I have a friend who is having a problem with his laptop.I don't know what kind of laptop he has but the problem is his laptop cannot detect any cd/dvd rom drives. It will not detect the internal cd/dvd rom or an external dvd rom (connected thru usb2.0). It does however recognise the harddrive. He is using Windows 2000 OS. For obvious reasons he cannot put in the Win2000 CD and reinstall drivers (if that is what the problem is). So, does anyone know what could be wrong? I can get more information on the laptop if this would help.
Having a major problem with my PC locating my Pinoneer DVD drive & my Sony CD drive. When I go into my device manager, both drives have a yellow dot with an explantion point. When I try to enable them, I get a message saying windows has located the driver but the hardware is not working. When I look under My Computer, the drives are not even listed under Storage Devices. I've even atempted to do a system restore but not matter what restore point I go back to, Windows says it's unable to restore from that point, choose another. I am far from a PC guru and don't really understand much technical stuff. Can someone help me get up & running again?
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
I recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem. - I've tried deleting the upper and lower filters but they are not in the selected registery. - I've tried a system restore but i can't go back to a previous point before the registery fix install. - I've tried unplugging the leads and restaring but this didn't help. - I've tried microsoft guided help but it couldn't find the upper and lower filters. - i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios. I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
I am using Windows XP Professional SP2 on an Asus A7N8X-E Deluxe MB. I have 5 internal HDD's and 2 external USB drives, I also have 2 DVD R/RW +- Dual Density drives, a Zip 250 and an Orb 2GB drive. So far this year I have had to reinstall my Windows like 8 times and done about 4 Windows repairs! Each time I seem to get 4 extra removable drives added to my system. In Disk Manager they are listed as "Generic STORAGE DEVICE USB Device", I have changed Device Usage to Do Not use this device (disable) and also I have uninstalled each device. Unfortunately, each time I restart the computer, they come back, shifting other drives to another drive letter.
I was trying to make a movie in Windows Movie Maker. I wanted to save it to a CD but I got an error message. "A recordable CD was not detected. Would you like to save your movie to the hard drive. Yes or No. I have Window XP Media Center Edition 2005. I let someone I know look at my computer he said I needed to replace the drive so I let him. Unfortunately I am still receiving the same message. I hope you can help or lead me in the right direction.
i noticed this when trying to install an app, Ever Note. it refused to install, claiming i was not using windows xp.. what? i've got xp SP2, but even in firefox's about tab i'm a w98 user! when i tried to install WMP11, i was sent to the w98's download page, which was quite frustrating (WMP9!)
I have a HT ready processor, Mobo, and chipset. Yet I do not have it running on my system. I have dealt with the mobo support, and they say I need a fresh install of windows. I can't do that because it is pre installed software. Bios does not give me the option, but even if it did it is supposed to be enabled by default. Is there anything in windows that anyone knows of that I may have turned off, or a way to enable or access it through windows. I have XP pro SP2.
I'm running Windows XP on a stand-alone pc. I have Norton Internet Security/Anti-Virus installed. I have encountered a pop up window (which will not go away) with the message "New Network Detected". It wants me to select home, office, etc.I don't have any windows firewall enabled, but have Norton taking care of it instead.The consensus I'm getting is get rid of Norton, it stinks. But I would think there could be something simpler/makes more sense to do.
Had my PC in Oct its a tiny by the way, since new it has had a fault when turned off ,but power still on at the mains, the phone rings the PC boots up, also lately is has been shutting down saying problem has been detected, and recovered from an error, i have restored it back to when it was working fine but still the same, tried to get hold of tiny but get a guy who i cant understand on the other end of line.
Ive a disk of 80 GB storage.formatted and partitioned it into 3 partitions, one NTFS, where i installed XP, and the other two FAT32.no other OS installed. now the problem is , it wont boot properly. i mean it starts booting, and where the welcome screen is supposed to come, it goes black. anyway, i noted in partition magic's Check for errors, dat the third partition had a few bad blocks, and ran chkdsk to correct the errors. i thote dat wud solve the problem.but it didn't.so i formatted a second time the last partition only (to FAT32 again), and then it was listed in partition magic,but couldnt be accessed anywhere, in command prompt or windows explorer.
Helping a friend with his computer (Gateway w/XP Home SP2) and discovered his floppy drive does not detect the floppy disk when it is inserted. I was attempting to created Ghost images from the floppy and it would boot into the OS instead of the bootable floppy. Checked BIOS and boot sequence was correct (2nd boot device). Tried 3 different disks still no joy. Clicked on A:/ drive in Windows Explorer (with floppy disk inserted) and got "Device not accessible". Checked floppy drive properties in Device Manager and it says device is operating normally.
I have not yet opened the tower to check connections, but to date the tower has never been opened since the computer was purchased a couple of years ago. I do not know whether the floppy has ever been actually used. My friend doesn't remember ever using it.Checked the bootable floppy in my computer and it worked just fine.
In reinstalling XP SP2; Monitor works, but only in 680/460 resolution and it cannot be changed. Device manager shows no monitor or driver. The correct driver is Intel 82865G and I cannot find it anywhere in the old files. Can't download it from the Intel site either (problem #2!) Also, I tried shutting down and disconnecting the monitor then restarting with the monitor connected (no luck.)
