In reinstalling XP SP2; Monitor works, but only in 680/460 resolution and it cannot be changed. Device manager shows no monitor or driver. The correct driver is Intel 82865G and I cannot find it anywhere in the old files. Can't download it from the Intel site either (problem #2!) Also, I tried shutting down and disconnecting the monitor then restarting with the monitor connected (no luck.)
View 3 RepliesI just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
View 2 Replies View RelatedWhen Windows adds a new monitor using the standard driver, can it detect the aspect ratio? When I hooked up mine, all the resolution choice were for 4:3 monitors. There were no widescreen options. It should choose the monitor's native resolution on its own if the monitor is an LCD.
View 2 Replies View RelatedI have a old Dell computer which I brought a 24" Dell HD monitor. I upgraded it with a new graphics card which has both VGA and HD capability hook-ups. Now we have a new tower to go with exisiting 24" monitor. My problem is I can not get a old standard VGA monitor to work with the old system listed above. When I plug in the the VGA monitor plug in the VGA outlet in the old computer I get no signal to the monitor. What do I need to do with drivers or other wise to get the old computer back to being able to be used with the old VGA monitor?
View 2 Replies View Relatedmy darn gateway monitor screen is too wide. How do i reduce it to the regular size? I pressed Ctrl and held down on the scroll lock and nothing happens. i tried to reset it with the monitor button but nothing happens.i can not view the right side graphic on my monitor
View 8 Replies View RelatedI replace my old LCD monitors (Dell 1905s) with new acer P223w's. I have a dual monitor display.I power off both monitors with one switch that cuts off the power. When I do this however, Windows makes the sound like a device has been disconnected and it messes up my monitor settings. This is very annoying and it didn't happen with my other monitors nor does it happen on my other Windows XP system with different monitors. It's like Windows is trying to be "smart" by thinking the monitor is gone. I do not want Windows to care if the monitor is powered off.
View 5 Replies View RelatedI wonder if it is possible to switch off the computer's monitor manually.
System Control / Energy provides the possibility to define how long the
computer must idle to disable the monitor. I want to do that "by hand". Is
that possible?
I was trying to make a movie in Windows Movie Maker. I wanted to save it to a CD but I got an error message. "A recordable CD was not detected. Would you like to save your movie to the hard drive. Yes or No. I have Window XP Media Center Edition 2005. I let someone I know look at my computer he said I needed to replace the drive so I let him. Unfortunately I am still receiving the same message. I hope you can help or lead me in the right direction.
View 6 Replies View Relatedi noticed this when trying to install an app, Ever Note. it refused to install, claiming i was not using windows xp.. what? i've got xp SP2, but even in firefox's about tab i'm a w98 user! when i tried to install WMP11, i was sent to the w98's download page, which was quite frustrating (WMP9!)
View 2 Replies View RelatedI have a HT ready processor, Mobo, and chipset. Yet I do not have it running on my system. I have dealt with the mobo support, and they say I need a fresh install of windows. I can't do that because it is pre installed software. Bios does not give me the option, but even if it did it is supposed to be enabled by default. Is there anything in windows that anyone knows of that I may have turned off, or a way to enable or access it through windows. I have XP pro SP2.
View 2 Replies View RelatedI'm running Windows XP on a stand-alone pc. I have Norton Internet Security/Anti-Virus installed. I have encountered a pop up window (which will not go away) with the message "New Network Detected". It wants me to select home, office, etc.I don't have any windows firewall enabled, but have Norton taking care of it instead.The consensus I'm getting is get rid of Norton, it stinks. But I would think there could be something simpler/makes more sense to do.
View 7 Replies View RelatedI have a friend who is having a problem with his laptop.I don't know what kind of laptop he has but the problem is his laptop cannot detect any cd/dvd rom drives. It will not detect the internal cd/dvd rom or an external dvd rom (connected thru usb2.0). It does however recognise the harddrive. He is using Windows 2000 OS. For obvious reasons he cannot put in the Win2000 CD and reinstall drivers (if that is what the problem is). So, does anyone know what could be wrong? I can get more information on the laptop if this would help.
