I connect to my network drive through a VPN. The problem comes when I restart my computer - the mapped drive is missing and I have to start all over again.
This same problem exists if I use another user account too. How can this be fixed.
I need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies View RelatedI have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies View RelatedFor some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 4 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedWe have a Windows 2003 server that contains files that need to be accessed by a collection of XP Pro clients. We initially set up mapped drives that connected these client computers to the server using a set of security credentials that matched user accounts on the server. These mapped drives "map" when the client logs into XP. Since the local login credentials on the client PCs don't match those on the server, we use "Connect using a different username" to use credentials residing in the Server userbase.
View 4 Replies View RelatedI have a XP Pro SP2 workstation that runs a login script that maps a few drives.When I look in my computer or in explorer they do no show up. If I go to disconnect a network drive they are all listed as connected. all shortcut's that use these mapped drives work.
View 5 Replies View RelatedI just changed my MoBo and then upgraded to Windows XP SP2. Everything is fine except My USB drives and Memory cards in the USB reader do not show up mapped in Explorer. They do show up in Computer Management. I can even assign drive letter there. But they will not show up in Eplorer even after I assign the drive letters.CD ROM and Hard disks all show up. Sandisk media player shows up too. But not USB drives. I have seen several threads with similar issues.
View 3 Replies View Relateda client of mine lost connection to her mapped drive and has no record of its path or fqdn. does windows keep a log of previously mapped drives? a history anywhere? or is there a way of finding out what drive or share she was mapping to so I can restore the mapping connection?
View 2 Replies View RelatedI have a Win2000 network and now have around 20 new XP Pro machines on it.Every user has at least one drive mapped to one of our servers to store files Every so often, for no reason that I have figured out, when trying to access a mapped drive it hangs up and you are asked for a username and password.This happens to me with my perminatly mapped drives and new ones I make on the fly. No username or password seems to work, and the easiest way to get it to work correctly is to reboot. This only happens with the XP machines.
View 6 Replies View RelatedI'm having the same issue at my work place that ScubaGirl had posted,so far four of our users have put in calls for it.ScubaGirl's post read: Clicking mapped /network drives opens minesweeper For some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 1 Replies View RelatedI work at a school district here in FL and we have come across a strange issue. When someone logs into windows, sometimes our kix script will not run and the network drives will not map no matter how many times we log off and log back in. The only solution we can find is disabling the IEEE 802.1x setting on the authentication tab of the local area connection. It doesn't seem to be happening with all of our systems and seems to be sporadic. As soon as we disable this setting and log back in the drives will map. Any idea why this is happening and anyone have a solution? Our PC's are running Windows XP Pro w/SP2 and our servers are Win 2k3.
View 5 Replies View RelatedFirst i want introduced to u.I am siva from gz.I have Windows XP Proffessional Desktop PC.I mapped some drives or folders.After i mapped that drive when i double click means.It will OPENDED WITH likes this.
View 3 Replies View RelatedI work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
View 1 Replies View RelatedIm having a challenge when Im trying to maaped a workstation to a server on active directory server 2008. THE NETWORK MAPPED COULD NOT BE CREATED BECAUSE THE FOLLOWING ERROR HAD OCCURED. AN EXTENDED ERROR HAS OCCURED.
View 2 Replies View Relatedhave a new installation of WinXP SP1. When i try to browse any folder, the explorer either hangs for a long time or crashes occasionally. This happens when my machine is connected to network. If my machine is off the network, it shows the folder contents immediately. I removed all the network shares connected to my machine and still the problem persists.
View 6 Replies View RelatedSimple two station network, both XP Pro Sp2 boxes. I've mapped a folder from PC2 so that it appears as Drive Z: on PC1. However, when I open My Computer on PC1 the Z: drive isn't in the list. Interestingly, if I open a DOS window on PC1 and change directories to the Z: drive, the mapped folder on PC2 is accessible. DIR /P for example displays the directory.Why isn't the Z: drive showing up in My Computer?
View 3 Replies View Relatedi reformated compaq laptop presario 700 have WAN network driver and bunch of aol stuff
Aol uninstall not in Add/Remove list shouldn't i be able to connect the cable modem here at work to this laptop i've been working on?i plug cable in and no connection to interenet.am i forgetting a basic thing to do?
This is my boss's daughter laptop that was Kazaa infected so i reformated.
