My grandads cd-rom drive and cdwr drive are missing. There not in my computer or the device manager. I do not know when these went missing because my grandad does not use the drives often. I can still open the cd-rom drive and I can hear it loading, but I cannot open the cdwr drive. I tried a system restore point but that had no effect. So what do I need to do to get the drives back.
View 8 RepliesMy computer is not recognizing my cd rom drives
View 2 Replies View Relatedi have a new dvd burner in F and a new cd/dvd rom in E but the computer doesn't show this in my computer.
View 2 Replies View Relatedjust recently i was doing my usual bit and both cd/dvd drives droped out, after vigorous testing i found cdrom.sys and its shared componants refused to mount the drives as the service could not start, so i tried updating the drivers - no drivers more suitable than the ones i already have, my oppinion is the files are corrupt but it seems pretty hard to find replacments without individually going through the entire .cab database on the x64 disk, this is something i wish to avoid just incase its not even the problem.
View 5 Replies View RelatedBoth the CD and DVD drives are missing from Windows Explorer (XPSP3). They do show up and are properly identifed in BIOS - They both have power and can open/close from the front buttons Swapping IDE Pri and Sec had no effect.
View 4 Replies View RelatedI have a Windows XP home setup on a pentium IV system. I have two hard disks partitioned to give 3 partitions on one and two on the other. Quite often when I start windows it appears to boot normally but in Explorer I can only see the home partition. Explorer runs very slowly and crashes. I've checked for viruses, run adaware and spybot but can't fix it. I have AVG and sygate personal fire wall running.
View 4 Replies View RelatedI have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies View RelatedI am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies View Relatedi reinstalled windows xp and now i have missing drivers and since i have no cd because i got pc from a friend and he went away i dont know what to do. in device manager under other devices Ethernet controller,multimedia audio controller, pc i simple communications controller, video controller and video controller (vga compatible) all show as yellow i'm using intel pentium 4 530. motherboard: Dell inc 0g5611 .can't get any info on drives because they show up as unknown. is there some way i can get the drives from somewhere?
View 3 Replies View RelatedI tried to burn some music the other day and for some reason those 2 drives were missing. i looked in the recycle bin and tried a bunch of stuff but couldnt get them back. does anyone know what i need to do to get them back?
View 1 Replies View RelatedI removed a CD/RW drive and replaced it with a DVD/RW drive. I now have 2 DVD/RW drives. They are NEC-3500 and NEC-3540. The NEC-3400 was in my system before and worked fine. I have tried the registry fix CDGONE, unintalling the IDE controllers, reinstalling the newest Gigabyte board drivers, and removing the high and low filters. None of it has worked. I still can't use either DVD/CD. I have nothing with an alert in the system devices. They are not showing there. Also I tried putting the CD/RW back in and the red light stays lit up as soon as I connect it. It will not recognize that either. Tried system restore to before the change and putting the DVD/RW, DVD player and CD/RW back in I had before and it failed the restore. I also tried re-storing the registry but system restore removed the save I had and it's gone. I also tried hooking up a brand new Seagate IDE 200 GB hard drive I bought for backups and it doesn't recognize it. I have add on SATA card which is where my main Hard drive was before this and it still boots up fine.I just cannot use any CD or DVD in my system which is a major problem. I had DVD easy creator and a DVD copy program, including a DVD for free. I removed them all incase it was causing a problem. Still nothing recognized. When the motherboard boots up it finds nothing under IDE then goes to my SATA board and boots up.The IDE controllers are turned on in BIOS and all IDE's are turned on for auto sense in the BIOS. I had not made any changes in the BIOS before or after this. I need someone with some ideas.
View 6 Replies View RelatedI connect to my network drive through a VPN. The problem comes when I restart my computer - the mapped drive is missing and I have to start all over again.
This same problem exists if I use another user account too. How can this be fixed.
When I boot my pc it freezes on the boot unless i press F10 and select my primary drive. If I press F2 to get into my bios it also freezes. Once I get into windows (booting slower then normal) I can not see my optical drives. The optical drives are showing in the device manager however.
View 3 Replies View RelatedWin XP SP2. DVD &CD drives missing from my computer and device manager. Showing in bios however. (yellow exclamation marks in device manager)I have tried numerous fixes for this problem but to no available.
View 4 Replies View RelatedI've had my computer since Christmas of last year. It's a pretty nice rig, lots of nice stuff in it. I'll start out with the first problem I've had with it. My DVD drive: it just disappears. I'll be running fine one minute, then the next my computer will freeze for a few seconds, then it's fine, then it'll freeze again, then it's fine. Then I take a look at my list of drives, and my DVD drive isn't on the list. I can still see my two hard drives, but not my DVD drive. This wasn't a HUGE issue to me; I figured I would just have to deal with not being able to install games or watch movies on my computer.So then, after trying to troubleshoot this issue for quite some time, I decide to completely power off my PC, including turning it off with the switch in the back. After waiting a few minutes, I flip the switch, and I hear the sound of something sparking and frying. "That's odd," I think to myself, but try to turn my computer on anyway. No response. I mash the power button but it just won't turn on. Turns out my power supply was fried. "Alright," I said. "I'll just go upgrade." But my dad disagreed and simply purchased one that was roughly equivalent to the one I currently had. Oh well, it's served me fine so far.
