SP2 USB Drives Wont Mapped In Explorer?
Aug 28, 2007
I just changed my MoBo and then upgraded to Windows XP SP2. Everything is fine except My USB drives and Memory cards in the USB reader do not show up mapped in Explorer. They do show up in Computer Management. I can even assign drive letter there. But they will not show up in Eplorer even after I assign the drive letters.CD ROM and Hard disks all show up. Sandisk media player shows up too. But not USB drives. I have seen several threads with similar issues.
View 3 Replies
ADVERTISEMENT
May 17, 2006
I have a XP Pro SP2 workstation that runs a login script that maps a few drives.When I look in my computer or in explorer they do no show up. If I go to disconnect a network drive they are all listed as connected. all shortcut's that use these mapped drives work.
View 5 Replies
View Related
Apr 20, 2006
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies
View Related
Apr 23, 2007
We have a Windows 2003 server that contains files that need to be accessed by a collection of XP Pro clients. We initially set up mapped drives that connected these client computers to the server using a set of security credentials that matched user accounts on the server. These mapped drives "map" when the client logs into XP. Since the local login credentials on the client PCs don't match those on the server, we use "Connect using a different username" to use credentials residing in the Server userbase.
View 4 Replies
View Related
Aug 29, 2007
a client of mine lost connection to her mapped drive and has no record of its path or fqdn. does windows keep a log of previously mapped drives? a history anywhere? or is there a way of finding out what drive or share she was mapping to so I can restore the mapping connection?
View 2 Replies
View Related
Mar 12, 2008
I connect to my network drive through a VPN. The problem comes when I restart my computer - the mapped drive is missing and I have to start all over again.
This same problem exists if I use another user account too. How can this be fixed.
View 2 Replies
View Related
Jul 22, 2005
I have a Win2000 network and now have around 20 new XP Pro machines on it.Every user has at least one drive mapped to one of our servers to store files Every so often, for no reason that I have figured out, when trying to access a mapped drive it hangs up and you are asked for a username and password.This happens to me with my perminatly mapped drives and new ones I make on the fly. No username or password seems to work, and the easiest way to get it to work correctly is to reboot. This only happens with the XP machines.
View 6 Replies
View Related
Jan 30, 2009
For some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 4 Replies
View Related
Sep 23, 2009
I'm having the same issue at my work place that ScubaGirl had posted,so far four of our users have put in calls for it.ScubaGirl's post read: Clicking mapped /network drives opens minesweeper For some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 1 Replies
View Related
Jun 6, 2005
I work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
View 1 Replies
View Related
Aug 3, 2005
My office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies
View Related
Oct 13, 2009
I need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies
View Related
Jan 23, 2007
A laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
View 5 Replies
View Related
Dec 29, 2008
I once got my drives separated in my "Workstation" explorer window but I installed another drive and the separation disapeared... how to get it back?
If it's not clear, here is a little representation of what it should looks like...
HDD1 - Name1 HDD2 - Name2
-------------Separation-------------------
USB device1 USB device2
USB device3 USB device4
--------------Separation------------------
Other device1 Other device2
View 6 Replies
View Related
Jan 31, 2009
I understand that if I remove a USB drive without going through the process of using the "Safely Remove" icon I run the risk of getting a 'phantom' drive listed in Explorer. I have found this out the hard way! I have several partitions on the main drive and also other external hard drives - in getting these 'phantom' drives the drive letters somehow got reassigned without my intervention so now cause a problem accessing from my network. All my efforts to remove the entries have failed - I have tried through Device Manager but cannot figure out which entry would apply to the ones I have. I have one from a U3 drive which uses 2 drive letters and another single one. If I click on the "Safely Remove" icon I can get them to disappear until I reboot. I tried using those 'phantom' letters for other drives - again all goes well until I reboot and I am back to square one. I have searched the registry for the entries that set the drives but cannot figure that out either. Various trial deletions have no effect.
View 10 Replies
View Related
Sep 12, 2006
ROXIO version of GOBACK being the cause of the problem. when I had to do a reinstall of windows and noticed that Windows Explorer wasn't showing my second and third drives.I know and very easily fixable by going into Disk Management. drives were showing in Disk Management, there was no letter assigned to them.
View 2 Replies
View Related
Mar 23, 2007
My girlfriend's computer displays Removable Drives G:, H:, I:, J:, K:. There are no removable drives on this system except when we download pictures from the digital camera. Then we get an additional Removable Drive L:. Any idea what is causing this
View 2 Replies
View Related
Dec 27, 2007
I recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem.
- I've tried deleting the upper and lower filters but they are not in the selected registery.
- I've tried a system restore but i can't go back to a previous point before the registery fix install.
- I've tried unplugging the leads and restaring but this didn't help.
- I've tried microsoft guided help but it couldn't find the upper and lower filters.
- i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios.
I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
View 14 Replies
View Related
Jun 26, 2010
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies
View Related
Sep 13, 2007
I work at a school district here in FL and we have come across a strange issue. When someone logs into windows, sometimes our kix script will not run and the network drives will not map no matter how many times we log off and log back in. The only solution we can find is disabling the IEEE 802.1x setting on the authentication tab of the local area connection. It doesn't seem to be happening with all of our systems and seems to be sporadic. As soon as we disable this setting and log back in the drives will map. Any idea why this is happening and anyone have a solution? Our PC's are running Windows XP Pro w/SP2 and our servers are Win 2k3.
