Every time I turn my computer on I have to re-enter my username and password to connect to a mapped network drive. The drive is on a server running 2003 at work.The server has the permissions set up to allow me to connect with my server account, but I have XP home on my machine. Is there any way to keep me from having to enter my username and password every day?
View 3 RepliesI have a mapped drive and whenever I try to connect it keeps asking for my user name and password. Using tweak ui I have set my auto logon to the same information that I enter when it asks me for the user name and password.
View 1 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedA laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
Every now and then when i try to run a program that is on one of my mapped drives a window pops up saying the mapped drive doesn't exist. I go into my computer and sure enough all my mapped drives show disconnected but when I try to open them they open just fine and I can see all the files on the mapped drive. What would cause this?
View 9 Replies View RelatedI can't disconnect some drives that are mapped on a WinXP Pro workstation. I wanted to remove the drive mapping names as they were badly outdated and so deleted the registry key. where the entries were found and then rebooted.Now the connections show up as "Disconnected Network Drive" but all still work. However, I can't disconnect any of them and the "Disconnected Network Drive" will not update to the name of the machine/share even when I go into the share and use it. Really, this is a test machine because I wanted to apply a reg via policyto clear out the strings on logon/logoff so that these were fixed all over the company. I don't understand why this thing is misbehaving though, the key get's recreated and has the name of one machine, but not the others.
View 2 Replies View RelatedAn XP Pro SP3 workstation has a mapped drive (f which the workstation does not currently acknowledge as a mapped drive. If I issue a net use command the list reports 2 other properly networked drives, but not the F: drive. However, the F: is available in My Computer and is accessable. The user can run the server based app and make changes all day, but the next day all her changes are gone. To test, from her computer I created a new folder on the f: drive (\serverapps)and copied files into this new folder on the server. No other networked user can see the new folder. Then when I reboot her computer, the new folder is gone on her mapped drive. All other users are using the same mapped drive without issue. Does Windows cache mapped drive activity? I can not recreate the mapped drive because Windows doesn't acknowledge that it exists, but also reports that F: is not available. I can remap the connect using an alternate drive letter and it works properly. Is there a way to reset whatever part of Windows controls drive mapping?
View 3 Replies View RelatedI cant find any information on how to to do this but I really thought it was possible. I want to place a link on my EUs desktop to a shared folder on a server. I though it was possible through group policy but I cant seem to figure out where the setting is. So, is it possible to do this through a GPO or any other way to do it without going through all the EU PCs and doing it manually.
View 1 Replies View RelatedI have accidentally deleted a folder in my H drive which is mapped to a folder on the server.unfortunately, I dont have a backup of it where do things that we delete go - as I cant find it in my recycle bin.I have also checked the recyble bin of the server but cant find it?
View 3 Replies View RelatedSimple two station network, both XP Pro Sp2 boxes. I've mapped a folder from PC2 so that it appears as Drive Z: on PC1. However, when I open My Computer on PC1 the Z: drive isn't in the list. Interestingly, if I open a DOS window on PC1 and change directories to the Z: drive, the mapped folder on PC2 is accessible. DIR /P for example displays the directory.Why isn't the Z: drive showing up in My Computer?
View 3 Replies View RelatedI have a brand new install of XP Professional on a Dell with a 3.2Ghz CPU, with 1.5Gig of RAM in it. I setup a mapped drive to my file server from this XP workstation (all this is runing on my home network). As soon as I access this share and start to drill down through its folders, the CPU jumps to near 100%, rendering it useless. The task manager shows explorer.exe and system as being the two biggest resources of the CPU. If I close the share, the CPU doesn't let go. However, if I click on "disconnect" on that network drive, it lets go and returns to normal.I have disabled my anti virus and firewall to rule that out, but it keeps happening anyways. usually I just reboot to get back the CPU, but as I said above, last time I tried just disconnecting from the mapped drive, and that worked. What could be the issue? I never had any issues on my Windows 2000 machine accessing this same share, what could be XP's problem? I spent hours setting this machine up, but I am about ready to go back to 2000.
View 8 Replies View RelatedFirst i want introduced to u.I am siva from gz.I have Windows XP Proffessional Desktop PC.I mapped some drives or folders.After i mapped that drive when i double click means.It will OPENDED WITH likes this.
View 3 Replies View Relatedi have a modem mapped to drive D. How can i know this information from registry?
View 1 Replies View RelatedI have two computers on my LAN. I have a folder on one of the PCs(D:MP3s) that has about 40GB of music, etc. I shared this folder and on the other PC, I mapped a drive pointed at that folder.The problem is, some of the folders and files are not visible when I explore the mapped drive. For instance D: ockrian wilsonsmile appears on the first PC, but when I look in Z: ock (on the mapped drive on the second PC) the Brian Wilson folder is not present.I estimate the mapped drive only "sees" about half of what I have. Don't know what to make of it, really.
View 1 Replies View RelatedI wrk for a company that has a server with Windows 2003. There are multiple 2000 and XP users who map drives from the server. Now here is where the problem begins. 2000 has no problms at all mapping drives. XP however has an issue with one folder. No matter what letter you pick, when you map the drive you get an error message "Setup requires a different version of windows. Check to make sure you are running setup on the Windows platform for which it is intended. Error 102" First of all im not running any type of setup. Im merely mapping a drive. This error occurs regardless of what drive letter you pick. And the really weird part, is once mapped the drive will open in Explorer or any other mode EXCEPT through My Computer and double clicking on the drive. If you right click the drive and hit open or explore, both will open the drive just fine. You double click and you get the error. When you right click the drive you also get an "autoplay" feature which makes no sense being its a folder on the server.
