I have a dual boot arrangement with 98SE and XP. In XP after switching on there is no sign of my DVD/CD-ROM drives in Windows explorer unles I go through the following sequence: Control Panel -> System -> Hardware -> Device Mngr -> IDE/ATA/ATAPI Controlers -> NVIDIA NFORCE MCP2 IDE Controller -> Right click , scan for Hardware Changes, then the DVD/CD-ROM drives appear and work perfectly
View 6 RepliesI have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies View RelatedI recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem.
- I've tried deleting the upper and lower filters but they are not in the selected registery.
- I've tried a system restore but i can't go back to a previous point before the registery fix install.
- I've tried unplugging the leads and restaring but this didn't help.
- I've tried microsoft guided help but it couldn't find the upper and lower filters.
- i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios.
I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies View RelatedI am using Windows XP Professional SP2 on an Asus A7N8X-E Deluxe MB. I have 5 internal HDD's and 2 external USB drives, I also have 2 DVD R/RW +- Dual Density drives, a Zip 250 and an Orb 2GB drive. So far this year I have had to reinstall my Windows like 8 times and done about 4 Windows repairs! Each time I seem to get 4 extra removable drives added to my system. In Disk Manager they are listed as "Generic STORAGE DEVICE USB Device", I have changed Device Usage to Do Not use this device (disable) and also I have uninstalled each device. Unfortunately, each time I restart the computer, they come back, shifting other drives to another drive letter.
View 5 Replies View RelatedI work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
View 1 Replies View RelatedJust reformatted my winxp machine which has 3hd's.Unfortunately I am only seeing "C" drive What the hell has happened ?I partioned all three drives and reinstalled XP on C
View 8 Replies View RelatedMy D & E drive totally disappeared i am so confused where did they go and most impotantly how do i get it back
View 14 Replies View RelatedI'm curious as to whether there would be a " Tweak for cd rom drives " to load also and not just exect
View 9 Replies View RelatedMy PC is getting confused my A drive is the same, my C drive is OK but my D drive is now my E drive and my E drive has been given the letter F, how can I get them back to the way they should be
View 2 Replies View RelatedMy computer is not recognizing my cd rom drives
View 2 Replies View RelatedI understand that XP/sp3 does not need drivers for cd rom drives - nec/rw and sony However,xp does not recognise my cd rom drives
View 5 Replies View RelatedSince upgrading to XP Pro from W2K a few weeks back my CDR and DVD drives are no longer recognised. In device manager an exclamation shows and I've been unable to find either an XP or more up to date driver. The drives in question are the NEC NR-7800A and NEC DV-5800A (In a Dell Dimesion 4300 machine) Does anyone have any idea on how I might approach getting these drives operating again
View 15 Replies View RelatedI have a friend who is having a problem with his laptop.I don't know what kind of laptop he has but the problem is his laptop cannot detect any cd/dvd rom drives. It will not detect the internal cd/dvd rom or an external dvd rom (connected thru usb2.0). It does however recognise the harddrive. He is using Windows 2000 OS. For obvious reasons he cannot put in the Win2000 CD and reinstall drivers (if that is what the problem is). So, does anyone know what could be wrong? I can get more information on the laptop if this would help.
View 12 Replies View RelatedI am a computer novice. My lap top has memory issues, it seems to be in 2 parts, C drive which is full and E data which is empty. Can these be combined as i can not install anything else because windows is teling me i have no memory space.
View 1 Replies View RelatedMy grandads cd-rom drive and cdwr drive are missing. There not in my computer or the device manager. I do not know when these went missing because my grandad does not use the drives often. I can still open the cd-rom drive and I can hear it loading, but I cannot open the cdwr drive. I tried a system restore point but that had no effect. So what do I need to do to get the drives back.
View 8 Replies View Relatedi have a new dvd burner in F and a new cd/dvd rom in E but the computer doesn't show this in my computer.
View 2 Replies View Relatedjust recently i was doing my usual bit and both cd/dvd drives droped out, after vigorous testing i found cdrom.sys and its shared componants refused to mount the drives as the service could not start, so i tried updating the drivers - no drivers more suitable than the ones i already have, my oppinion is the files are corrupt but it seems pretty hard to find replacments without individually going through the entire .cab database on the x64 disk, this is something i wish to avoid just incase its not even the problem.
View 5 Replies View RelatedI've this habit of installing softwares on different drives. The OS goes into C drive. Any other softwares that are from trustworthy sources goes into C drive along with the OS. I then install all the games, other softwares from not so trustworthy sources or any new programs I'm trying(like a typing tutor) in D drive. I keep E drive for storage purpose. This is my arrangement for my computer and on all of my friends computers on which I installed the Windows.
I thought it would help keep the OS safe(!) and reinstalling or upgrading would be easy and I don't have to reinstall all the softwares I installed. Am I right in that? What are these dll files. For any software I installed whether in C drive or D drive there seems to be a dll file in the C drive. 1) Does it really matter where I install the softwares(apart from the OS) or does having a seperate drive (usually D drive) for installing 3rd party softwares makes any sense?