I have several network drives. I am on a laptop and whenever I disconnect from my dock (wired connection)it automatically closes any open folders connected to a network drive.My wireless kicks in a few seconds later, and I have to go through the trouble reopening them all!Is there a registry setting I can set to prevent this?If I turn the PC on outside of work, it doesn't connect these drives, and thus will prevent them from showing even when I go in and connect to the network. I have to connect them MANUALLY every time.
View 6 Replies View RelatedMy computer is not recognizing my cd rom drives
View 2 Replies View RelatedMy grandads cd-rom drive and cdwr drive are missing. There not in my computer or the device manager. I do not know when these went missing because my grandad does not use the drives often. I can still open the cd-rom drive and I can hear it loading, but I cannot open the cdwr drive. I tried a system restore point but that had no effect. So what do I need to do to get the drives back.
View 8 Replies View Relatedi have a new dvd burner in F and a new cd/dvd rom in E but the computer doesn't show this in my computer.
View 2 Replies View Relatedjust recently i was doing my usual bit and both cd/dvd drives droped out, after vigorous testing i found cdrom.sys and its shared componants refused to mount the drives as the service could not start, so i tried updating the drivers - no drivers more suitable than the ones i already have, my oppinion is the files are corrupt but it seems pretty hard to find replacments without individually going through the entire .cab database on the x64 disk, this is something i wish to avoid just incase its not even the problem.
View 5 Replies View RelatedBoth the CD and DVD drives are missing from Windows Explorer (XPSP3). They do show up and are properly identifed in BIOS - They both have power and can open/close from the front buttons Swapping IDE Pri and Sec had no effect.
View 4 Replies View RelatedI have a Windows XP home setup on a pentium IV system. I have two hard disks partitioned to give 3 partitions on one and two on the other. Quite often when I start windows it appears to boot normally but in Explorer I can only see the home partition. Explorer runs very slowly and crashes. I've checked for viruses, run adaware and spybot but can't fix it. I have AVG and sygate personal fire wall running.
View 4 Replies View RelatedI have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies View RelatedI am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies View Relatedi reinstalled windows xp and now i have missing drivers and since i have no cd because i got pc from a friend and he went away i dont know what to do. in device manager under other devices Ethernet controller,multimedia audio controller, pc i simple communications controller, video controller and video controller (vga compatible) all show as yellow i'm using intel pentium 4 530. motherboard: Dell inc 0g5611 .can't get any info on drives because they show up as unknown. is there some way i can get the drives from somewhere?
View 3 Replies View RelatedI tried to burn some music the other day and for some reason those 2 drives were missing. i looked in the recycle bin and tried a bunch of stuff but couldnt get them back. does anyone know what i need to do to get them back?
View 1 Replies View RelatedI removed a CD/RW drive and replaced it with a DVD/RW drive. I now have 2 DVD/RW drives. They are NEC-3500 and NEC-3540. The NEC-3400 was in my system before and worked fine. I have tried the registry fix CDGONE, unintalling the IDE controllers, reinstalling the newest Gigabyte board drivers, and removing the high and low filters. None of it has worked. I still can't use either DVD/CD. I have nothing with an alert in the system devices. They are not showing there. Also I tried putting the CD/RW back in and the red light stays lit up as soon as I connect it. It will not recognize that either. Tried system restore to before the change and putting the DVD/RW, DVD player and CD/RW back in I had before and it failed the restore. I also tried re-storing the registry but system restore removed the save I had and it's gone. I also tried hooking up a brand new Seagate IDE 200 GB hard drive I bought for backups and it doesn't recognize it. I have add on SATA card which is where my main Hard drive was before this and it still boots up fine.I just cannot use any CD or DVD in my system which is a major problem. I had DVD easy creator and a DVD copy program, including a DVD for free. I removed them all incase it was causing a problem. Still nothing recognized. When the motherboard boots up it finds nothing under IDE then goes to my SATA board and boots up.The IDE controllers are turned on in BIOS and all IDE's are turned on for auto sense in the BIOS. I had not made any changes in the BIOS before or after this. I need someone with some ideas.
View 6 Replies View RelatedWhen I boot my pc it freezes on the boot unless i press F10 and select my primary drive. If I press F2 to get into my bios it also freezes. Once I get into windows (booting slower then normal) I can not see my optical drives. The optical drives are showing in the device manager however.
View 3 Replies View Related