I tried to burn some music the other day and for some reason those 2 drives were missing. i looked in the recycle bin and tried a bunch of stuff but couldnt get them back. does anyone know what i need to do to get them back?
View 1 Replies
Win XP SP2. DVD &CD drives missing from my computer and device manager. Showing in bios however. (yellow exclamation marks in device manager)I have tried numerous fixes for this problem but to no available.
View 4 Replies View Related3 times in last 3 weeks. Likely Software or Hardware Problem or ??XP SP!+++/80G West.Digital HD/512 RAM/P4(C: Drive)/Intel MB 865GBFL/3.0Ghz.AVG 7.5 AV & 7.5 AS, BoClean, AAW SE 1.06, Spybot 1.5_17 Beta, CCleaner. Sea Monkey exclusive browsing.Cable Modem & D-Link Router. More system info in Profile.ALL up to date, shows clear on all scans incl. AVG rootkit & Blacklight.Defragged, cleaned, running cool (temp). No unusual noises from box. 3 years old & used extensively. Updated to 550 watt dual fan PS(1/2Yr).
View 10 Replies View RelatedMy computer is not recognizing my cd rom drives
View 2 Replies View RelatedMy grandads cd-rom drive and cdwr drive are missing. There not in my computer or the device manager. I do not know when these went missing because my grandad does not use the drives often. I can still open the cd-rom drive and I can hear it loading, but I cannot open the cdwr drive. I tried a system restore point but that had no effect. So what do I need to do to get the drives back.
View 8 Replies View Relatedi have a new dvd burner in F and a new cd/dvd rom in E but the computer doesn't show this in my computer.
View 2 Replies View Relatedjust recently i was doing my usual bit and both cd/dvd drives droped out, after vigorous testing i found cdrom.sys and its shared componants refused to mount the drives as the service could not start, so i tried updating the drivers - no drivers more suitable than the ones i already have, my oppinion is the files are corrupt but it seems pretty hard to find replacments without individually going through the entire .cab database on the x64 disk, this is something i wish to avoid just incase its not even the problem.
View 5 Replies View RelatedBoth the CD and DVD drives are missing from Windows Explorer (XPSP3). They do show up and are properly identifed in BIOS - They both have power and can open/close from the front buttons Swapping IDE Pri and Sec had no effect.
View 4 Replies View RelatedI have a Windows XP home setup on a pentium IV system. I have two hard disks partitioned to give 3 partitions on one and two on the other. Quite often when I start windows it appears to boot normally but in Explorer I can only see the home partition. Explorer runs very slowly and crashes. I've checked for viruses, run adaware and spybot but can't fix it. I have AVG and sygate personal fire wall running.
View 4 Replies View RelatedI have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies View RelatedI am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies View Relatedi reinstalled windows xp and now i have missing drivers and since i have no cd because i got pc from a friend and he went away i dont know what to do. in device manager under other devices Ethernet controller,multimedia audio controller, pc i simple communications controller, video controller and video controller (vga compatible) all show as yellow i'm using intel pentium 4 530. motherboard: Dell inc 0g5611 .can't get any info on drives because they show up as unknown. is there some way i can get the drives from somewhere?
View 3 Replies View RelatedI removed a CD/RW drive and replaced it with a DVD/RW drive. I now have 2 DVD/RW drives. They are NEC-3500 and NEC-3540. The NEC-3400 was in my system before and worked fine. I have tried the registry fix CDGONE, unintalling the IDE controllers, reinstalling the newest Gigabyte board drivers, and removing the high and low filters. None of it has worked. I still can't use either DVD/CD. I have nothing with an alert in the system devices. They are not showing there. Also I tried putting the CD/RW back in and the red light stays lit up as soon as I connect it. It will not recognize that either. Tried system restore to before the change and putting the DVD/RW, DVD player and CD/RW back in I had before and it failed the restore. I also tried re-storing the registry but system restore removed the save I had and it's gone. I also tried hooking up a brand new Seagate IDE 200 GB hard drive I bought for backups and it doesn't recognize it. I have add on SATA card which is where my main Hard drive was before this and it still boots up fine.I just cannot use any CD or DVD in my system which is a major problem. I had DVD easy creator and a DVD copy program, including a DVD for free. I removed them all incase it was causing a problem. Still nothing recognized. When the motherboard boots up it finds nothing under IDE then goes to my SATA board and boots up.The IDE controllers are turned on in BIOS and all IDE's are turned on for auto sense in the BIOS. I had not made any changes in the BIOS before or after this. I need someone with some ideas.
View 6 Replies View RelatedI connect to my network drive through a VPN. The problem comes when I restart my computer - the mapped drive is missing and I have to start all over again.
This same problem exists if I use another user account too. How can this be fixed.
When I boot my pc it freezes on the boot unless i press F10 and select my primary drive. If I press F2 to get into my bios it also freezes. Once I get into windows (booting slower then normal) I can not see my optical drives. The optical drives are showing in the device manager however.
View 3 Replies View RelatedI've had my computer since Christmas of last year. It's a pretty nice rig, lots of nice stuff in it. I'll start out with the first problem I've had with it. My DVD drive: it just disappears. I'll be running fine one minute, then the next my computer will freeze for a few seconds, then it's fine, then it'll freeze again, then it's fine. Then I take a look at my list of drives, and my DVD drive isn't on the list. I can still see my two hard drives, but not my DVD drive. This wasn't a HUGE issue to me; I figured I would just have to deal with not being able to install games or watch movies on my computer.So then, after trying to troubleshoot this issue for quite some time, I decide to completely power off my PC, including turning it off with the switch in the back. After waiting a few minutes, I flip the switch, and I hear the sound of something sparking and frying. "That's odd," I think to myself, but try to turn my computer on anyway. No response. I mash the power button but it just won't turn on. Turns out my power supply was fried. "Alright," I said. "I'll just go upgrade." But my dad disagreed and simply purchased one that was roughly equivalent to the one I currently had. Oh well, it's served me fine so far.