View 12 Replies View RelatedHad my PC in Oct its a tiny by the way, since new it has had a fault when turned off ,but power still on at the mains, the phone rings the PC boots up, also lately is has been shutting down saying problem has been detected, and recovered from an error, i have restored it back to when it was working fine but still the same, tried to get hold of tiny but get a guy who i cant understand on the other end of line.
View 14 Replies View RelatedIve a disk of 80 GB storage.formatted and partitioned it into 3 partitions, one NTFS, where i installed XP, and the other two FAT32.no other OS installed. now the problem is , it wont boot properly. i mean it starts booting, and where the welcome screen is supposed to come, it goes black. anyway, i noted in partition magic's Check for errors, dat the third partition had a few bad blocks, and ran chkdsk to correct the errors. i thote dat wud solve the problem.but it didn't.so i formatted a second time the last partition only (to FAT32 again), and then it was listed in partition magic,but couldnt be accessed anywhere, in command prompt or windows explorer.
View 2 Replies View RelatedHelping a friend with his computer (Gateway w/XP Home SP2) and discovered his floppy drive does not detect the floppy disk when it is inserted. I was attempting to created Ghost images from the floppy and it would boot into the OS instead of the bootable floppy. Checked BIOS and boot sequence was correct (2nd boot device). Tried 3 different disks still no joy. Clicked on A:/ drive in Windows Explorer (with floppy disk inserted) and got "Device not accessible". Checked floppy drive properties in Device Manager and it says device is operating normally.
I have not yet opened the tower to check connections, but to date the tower has never been opened since the computer was purchased a couple of years ago. I do not know whether the floppy has ever been actually used. My friend doesn't remember ever using it.Checked the bootable floppy in my computer and it worked just fine.
I have done a format and complete new installation of Windows Xp. Upon rebooting, the computer shows me the option on screen (F1)of going into BIOS setup.then shows me a blank screen with the message-Windows could not start because the following file is missing or corrupt.I removed that hard drive and tried another working hard drive with WinXp and same message came up. Problem the computer does not respond to my (PS2)keyboard input so that I can at least go into the bios setting. Bought a new Logitech USB keyboard but that too did'nt resolve the problem. Is there a way to update this bios as I noted a new update. Computer is a Compaq presario 1920nx.
View 14 Replies View Relatedi have windows xo sp3.i had avira antivir premium installed on my PC. then i installed mcafee 8.5i. i updated the same to the latest version but my windows security alert keeps on telling me that you have no antivirus installed on your pc.it doesnt detect it at all.then again i removed it and again installed avira but still the system is showing the same security alert.
View 1 Replies View Relatedi have a problem with my cd-rom, i asked a technician to re-format my laptop it is a acer aspire 3620. all other parts of the systems works normally but then my cd-rom is not functioning the comp cant read the cd-rom.. it does not even show on the computer system.
View 1 Replies View RelatedAlthough a systems check says my cd/dvd drive is installed and working fine, neither winamp or Sonic DigitalMedia LE detect a suitable drive when commanded to burn a disc.
View 1 Replies View RelatedI have windows xp installed in my pc,but for last 2 days my pc isn't detecting dvd drive in my computer but its there in bios setup.I tried all the techniques posted here but none of them worked..what i did,i installed xp in another drive and now its showing the dvd drive.So anyone could help me out to detect my dvd drive in the initial case.
View 1 Replies View RelatedI've just tried to burn my cd as usual but now its just come up saying cd or dvd burner is not detected.
View 2 Replies View RelatedHaving a major problem with my PC locating my Pinoneer DVD drive & my Sony CD drive. When I go into my device manager, both drives have a yellow dot with an explantion point. When I try to enable them, I get a message saying windows has located the driver but the hardware is not working. When I look under My Computer, the drives are not even listed under Storage Devices. I've even atempted to do a system restore but not matter what restore point I go back to, Windows says it's unable to restore from that point, choose another. I am far from a PC guru and don't really understand much technical stuff. Can someone help me get up & running again?