View 5 Replies
View Related
May 8, 2010
I installed XP on my new Acer Aspire Revo 3600 (Managed to finally get HDMI sound working okay, etc, etc, but that's another story.It came pre-installed with a Linux distribution, which didn't even get past the boot screen, and up until recently the wireless keyboard supplied was working fine (plug and play I'm assuming).Then starting yesterday whenever I pressed any given key on the keyboard, it would come up with another character (not the one I pressed). Note that some keys are still mapped correctly, but for example the "I" key will come up as if I pressed "7", and "P" will end up with "9", etc. It's as if it thinks the right had side of my alphabetical QWERTY keys are the number pad.Note that this same issue also first happened in the Linpus Linux command prompt when I first received my Revo, but that didn't matter because I put XP on since.
View 3 Replies
View Related
Feb 28, 2008
Every now and then when i try to run a program that is on one of my mapped drives a window pops up saying the mapped drive doesn't exist. I go into my computer and sure enough all my mapped drives show disconnected but when I try to open them they open just fine and I can see all the files on the mapped drive. What would cause this?
View 9 Replies
View Related
Oct 27, 2006
I have a mapped drive and whenever I try to connect it keeps asking for my user name and password. Using tweak ui I have set my auto logon to the same information that I enter when it asks me for the user name and password.
View 1 Replies
View Related
Jan 26, 2007
I can't disconnect some drives that are mapped on a WinXP Pro workstation. I wanted to remove the drive mapping names as they were badly outdated and so deleted the registry key. where the entries were found and then rebooted.Now the connections show up as "Disconnected Network Drive" but all still work. However, I can't disconnect any of them and the "Disconnected Network Drive" will not update to the name of the machine/share even when I go into the share and use it. Really, this is a test machine because I wanted to apply a reg via policyto clear out the strings on logon/logoff so that these were fixed all over the company. I don't understand why this thing is misbehaving though, the key get's recreated and has the name of one machine, but not the others.
View 2 Replies
View Related
Apr 11, 2007
Every time I turn my computer on I have to re-enter my username and password to connect to a mapped network drive. The drive is on a server running 2003 at work.The server has the permissions set up to allow me to connect with my server account, but I have XP home on my machine. Is there any way to keep me from having to enter my username and password every day?
View 3 Replies
View Related
Apr 1, 2010
An XP Pro SP3 workstation has a mapped drive (f which the workstation does not currently acknowledge as a mapped drive. If I issue a net use command the list reports 2 other properly networked drives, but not the F: drive. However, the F: is available in My Computer and is accessable. The user can run the server based app and make changes all day, but the next day all her changes are gone. To test, from her computer I created a new folder on the f: drive (\serverapps)and copied files into this new folder on the server. No other networked user can see the new folder. Then when I reboot her computer, the new folder is gone on her mapped drive. All other users are using the same mapped drive without issue. Does Windows cache mapped drive activity? I can not recreate the mapped drive because Windows doesn't acknowledge that it exists, but also reports that F: is not available. I can remap the connect using an alternate drive letter and it works properly. Is there a way to reset whatever part of Windows controls drive mapping?
View 3 Replies
View Related
Sep 6, 2005
I cant find any information on how to to do this but I really thought it was possible. I want to place a link on my EUs desktop to a shared folder on a server. I though it was possible through group policy but I cant seem to figure out where the setting is. So, is it possible to do this through a GPO or any other way to do it without going through all the EU PCs and doing it manually.
View 1 Replies
View Related
Jul 31, 2007
I have accidentally deleted a folder in my H drive which is mapped to a folder on the server.unfortunately, I dont have a backup of it where do things that we delete go - as I cant find it in my recycle bin.I have also checked the recyble bin of the server but cant find it?
View 3 Replies
View Related
Aug 30, 2007
Simple two station network, both XP Pro Sp2 boxes. I've mapped a folder from PC2 so that it appears as Drive Z: on PC1. However, when I open My Computer on PC1 the Z: drive isn't in the list. Interestingly, if I open a DOS window on PC1 and change directories to the Z: drive, the mapped folder on PC2 is accessible. DIR /P for example displays the directory.Why isn't the Z: drive showing up in My Computer?
View 3 Replies
View Related
Mar 4, 2007
I have a brand new install of XP Professional on a Dell with a 3.2Ghz CPU, with 1.5Gig of RAM in it. I setup a mapped drive to my file server from this XP workstation (all this is runing on my home network). As soon as I access this share and start to drill down through its folders, the CPU jumps to near 100%, rendering it useless. The task manager shows explorer.exe and system as being the two biggest resources of the CPU. If I close the share, the CPU doesn't let go. However, if I click on "disconnect" on that network drive, it lets go and returns to normal.I have disabled my anti virus and firewall to rule that out, but it keeps happening anyways. usually I just reboot to get back the CPU, but as I said above, last time I tried just disconnecting from the mapped drive, and that worked. What could be the issue? I never had any issues on my Windows 2000 machine accessing this same share, what could be XP's problem? I spent hours setting this machine up, but I am about ready to go back to 2000.
View 8 Replies
View Related
Jun 27, 2008
First i want introduced to u.I am siva from gz.I have Windows XP Proffessional Desktop PC.I mapped some drives or folders.After i mapped that drive when i double click means.It will OPENDED WITH likes this.
View 3 Replies
View Related