I have done a format and complete new installation of Windows Xp. Upon rebooting, the computer shows me the option on screen (F1)of going into BIOS setup.then shows me a blank screen with the message-Windows could not start because the following file is missing or corrupt.I removed that hard drive and tried another working hard drive with WinXp and same message came up. Problem the computer does not respond to my (PS2)keyboard input so that I can at least go into the bios setting. Bought a new Logitech USB keyboard but that too did'nt resolve the problem. Is there a way to update this bios as I noted a new update. Computer is a Compaq presario 1920nx.
i have windows xo sp3.i had avira antivir premium installed on my PC. then i installed mcafee 8.5i. i updated the same to the latest version but my windows security alert keeps on telling me that you have no antivirus installed on your pc.it doesnt detect it at all.then again i removed it and again installed avira but still the system is showing the same security alert.
i have a problem with my cd-rom, i asked a technician to re-format my laptop it is a acer aspire 3620. all other parts of the systems works normally but then my cd-rom is not functioning the comp cant read the cd-rom.. it does not even show on the computer system.
Although a systems check says my cd/dvd drive is installed and working fine, neither winamp or Sonic DigitalMedia LE detect a suitable drive when commanded to burn a disc.
I have windows xp installed in my pc,but for last 2 days my pc isn't detecting dvd drive in my computer but its there in bios setup.I tried all the techniques posted here but none of them worked..what i did,i installed xp in another drive and now its showing the dvd drive.So anyone could help me out to detect my dvd drive in the initial case.
i have 2 PCs in my home: PC1 and PC2 i run Windows XP SP2 on both PC1 is directly connected to the internet and is working fine
PC2 uses a TEW-424UB wireless USB network adapter. It was ok, but it stopped working. I tried unplugging-replugging, but Windows doesn't even detect the device any more when i plug it in NOTHING happens. And when i check for the device in Device Manager, there's a yellow icon and it tells me the device can't start.
My wireless connection says that it is connected to the network, but can't connect to the internet. Tried to repair through MSN and said that my default gateway is down or something of that nature.
I have a home network of three computers connected to a Linksys router which is connected to a cable modem to Road Runner. In one machine I am running W2K Professional with IIS 5.0. I am trying to build a web site consisting of a large number of web pages and associated .jpg, .gif and .mp3 files. The W2K Pro machine, which is running IIS 5.0, always creates a bugcheck error and reboots after I enter the URL to the web pages in questions. The requests are entered from a XP Pro machine on the local network. The W2K machine bugchecks and reboots whenever I kill a browser session and then restart it. The Event viewer in the W2K Pro machine shows an error message that says, "A duplicate name has been detected on the TCP network. The IP address of the machine that sent the message is in the data. Use the nbtstat -n " I cannot do any of this as the the machine bugchecks and reboots. All machines on the local network are configured for DHCP for compatability with Road Runner. My W2K Pro machine is current with SP4 plus updates. The machine I am using for the browser is XP Pro current to SP2 plus updates since.
I am getting the following error message:"Windows could not start because the following file is missing or corrupt: Isapnp.sys" error message at startup" I have tried to repair it by booting off the original XP setup CD but when the computer starts up the CD is not read and the error message pops up again. Any suugetstion?
My Problem: My modem can not be detected. I was attempting to load AOL 9.0 optimized on my laptop and it could not detect my modem. I tried using Windows' Modem and Internet Connection and could not Detect my modem. I installed the recommended driver from IBM and Lenovo from the MDCB3C2k, thinking my modem is a 3COM modem(I have no idea what kinda modem I have. Either 3COM or Xicro, I don't know how to tell), I installed the driver and it did nothing my modem is still undetected.note: I have used Belarc Advisor, and could not get a result for my Modem Model under Communication Devices.
recently someone installed windows xp sp2 on my laptop acer 5611 Awlmi it has built in cd/dvd rom now when i insert dvd or cd rom it is not opening files even i installed nero and it doesnt shows cd/dvd rom.when i go to device manager and check for cd/dvd rom devices there is something installed with name HL-DT-ST-DVDRAM GSA-T10N.when i open my computer it shows in devices with removable storage CD DRIVE (G and CD DRIVE )There is only one cd/dvd rom in my laptop.
This one has me baffled. My DVD/CD drive is no longer detected in the Bios of my Asus A8V Motherboard. I have it attached as the Primary Slave and the Bios says that it's not detected. It used to be, how else would I have installed XP. The drive works fine for burning Cd's and DVD's and shows up as working normally in Device Manager. Any thoughts?
I get an error on the boot and it tells me that the hard drive can't be detected. then just goes to a blinking curser on a blank black screen.I looked in the bios and read what other forums wrote and things seem to be set correctly.I did switch it to enable UEFI Boot and that just made it to where I can't get into the BIOS Settings now.I am running xp and am connected to a central server.I have only had the pc for a year with no major problems.I can't get a hold of my IT guy since it is the weekend.
OK I don't know where to start. When my system is rebooted I get a BSOD it goes through BIOS nothing is detected and it BSOD's. Now here is the strange part if I unplug it from power and try to boot again it comes up fine but if I try to shut it down BSOD WTF I have tried everything. BIOS has been re-flashed to latest version for my GA-7VAX MOBO and I have reloaded winXP.. I am at a complete loss as to why this is happening. Could it be my MOBO is going bad?
I work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
