Mapped External Drive / Some Folders Not Visible?
Jul 19, 2005
I have two computers on my LAN. I have a folder on one of the PCs(D:MP3s) that has about 40GB of music, etc. I shared this folder and on the other PC, I mapped a drive pointed at that folder.The problem is, some of the folders and files are not visible when I explore the mapped drive. For instance D: ockrian wilsonsmile appears on the first PC, but when I look in Z: ock (on the mapped drive on the second PC) the Brian Wilson folder is not present.I estimate the mapped drive only "sees" about half of what I have. Don't know what to make of it, really.
View 1 Replies
ADVERTISEMENT
Feb 10, 2010
I have a file folder that is 247 MB on XP that I'm trying to copy to my external Passport Hard drive. I've been able to copy all files to the external except this one, but every time I try it elicits an Error Copying File or Folder ie. "Cannot Copy File". What's up with that?
View 1 Replies
View Related
Aug 3, 2005
My office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies
View Related
Jan 23, 2007
A laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
View 5 Replies
View Related
Jan 7, 2007
quality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies
View Related
Feb 9, 2005
I am experiencing this problem with my CD-R/W driver. I have windows XP and 2000 both installed on my system. The CD Drive is visible from windows 2000, but when i go to windows XP, i dont see the CD Drive there in My Computer. It used to be there earlier, but then it disappeared. Normally when some bad CD is inserted, it disappears ,but it appears again on restart. Now its not appearing altogether !!! I know that its driver is the cause. Will I need to download a driver for it ? What might be the reason? Howcome it is functioning okay in Windows 2000?
View 3 Replies
View Related
May 15, 2005
I looked through the add and remove program box ,and i found this one program AdWARE & SPYware. How would i be able to get rid of this program ?. I've already downloaded an Anti-virus protector called Kaspersky Anti-virus Personal pro 5.0. I've already scanned my computer and it found 2 viruses. I don't know if this program i am using to scan my computer for viruses works or not. I've never heard of the program, but it's been recommended by many.
View 1 Replies
View Related
Feb 28, 2008
Every now and then when i try to run a program that is on one of my mapped drives a window pops up saying the mapped drive doesn't exist. I go into my computer and sure enough all my mapped drives show disconnected but when I try to open them they open just fine and I can see all the files on the mapped drive. What would cause this?
View 9 Replies
View Related
Oct 27, 2006
I have a mapped drive and whenever I try to connect it keeps asking for my user name and password. Using tweak ui I have set my auto logon to the same information that I enter when it asks me for the user name and password.
View 1 Replies
View Related
Jan 26, 2007
I can't disconnect some drives that are mapped on a WinXP Pro workstation. I wanted to remove the drive mapping names as they were badly outdated and so deleted the registry key. where the entries were found and then rebooted.Now the connections show up as "Disconnected Network Drive" but all still work. However, I can't disconnect any of them and the "Disconnected Network Drive" will not update to the name of the machine/share even when I go into the share and use it. Really, this is a test machine because I wanted to apply a reg via policyto clear out the strings on logon/logoff so that these were fixed all over the company. I don't understand why this thing is misbehaving though, the key get's recreated and has the name of one machine, but not the others.
View 2 Replies
View Related
Apr 11, 2007
Every time I turn my computer on I have to re-enter my username and password to connect to a mapped network drive. The drive is on a server running 2003 at work.The server has the permissions set up to allow me to connect with my server account, but I have XP home on my machine. Is there any way to keep me from having to enter my username and password every day?
View 3 Replies
View Related
Apr 1, 2010
An XP Pro SP3 workstation has a mapped drive (f which the workstation does not currently acknowledge as a mapped drive. If I issue a net use command the list reports 2 other properly networked drives, but not the F: drive. However, the F: is available in My Computer and is accessable. The user can run the server based app and make changes all day, but the next day all her changes are gone. To test, from her computer I created a new folder on the f: drive (\serverapps)and copied files into this new folder on the server. No other networked user can see the new folder. Then when I reboot her computer, the new folder is gone on her mapped drive. All other users are using the same mapped drive without issue. Does Windows cache mapped drive activity? I can not recreate the mapped drive because Windows doesn't acknowledge that it exists, but also reports that F: is not available. I can remap the connect using an alternate drive letter and it works properly. Is there a way to reset whatever part of Windows controls drive mapping?
View 3 Replies
View Related
Sep 6, 2005
I cant find any information on how to to do this but I really thought it was possible. I want to place a link on my EUs desktop to a shared folder on a server. I though it was possible through group policy but I cant seem to figure out where the setting is. So, is it possible to do this through a GPO or any other way to do it without going through all the EU PCs and doing it manually.
View 1 Replies
View Related
Jul 31, 2007
I have accidentally deleted a folder in my H drive which is mapped to a folder on the server.unfortunately, I dont have a backup of it where do things that we delete go - as I cant find it in my recycle bin.I have also checked the recyble bin of the server but cant find it?