Recently, my problems have been getting worse. We tried reinstalling Windows, thinking that might fix the DVD drive. My dad hands me this "custom" CD with Windows and SP2 installed, and since he's likely to start screaming and spitting if I don't do his bidding, I installed with this CD. I am not sure if this was a mistake or not, but I'm thinking it was.Recently my computer has been locking and freezing at random intervals, usually while I'm playing World of Warcraft, though it also has happened at least twice while I'm just playing around on the computer, browsing the internet, ETC. The other day I was playing WoW and a bluescreen popped up. Here's the technical information, or whatever it is.
I'm pretty computer savvy, but I've always struggled to confugure this RAID motherboard, but I've never encountered an error like this. I formatted a 60Gb Maxtor D740X-6L IDE drive with NTFS through an external harddrive connected to a laptop. THe drive is now blank. I connected this as a master on Channel 3 IDE on my Abit KG7 RAID mother board. I also connected my CD Writer to IDE channel 2 as a master, with a copy of WIndows XP in it. (I connected it like this because it doesn't recognise my harddrive on Channel 1 or 2 on the first page.)
When I try to boot I get the following error: BOOTMGR is missing. The strange thing is, as it boots it lists all four drive channels, and only shows Primary Master: 6L060J3 (presumably IDE channel 1). It does not show my CD writer, and infact the drive is connected to IDE channel 3. As you can see in attached photo1........
3 times in last 3 weeks. Likely Software or Hardware Problem or ??XP SP!+++/80G West.Digital HD/512 RAM/P4(C: Drive)/Intel MB 865GBFL/3.0Ghz.AVG 7.5 AV & 7.5 AS, BoClean, AAW SE 1.06, Spybot 1.5_17 Beta, CCleaner. Sea Monkey exclusive browsing.Cable Modem & D-Link Router. More system info in Profile.ALL up to date, shows clear on all scans incl. AVG rootkit & Blacklight.Defragged, cleaned, running cool (temp). No unusual noises from box. 3 years old & used extensively. Updated to 550 watt dual fan PS(1/2Yr).
View 10 Replies View RelatedI have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies View RelatedI recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem.
- I've tried deleting the upper and lower filters but they are not in the selected registery.
- I've tried a system restore but i can't go back to a previous point before the registery fix install.
- I've tried unplugging the leads and restaring but this didn't help.
- I've tried microsoft guided help but it couldn't find the upper and lower filters.
- i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios.
I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies View RelatedI am using Windows XP Professional SP2 on an Asus A7N8X-E Deluxe MB. I have 5 internal HDD's and 2 external USB drives, I also have 2 DVD R/RW +- Dual Density drives, a Zip 250 and an Orb 2GB drive. So far this year I have had to reinstall my Windows like 8 times and done about 4 Windows repairs! Each time I seem to get 4 extra removable drives added to my system. In Disk Manager they are listed as "Generic STORAGE DEVICE USB Device", I have changed Device Usage to Do Not use this device (disable) and also I have uninstalled each device. Unfortunately, each time I restart the computer, they come back, shifting other drives to another drive letter.
View 5 Replies View RelatedI work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
View 1 Replies View RelatedAll my desktop icons are missing ,start menu missing, only thing i could see is wallpaper on desktop right click is laso not working,i could only use ctrl+ alt+del to open task mgr and run a program what should i do to take them back.
View 10 Replies View Relatedi turned on my pc i got the error XP Could not start, the following file is missing or corrupt:
I run Microsoft Windows home service pack 2Also, to complicate things, My computer is lacking a disk drive, so i only have access to USB ports.
I have a dual boot arrangement with 98SE and XP. In XP after switching on there is no sign of my DVD/CD-ROM drives in Windows explorer unles I go through the following sequence: Control Panel -> System -> Hardware -> Device Mngr -> IDE/ATA/ATAPI Controlers -> NVIDIA NFORCE MCP2 IDE Controller -> Right click , scan for Hardware Changes, then the DVD/CD-ROM drives appear and work perfectly
View 6 Replies View RelatedJust reformatted my winxp machine which has 3hd's.Unfortunately I am only seeing "C" drive What the hell has happened ?I partioned all three drives and reinstalled XP on C
View 8 Replies View RelatedMy D & E drive totally disappeared i am so confused where did they go and most impotantly how do i get it back
View 14 Replies View RelatedI'm curious as to whether there would be a " Tweak for cd rom drives " to load also and not just exect
View 9 Replies View RelatedMy PC is getting confused my A drive is the same, my C drive is OK but my D drive is now my E drive and my E drive has been given the letter F, how can I get them back to the way they should be
View 2 Replies View RelatedI understand that XP/sp3 does not need drivers for cd rom drives - nec/rw and sony However,xp does not recognise my cd rom drives
View 5 Replies View RelatedSince upgrading to XP Pro from W2K a few weeks back my CDR and DVD drives are no longer recognised. In device manager an exclamation shows and I've been unable to find either an XP or more up to date driver. The drives in question are the NEC NR-7800A and NEC DV-5800A (In a Dell Dimesion 4300 machine) Does anyone have any idea on how I might approach getting these drives operating again
View 15 Replies View Related