Recently, my problems have been getting worse. We tried reinstalling Windows, thinking that might fix the DVD drive. My dad hands me this "custom" CD with Windows and SP2 installed, and since he's likely to start screaming and spitting if I don't do his bidding, I installed with this CD. I am not sure if this was a mistake or not, but I'm thinking it was.Recently my computer has been locking and freezing at random intervals, usually while I'm playing World of Warcraft, though it also has happened at least twice while I'm just playing around on the computer, browsing the internet, ETC. The other day I was playing WoW and a bluescreen popped up. Here's the technical information, or whatever it is.
I'm pretty computer savvy, but I've always struggled to confugure this RAID motherboard, but I've never encountered an error like this. I formatted a 60Gb Maxtor D740X-6L IDE drive with NTFS through an external harddrive connected to a laptop. THe drive is now blank. I connected this as a master on Channel 3 IDE on my Abit KG7 RAID mother board. I also connected my CD Writer to IDE channel 2 as a master, with a copy of WIndows XP in it. (I connected it like this because it doesn't recognise my harddrive on Channel 1 or 2 on the first page.)
When I try to boot I get the following error: BOOTMGR is missing. The strange thing is, as it boots it lists all four drive channels, and only shows Primary Master: 6L060J3 (presumably IDE channel 1). It does not show my CD writer, and infact the drive is connected to IDE channel 3. As you can see in attached photo1........
I have a problem. Suddenly and for no apparent reason, my DVD burner (D drive) and CD burner (E drive) do not show up in my computer any more. I looked in device manager and they both show up but have yellow triangles with black exclamation points next to them. The message for them is something to the effect of the drivers are installed but it cannot locate the hardware. I have not tampered with them. The only thing I did was attempt to install Simple Backup and there was an error so it rolled back and uninstalled itself. After that was when I noticed the drives don't show up anymore. I have XP home on a compaq presario computer. DVD burner is HP dvd writer 300i and CD burner is a LiteOn something or other.
View 7 Replies View RelatedJust discovered that along with Local Disk "C", DVD-RW "D" and "CD" E drive. I now have 4 new "Removable" drives FGHI. Dont know where they came from, but every time I start or re-start my PC the "SafelyRemove Hardware" icon appears in the right bottom of my screen. Cant get rid of it, and where did these removable drives come from???
View 4 Replies View RelatedI'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
View 3 Replies View RelatedJust recently I haven't gotten my computer to recognize any of the CD's I am putting into either drive (a DVD R/RW drive or my CD-RW drive). Not only does nothing happen when I put in any CD (I have tried many), but also when I open up My Computer I don't see any drives listed under "Devices with Removable Storage" besides my 3 1/2 Floppy (A drive. What can I do to make my drives work again? I did build my computer, but everything has been working smoothly until this.
View 1 Replies View RelatedOver the weekend while doing some electrical work, I shut off the power to the room containing my computer. I had a hard time getting it to Start Up, but all seemed fine accept I had to re-set the clock. Then I shortly discovered that it would not recognize either D: or E: drive, I finally did get them both to recognize an audio cd but only after opening them through WMP. Usually they start when placed in the drive, and it will use my default player (Nero). When I looked in "My Computer" it prompts me to insert a disk ?? I am running Windows 2000 NT Pro and the C: drive seems to be operating fine.
View 14 Replies View RelatedI installed XP into my computer. I didn't mean to, but while I was installing xp i set it to have 2 drives on my computer. Local Disk C - 60gb Local Disk C - 60gb. My computer comes with 120 gb in total. How do I take my C:// and combine it with my D:// so I only have one local disk drive with 120gb in it?
View 8 Replies View RelatedMy Computer just shows flashlight. I have made it worse by trying to fix it. Control panel has stopped working also. I had added MSN Toolbar and may have crashed it. I need to find a way to fix this without losing data. Can not backup because it won't find other drives. Computer is working.
View 6 Replies View RelatedI have 3 drives C: D: and E:. I want to get rid of the E: drive how do I do that? Also my computer is old in computer terms about 5 or 6 how can I speed it up without paying money? My C: drive always seems to be low disk space. I don't download anything to that drive. One last thing I have msn dial up 56k, but when I sign on Ionly get a 44k and sometimes a 41k or 42k. What can I do about that without going cable modem?
View 4 Replies View RelatedCan you have more than one copy of XP on the same computer with two hard drives, that can be validated please.
View 14 Replies View RelatedI have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
View 10 Replies View RelatedI was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
View 11 Replies View RelatedI have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
I recently upgraded my operating system to 'Windows XP Professional' and I am happy with the outcome, with one exception.Since upgrading I am unable to easily access the 'my computer' facility.The symptoms are as follows. I double click the 'my computer' icon and the window opens, however, no drive details appear and I see the 'waggling torch' symbol which indicates that the computer is looking for the drives. Unfortunately this continues for some time ( often up to 5 minutes, and sometimes it will not find the drives at all
View 7 Replies View RelatedI recently setup my new computer and during the XP setup I thought I had partitioned my Hard drive so I had 3 of them,I did two 100gb and the 3rd with the remaining. In my computer it shows my main one C:/ and the other D:/.as well, nothing.Its just there, properties says 0 bytes.How can I get the most out of my hard drive, and get the other partitions running? I want to be able to store all of my music on one, and files on the other and have the 3rd for misc files.
View 12 Replies View Related