View 3 Replies
View Related
Aug 30, 2007
Simple two station network, both XP Pro Sp2 boxes. I've mapped a folder from PC2 so that it appears as Drive Z: on PC1. However, when I open My Computer on PC1 the Z: drive isn't in the list. Interestingly, if I open a DOS window on PC1 and change directories to the Z: drive, the mapped folder on PC2 is accessible. DIR /P for example displays the directory.Why isn't the Z: drive showing up in My Computer?
View 3 Replies
View Related
Mar 4, 2007
I have a brand new install of XP Professional on a Dell with a 3.2Ghz CPU, with 1.5Gig of RAM in it. I setup a mapped drive to my file server from this XP workstation (all this is runing on my home network). As soon as I access this share and start to drill down through its folders, the CPU jumps to near 100%, rendering it useless. The task manager shows explorer.exe and system as being the two biggest resources of the CPU. If I close the share, the CPU doesn't let go. However, if I click on "disconnect" on that network drive, it lets go and returns to normal.I have disabled my anti virus and firewall to rule that out, but it keeps happening anyways. usually I just reboot to get back the CPU, but as I said above, last time I tried just disconnecting from the mapped drive, and that worked. What could be the issue? I never had any issues on my Windows 2000 machine accessing this same share, what could be XP's problem? I spent hours setting this machine up, but I am about ready to go back to 2000.
View 8 Replies
View Related
Jun 27, 2008
First i want introduced to u.I am siva from gz.I have Windows XP Proffessional Desktop PC.I mapped some drives or folders.After i mapped that drive when i double click means.It will OPENDED WITH likes this.
View 3 Replies
View Related
Mar 25, 2010
i have a modem mapped to drive D. How can i know this information from registry?
View 1 Replies
View Related
Jul 5, 2005
I wrk for a company that has a server with Windows 2003. There are multiple 2000 and XP users who map drives from the server. Now here is where the problem begins. 2000 has no problms at all mapping drives. XP however has an issue with one folder. No matter what letter you pick, when you map the drive you get an error message "Setup requires a different version of windows. Check to make sure you are running setup on the Windows platform for which it is intended. Error 102" First of all im not running any type of setup. Im merely mapping a drive. This error occurs regardless of what drive letter you pick. And the really weird part, is once mapped the drive will open in Explorer or any other mode EXCEPT through My Computer and double clicking on the drive. If you right click the drive and hit open or explore, both will open the drive just fine. You double click and you get the error. When you right click the drive you also get an "autoplay" feature which makes no sense being its a folder on the server.
It acts like it has lost its association. Like if a JPG file is associated with nothing it wont open, but if you tell it to open with paint then it will. Its really weird and after weeks of searching i have found not a single similar problem to this one i can relate or get help from. It just plain makes no sense. I am going to unshare and reshare the folder when everyone leaves and see if that helps, but it works fine in 2000 currently and not in XP just in my computer.
View 2 Replies
View Related
May 18, 2010
I am using an xp machine for my server with mapped drives to the wwwroot on it. Several times, especially today, I will drop the mapped drive connection, and I am unable to remote desktop to the machine. When I switch my monitor over to the machine, the default screen saver is up.I have had to reboot the machine the last couple of times to get reconnected.
View 5 Replies
View Related
Jun 29, 2005
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies
View Related
Sep 29, 2007
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies
View Related
Oct 22, 2006
i connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies
View Related
May 17, 2007
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies
View Related
Feb 23, 2009
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
View 2 Replies
View Related
Mar 16, 2005
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
View 4 Replies
View Related
Apr 2, 2009
My sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
View 3 Replies
View Related
Aug 13, 2005
XPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
View 2 Replies
View Related
Mar 23, 2008
If you get another hard drive cause yours is almost full and there fore messing with the virtual.memory. If you get an external harddrive is it better to move the pagefile to the new hard drive which is what I was going to do change the drive for the virtual memory, then I got thinking, in case you didn't use the external drive all the time hooked up for whatever reason they you wouldn't have a pagefile on the old one does that make sense? I thought maybe it would be better just to move a bunch of pics and music to the extenal drive and leave the virtual memory (pagefile) where it is on the old drive, or would it make any difference??
View 4 Replies
View Related
Sep 6, 2008
i have WD elements 160gb external drive, when i connect it to my desktop it say new hardware found and asks to install software for it but when i ask XP to install software automatically then it says no driver found.
the drive is plug and play so i don't have any software for it nor it is listed anywhere in the WD website.
However the drives is functioning properly in my laptop and on my freind's desktop as well....so seems like my drive's alrite.I can easily use 4gb pen drive and 30gb ipod on my desktop but not my external drive.
View 14 Replies
View Related
Apr 14, 2008
My daughter's HP dv2000t notebook computer had a motherboard crash, apparently (won't turn on). I took the hard drive out and put it into a NexStar-3 USB drive enclosure to try to salvage the iTunes and documents. The folders all show up, but when I try to access her user directory, it says that it is "empty". The properties for the hard drive also say that it the drive is almost full, so the data is all there...somewhere.Is there some kind of security that is tying the user directory to my daughter's computer and dissallowing me to tread her files on another computer? I can see how this would be a good feature if it was stolen, but when I send it back to HP for repairs, they say that they will restore the hard drive to its original condition and wipe out her investment in music, etc.
View 7 Replies
View Related