It acts like it has lost its association. Like if a JPG file is associated with nothing it wont open, but if you tell it to open with paint then it will. Its really weird and after weeks of searching i have found not a single similar problem to this one i can relate or get help from. It just plain makes no sense. I am going to unshare and reshare the folder when everyone leaves and see if that helps, but it works fine in 2000 currently and not in XP just in my computer.
I am using an xp machine for my server with mapped drives to the wwwroot on it. Several times, especially today, I will drop the mapped drive connection, and I am unable to remote desktop to the machine. When I switch my monitor over to the machine, the default screen saver is up.I have had to reboot the machine the last couple of times to get reconnected.
System Been working okay, but when you log off the floppy drive would run for a second or two but now it runs for around 10 seconds. Is this a concern or not
View 4 Replies View RelatedI have installed XP last time i have changed some startup registry entries.when i start it. It comes to the welcome screen and show my desktop wallpaper and suddenly loggin off ...i tried both users of my computer but same issu.... last good config. login also not works. but now i cant even loggin in safe mode. i tried some forums but no tricks worked...i boot from xp cd and changed ntuser.dat to wsaupdater.dat ....but till i cant login...I think if i can able to change that registry startup value somehow then it is possible...but i dont know how can i change those value.
View 2 Replies View Relatedmy Pc is starting up then when i enter my password, it logs on then logs off it's because an option then i have put without thinking in ad-aware anniversary edition, the option that tells what processes are allowed to run on the computer, is there a way to enter my PC ? i have tried running in safe mode, it's still no good
View 2 Replies View RelatedI've recently installed Sony Sound Forge 8 which, as part of the installation, creates an ASP.NET user.Since this user was created, I have to click on my User Account to log in (it's the only one thatg shows on the welcome screen, the ASP one is hidden) How do I get it back to logging me in automatically - there's no password on the account.
where if i log off an account and try to log in again, there is a 1 min "Loading account settings" (i've checked it and its loading WgaLogon.dll...) and then there is an endless? (i've only been patient enough to leave it for 15 minutes) screen showing the desktop image.I can open the Task Administer and see there are some processes working (scvhost.exe mainly). I notice this not in the cpu-usage column, but on the memory-usage column, where these processes change the used memory (not in great numbers, though) Fast user switching works fine if i dont sign off of any account (I currently have only two).
View 10 Replies View RelatedI work at a school district here in FL and we have come across a strange issue. When someone logs into windows, sometimes our kix script will not run and the network drives will not map no matter how many times we log off and log back in. The only solution we can find is disabling the IEEE 802.1x setting on the authentication tab of the local area connection. It doesn't seem to be happening with all of our systems and seems to be sporadic. As soon as we disable this setting and log back in the drives will map. Any idea why this is happening and anyone have a solution? Our PC's are running Windows XP Pro w/SP2 and our servers are Win 2k3.
View 5 Replies View RelatedI installed XP on my new Acer Aspire Revo 3600 (Managed to finally get HDMI sound working okay, etc, etc, but that's another story.It came pre-installed with a Linux distribution, which didn't even get past the boot screen, and up until recently the wireless keyboard supplied was working fine (plug and play I'm assuming).Then starting yesterday whenever I pressed any given key on the keyboard, it would come up with another character (not the one I pressed). Note that some keys are still mapped correctly, but for example the "I" key will come up as if I pressed "7", and "P" will end up with "9", etc. It's as if it thinks the right had side of my alphabetical QWERTY keys are the number pad.Note that this same issue also first happened in the Linpus Linux command prompt when I first received my Revo, but that didn't matter because I put XP on since.
View 3 Replies View RelatedWe have a Windows 2003 server that contains files that need to be accessed by a collection of XP Pro clients. We initially set up mapped drives that connected these client computers to the server using a set of security credentials that matched user accounts on the server. These mapped drives "map" when the client logs into XP. Since the local login credentials on the client PCs don't match those on the server, we use "Connect using a different username" to use credentials residing in the Server userbase.
View 4 Replies View RelatedI have a XP Pro SP2 workstation that runs a login script that maps a few drives.When I look in my computer or in explorer they do no show up. If I go to disconnect a network drive they are all listed as connected. all shortcut's that use these mapped drives work.
View 5 Replies View RelatedI just changed my MoBo and then upgraded to Windows XP SP2. Everything is fine except My USB drives and Memory cards in the USB reader do not show up mapped in Explorer. They do show up in Computer Management. I can even assign drive letter there. But they will not show up in Eplorer even after I assign the drive letters.CD ROM and Hard disks all show up. Sandisk media player shows up too. But not USB drives. I have seen several threads with similar issues.
View 3 Replies View Relateda client of mine lost connection to her mapped drive and has no record of its path or fqdn. does windows keep a log of previously mapped drives? a history anywhere? or is there a way of finding out what drive or share she was mapping to so I can restore the mapping connection?
View 2 Replies View RelatedI connect to my network drive through a VPN. The problem comes when I restart my computer - the mapped drive is missing and I have to start all over again.
This same problem exists if I use another user account too. How can this be fixed.
Im having a challenge when Im trying to maaped a workstation to a server on active directory server 2008. THE NETWORK MAPPED COULD NOT BE CREATED BECAUSE THE FOLLOWING ERROR HAD OCCURED. AN EXTENDED ERROR HAS OCCURED.
View 2 Replies View RelatedI have a Win2000 network and now have around 20 new XP Pro machines on it.Every user has at least one drive mapped to one of our servers to store files Every so often, for no reason that I have figured out, when trying to access a mapped drive it hangs up and you are asked for a username and password.This happens to me with my perminatly mapped drives and new ones I make on the fly. No username or password seems to work, and the easiest way to get it to work correctly is to reboot. This only happens with the XP machines.
View 6 Replies View RelatedFor some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 4 Replies View Related