2) Do I really have to install all the softwares (installed on D drive) again if I format and reinstall OS in C drive?
My laptop came with one harddisk and a DVD drive. These were initially C and D drives.I later used a partition software and made 3 partitions out of my single harddisk. I meant to have these as C: (original drive), D:, and E: Drives. How can I change the oder/visible sequence of drives as per my requirements?
View 2 Replies View RelatedAll of a sudden my CD drive and my new DVD burner are gone. They are still there but it is as if they were unplugged from my PC but they were not unplugged. I did some Windows Updates recently. Tried System Restore and it did not work. When I go into "My Computer" the 2 drives are just gone.
View 4 Replies View RelatedI recently recovered from this: But now my D: is in RAW format, and I want it to be able to read CDs again. Same with the E:.
View 13 Replies View RelatedHaving a major problem with my PC locating my Pinoneer DVD drive & my Sony CD drive. When I go into my device manager, both drives have a yellow dot with an explantion point. When I try to enable them, I get a message saying windows has located the driver but the hardware is not working. When I look under My Computer, the drives are not even listed under Storage Devices. I've even atempted to do a system restore but not matter what restore point I go back to, Windows says it's unable to restore from that point, choose another. I am far from a PC guru and don't really understand much technical stuff. Can someone help me get up & running again?
View 12 Replies View RelatedI have a Samsung SATA hard drive, a Sony CRX225 CD-RW and a Plextor PX-708A DVD-RW. I hadn't used the burners for a while, now they aren't working (can read from them but most of the time won't write). In the device managerdriveproperties, Win XP sees them all as SCSI devices. How is this possible? The BIOS has them as IDE primary and secondary drives, so where does the SCSI come in? Could this be part of the burning problem I am having?
View 3 Replies View Relatedwhen I open explorer there's no more CD or DVD drives shown anymore (and I've got one CD burner and one DVD ROM internally and one DVD Burner externally). This means I can't watch any more DVDs on my PC or burn any more discs.
View 7 Replies View RelatedI just installed a 320gb I had around in a spare PC. I was reading up on jumping everything and understood that I should set the main HD as master and the spare HD as slave on the primary IDE connector, then set my DVD drive as CS on the secondary.My problem is that the master and slave connectors on the ribbon cable aren't long enough to reach both drives.(only places the drives will fit) So I hooked everything up CS while I put the main HD on the primary IDE and then hooked the DVD and spare drive on the secondary IDE. Everything seems to work fine and I can see both drives and everything, but on bootup I have to go into the boot menu and pick the main HD to boot. Is it safe to run everything this way? And if so how do I fix the booting issue?
View 6 Replies View RelatedFresh install of windows XP.My computer has decided that connected usb drives do not exist.I can access them from Disk management. if I assign it a drive letter manually. But that is kind of hit or miss.This includes thumb drives and card readers.Other usb devices work fine.
View 14 Replies View RelatedA Dell Dimensions 2400 with Pentium 4, 256MB memory and a 80GB hard drive. He is running windows xp home edition. We opened up the tower to clean out all the dust using air cans. We were very careful not to touch any wiring or connections to the CD roms or hard drive. We were ready to install 256MB chip more of memory to make it 512MB. However he purchased the wrong chip so we did not install it. I did remove the memory stick it had to show him what to purchase. I then made sure we reinstalled it back properly and tightly. We also installed tune up 2006 and Norton system works to clean out his system. I had tested the cd roms and they seemed to be working. Then my nephew tried to install his I-pod software and the program did not open itself. He then went to my computer to open the software manually and realized that the d:/drive and the e:/drives were not showing. I tried updating the drivers with no luck. My next step was to delete the cd rom's in device manager and reboot the sysytem. The system recognized the hardware and installed the drivers but the cd roms still do not appear in My Computer. Any suggestions would be greatly appreciated. BTW I also tried to do a system restore to an earlier date but windows xp could not restore to an earlier date.
View 15 Replies View RelatedI have a regular CD drive and then a CD/DVD drive and neither one will read any disks. If I put something in, it will usually autorun, but it doesn't so I tried manually doing it, and it says the drive isn't accessible.
View 6 Replies View RelatedI have just got a pc with 2 dvd drives and a floppy drive, I'me not very clued up on media I think the top drive which is d:drive is a dvd rom which I think only plays dvd and cd's. The other drive while I know it is a dvd drive and I am thinking that this will be a burner drive. When I go to my computer I can only see the d:drive a:drive and c:drive should'ent there be an e:drive here as well: When I try to burn something using nero or roxio I am asked to put a disk in the d:drive should'ent this be the e:drive as thats what I think is the burning drive
View 12 Replies View RelatedI recently re-installed a fresh copy of Windows XP Pro because of a patched user32 virus that caused me problems it seems to be gone now since the re-install. But now since I re-installed Windows XP, my dvd and cd drives don't show up in Windows. In BIOS they are recognized as ch.0 master and ch.0 slave drives. But in Windows they're not there in My Computer or Device Manager. I pop in a disc and it spins around but nothing happens.
View 13 Replies View Related