnecting his USB camera after downloading photos. The solution to his problem was to remove a recently applied microsoft fix. Unfortunately he no longer has a record of which fix
View 7 Replies View RelatedIve recently bought the "Enermax Laureate 3,5" HDD Enclosure Powered (USB 2.0)" and i put in a "Western Digital Caviar SE WD2500JB 250GB (7200rpm/uATA100)".
The problem is that i have a folder in there with the name "software" every time i want to access this file the external disk crashes and i need to turn off the power and turn it on again.The other folders works ok.i have erase and create again the file but nothing happens.i have the same folder with the same files in built-in hard disk and works perfecty.
I got me a 500 gig external disk, that does not come with much s/w. What are some good s/w out there that allow me to manage my backups. I have XP Home.
View 8 Replies View RelatedA SATA-II 250GB hard disk that I want to use to replace my C-Drive (10GB) and D-Drive (20GB),
But My C-Drive (Windows), when I boot how will I partition the new drive, make one ACTIVE and somehow LOAD the ghosted C-drive backup (can I put it on multiple DVDs and make them bootable or something?)
What would be the best way to "backup" these drives? Ghosting? Can this work with such LARGE drives as it would take multiple DVDs?
How to leave the other 3 PATA drives where they are or do I have to change them PATA slots (from Secondary to Primary or just leave them on Secondary and have Primary empty)
My 500GB External HDD is not accessible anymore. It was working yesterday when i used it with windows 7. It automatically ran the disk check on that system and it worked. When i plugged into the USB of my XP laptop and double clicked the drive in My Computer the following error message appeared: D: is not accessible. The file or directory is corrupted or unreadable. The drive letter shows on My Computer and Disk Management.
View 8 Replies View RelatedPlugged my external LaCie HDD in to my PC, as I always do and I had an SVCHOST.exe worm, apparently.. Which was healed by my AVG. Dunno how the hell I had a virus on my ext HDD in the first place. Now, when i try and access by ext HDD by double clicking its icon in "My Computer", I get the "Open With..." dialogue box. I can only browse my files by right-clicking and selecting "Explore".. Everything seems normal on the disk.
View 11 Replies View RelatedMy sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
I just would like to ask one more on this . Can I assign any available drive letter to a active partition that I create or does XP expect me to assign the next available in reverse order? As you can see in Disk Managment that I have Drives F;G;H;I listed and under Network Drives I have Q Thru Z. I thought my picture cards used Drives F;G;H;I ?
View 14 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
I have an interesting problem that shouldn't be too hard for you guys.I have three external hard-disks connected through a USB-HUB with my WinXP computer.Never had any problems whatsoever. The other day (that is, today) one of the disks didn't show up in 'My Computer'.So I did a right-click on my-computer-->manage-->disk management, like we all would do if a disk doesn't show up.The bar was there but it sayd 'Unallocated' or something like that if I recall.Basicly, it didn't have a drive letter assigned to it wich is pretty weird. Through some magic (that I don't quite remember), I got a drive letter assigned to it.It shows up in 'My Computer', so problem solved is what I thought Not even close.
View 14 Replies View RelatedI have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
View 6 Replies View RelatedLast night I connected a friend's HDD to my PC so he could back-up some files onto my PC before he formatted his.He did that,and then insisted that he needed to format it ASAP,so he did so using my cables.So I turn my PC on later I find that most of the contents of my desktop are missing,and that several Apps are as well.I look in C:Documents and Settings and notice a new profile called "TEMP" alongside my normal profile with many of My Documents and personal settings for apps. For some reason, my PC loads up this TEMP profile only now, as opposed to my normal one.
View 10 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedI have an external hard drive that I have assigned it a permanent hard drive letter reference through Disk Management. I have set the System Restore tab in My Computer Properties tab to not moniter this external hard drive K. Problem is that every now and then when I plug in every now and then for backing up my files via Briefcase - this will activate the System Restore function on that hard drive. This usually happens when I have the hard drive plugged in when I either turn off or turn on my computer. I stopped having the hard drive plugged in to hopefully stop the stop the System Restore on that hard drive (and then re-checked the System Restore tab)
View 12 Replies View RelatedI connected a 10GB HDD with Windows 2000 on it to a Windows XP machine using a USB 2.0 external drive enclosure. Apparently, I connected the HDD enclosure to a USB 1.1 port and XP advised me I could get better performance by connecting it to a USB 2.0 port.After some time, XP reported an error indicating it couldn't save E:$Mft (E: is the drive letter assigned to the external enclosure) due to a lazy write problem.I disconnected the external drive enclosure from the system and put it back in the laptop and when I boot the machine, it displays the "starting windows" screen, the progress bar goes to the end, and the machine reboots itself.
View 4 Replies View RelatedI just installed windows service pack 3 and now I'm having trouble with my external hard drive. when I go to My Computer, and click on it, it says it can't be accessed because of an I/O error. It's a Western Digital MyBook.
View 10 Replies View Related