View 12 Replies View Relatedi have 2 PCs in my home: PC1 and PC2 i run Windows XP SP2 on both PC1 is directly connected to the internet and is working fine
PC2 uses a TEW-424UB wireless USB network adapter. It was ok, but it stopped working. I tried unplugging-replugging, but Windows doesn't even detect the device any more when i plug it in NOTHING happens. And when i check for the device in Device Manager, there's a yellow icon and it tells me the device can't start.
My wireless connection says that it is connected to the network, but can't connect to the internet. Tried to repair through MSN and said that my default gateway is down or something of that nature.
View 1 Replies View RelatedI have a home network of three computers connected to a Linksys router which is connected to a cable modem to Road Runner. In one machine I am running W2K Professional with IIS 5.0. I am trying to build a web site consisting of a large number of web pages and associated .jpg, .gif and .mp3 files. The W2K Pro machine, which is running IIS 5.0, always creates a bugcheck error and reboots after I enter the URL to the web pages in questions. The requests are entered from a XP Pro machine on the local network. The W2K machine bugchecks and reboots whenever I kill a browser session and then restart it. The Event viewer in the W2K Pro machine shows an error message that says, "A duplicate name has been detected on the TCP network. The IP address of the machine that sent the message is in the data. Use the nbtstat -n " I cannot do any of this as the the machine bugchecks and reboots. All machines on the local network are configured for DHCP for compatability with Road Runner. My W2K Pro machine is current with SP4 plus updates. The machine I am using for the browser is XP Pro current to SP2 plus updates since.
I am getting the following error message:"Windows could not start because the following file is missing or corrupt: Isapnp.sys" error message at startup"
I have tried to repair it by booting off the original XP setup CD but when the computer starts up the CD is not read and the error message pops up again. Any suugetstion?
My Problem: My modem can not be detected. I was attempting to load AOL 9.0 optimized on my laptop and it could not detect my modem. I tried using Windows' Modem and Internet Connection and could not Detect my modem. I installed the recommended driver from IBM and Lenovo from the MDCB3C2k, thinking my modem is a 3COM modem(I have no idea what kinda modem I have. Either 3COM or Xicro, I don't know how to tell), I installed the driver and it did nothing my modem is still undetected.note: I have used Belarc Advisor, and could not get a result for my Modem Model under Communication Devices.
View 2 Replies View Relatedrecently someone installed windows xp sp2 on my laptop acer 5611 Awlmi it has built in cd/dvd rom now when i insert dvd or cd rom it is not opening files even i installed nero and it doesnt shows cd/dvd rom.when i go to device manager and check for cd/dvd rom devices there is something installed with name HL-DT-ST-DVDRAM GSA-T10N.when i open my computer it shows in devices with removable storage CD DRIVE (G and CD DRIVE )There is only one cd/dvd rom in my laptop.
View 9 Replies View RelatedThis one has me baffled. My DVD/CD drive is no longer detected in the Bios of my Asus A8V Motherboard. I have it attached as the Primary Slave and the Bios says that it's not detected. It used to be, how else would I have installed XP. The drive works fine for burning Cd's and DVD's and shows up as working normally in Device Manager. Any thoughts?
View 3 Replies View RelatedI have no sound drivers. I've tried searching for one but I can't find it.
View 13 Replies View RelatedI get an error on the boot and it tells me that the hard drive can't be detected. then just goes to a blinking curser on a blank black screen.I looked in the bios and read what other forums wrote and things seem to be set correctly.I did switch it to enable UEFI Boot and that just made it to where I can't get into the BIOS Settings now.I am running xp and am connected to a central server.I have only had the pc for a year with no major problems.I can't get a hold of my IT guy since it is the weekend.
View 6 Replies View Related