Computer Not Recognizing D & E Drives
Dec 13, 2004
Over the weekend while doing some electrical work, I shut off the power to the room containing my computer. I had a hard time getting it to Start Up, but all seemed fine accept I had to re-set the clock. Then I shortly discovered that it would not recognize either D: or E: drive, I finally did get them both to recognize an audio cd but only after opening them through WMP. Usually they start when placed in the drive, and it will use my default player (Nero). When I looked in "My Computer" it prompts me to insert a disk ?? I am running Windows 2000 NT Pro and the C: drive seems to be operating fine.
View 14 Replies
ADVERTISEMENT
Jan 12, 2006
Just recently I haven't gotten my computer to recognize any of the CD's I am putting into either drive (a DVD R/RW drive or my CD-RW drive). Not only does nothing happen when I put in any CD (I have tried many), but also when I open up My Computer I don't see any drives listed under "Devices with Removable Storage" besides my 3 1/2 Floppy (A drive. What can I do to make my drives work again? I did build my computer, but everything has been working smoothly until this.
View 1 Replies
View Related
Apr 21, 2005
I have a Samsung SATA hard drive, a Sony CRX225 CD-RW and a Plextor PX-708A DVD-RW. I hadn't used the burners for a while, now they aren't working (can read from them but most of the time won't write). In the device managerdriveproperties, Win XP sees them all as SCSI devices. How is this possible? The BIOS has them as IDE primary and secondary drives, so where does the SCSI come in? Could this be part of the burning problem I am having?
View 3 Replies
View Related
Dec 13, 2006
I've installed two new disc drives, both Sony DRU 820A into my tower. XP doesn't recognize them.
View 12 Replies
View Related
Aug 23, 2005
I have a Western Digital 20 GB secondary internal hard disk as E:. It has been working fine for the last two years. Recently, while trying to access this disk, Windows displays message, "The disk in this drive is not formatted. Do you want to format it now?" When I insert a CD into the D: it spins for ~5-10 secs but then shows nothing in the right pane of Windows Explorer. Does not even give me the usual prompt to, "Please insert a disk into drive D:". It doesn't hang Windows Explorer, just sits there with D: actually selected in left pane. This is particularly odd as normally one would get the "insert disk" prompt. To test for drive readability, I successfully *booted* from the Windows XP installation CD-ROM. It read the CD fine so not a defective or broken CD-ROM. This also rules out that maybe the CD I inserted was bad or had
scratches.
When I insert either om my two SanDisk USB 512MB flash, Windows Explorer "assigns" it a drive letter but does not show it as formatted, ie- "The disk in this drive is not formatted. Do you want to format it now?" Even if I do select to format the drive, the format process fails. This drive has beeen tested on two other WinXP installtions and works fine......
View 3 Replies
View Related
Jan 2, 2006
i have unsuccessfully tried to install a maxtor and a western digital external hard drive. in both cases, i tried both usb 2.0 and firewire. both ports are good. the new hardware "wizard" cant install the new hardware because it cannot find the drivers. i thought xp had all the drivers. the really annoying part is that my kids p.o.s. off-the-shelf emachine recognized and installed both drives! i am currently running peripherals on both usb and firewire with no problems.
View 2 Replies
View Related
Aug 15, 2010
I'm pretty computer savvy, but I've always struggled to confugure this RAID motherboard, but I've never encountered an error like this. I formatted a 60Gb Maxtor D740X-6L IDE drive with NTFS through an external harddrive connected to a laptop. THe drive is now blank. I connected this as a master on Channel 3 IDE on my Abit KG7 RAID mother board. I also connected my CD Writer to IDE channel 2 as a master, with a copy of WIndows XP in it. (I connected it like this because it doesn't recognise my harddrive on Channel 1 or 2 on the first page.)
When I try to boot I get the following error: BOOTMGR is missing. The strange thing is, as it boots it lists all four drive channels, and only shows Primary Master: 6L060J3 (presumably IDE channel 1). It does not show my CD writer, and infact the drive is connected to IDE channel 3. As you can see in attached photo1........
View 4 Replies
View Related
Sep 2, 2005
Used to use Barts PE on a Windows XP system that had IDE drives. Created a new one since I was getting an error on my new Dell System with Windows XP PRO. Said it could not find a certain .in file. So I created a new Barts PE using a Windows XP Pro CD with SP1 and a blank CD to write the ISO image. After rebooting with Barts PE CD with ISO image, it looked fine and booted okay into Barts PE---BUT---it could not see my hard drives.
View 5 Replies
View Related
Feb 23, 2006
I have a Gateway GT5032, Athlon X2 4200+ w/ 1GB RAM, 80GB (system) & 250GB HDs running WinXP MCE 2005. I was using the PC to open Nero VisionExpress while I was opening an edited DVR-MS (~1GB) movie when the movie became very choppy till it froze (Nero took a while to load as well). After waiting several minutes I end tasked the movie and continued to have a slow response time from the PC. It returned to normal speed, then I would try opening the movie (using Windows Media Player) and the movie was still choppy till it stalled. I eventually restarted the PC...I noticed that it took a LONG time to boot WinXP and would ''stall'' every 5 seconds for about 2 seconds. During bootup it reported that an error was in C:Windowssystem32Rasapi32.dll, but it did boot into Windows and all.
I rebooted in hopes of fixing the problem, but then the PC had trouble recognizing drives. After being shut off for about 10 minutes, the BIOS recognizes all drives again but reports an MBR error on boot up and will not even load Windows. I'm assuming that MBR is the Master Boot Record...and that scares me a lot. I am wandering if there is any easy way to repair this problem. And also if the MBR is indeed damaged, could it also have harmed my other files on the HD (such as Rasapi32.dll)? What is the function of Rasapi32.dll. I don't suspect a virus as I was not running any suspicious files lately.
View 6 Replies
View Related
May 27, 2005
my keyboard and mouse cut out and yes they are both plugged in. they are stock so i believe they are p/s 2. uhm a the moment my keyboard is working but my mouse is not. sometimes my keyboard will also cut out but by restarting i can get it working again.
View 3 Replies
View Related
Jul 9, 2008
I just installed Windows XP Pro SP2 on my laptop and I think that it isn't recognizing my wireless card. Its in-built into the laptop, but I'm looking at my device manager and its not seeing a wireless adapter.I need to upgrade to a newer version of Windows.
View 1 Replies
View Related
Feb 28, 2006
My DSL is connected but my computer stops recognizing it whenever it feels like it. There are no errors and nothing happens to indicate that it just stopped recognizing it, but when I click a link or Internet Explorer it gives me the "Can not connect to this page" or send me to my ISP's modem page, which shows that I'm connected. I've been on the phone with Bellsouth and they say that it's not them. I've also still had this problem even though I disconnected all Firewall and Norton Internet Security for a few days.
View 7 Replies
View Related
Sep 24, 2005
I tried to burn some music the other day and for some reason those 2 drives were missing. i looked in the recycle bin and tried a bunch of stuff but couldnt get them back. does anyone know what i need to do to get them back?
View 1 Replies
View Related
Nov 13, 2005
I have a problem. Suddenly and for no apparent reason, my DVD burner (D drive) and CD burner (E drive) do not show up in my computer any more. I looked in device manager and they both show up but have yellow triangles with black exclamation points next to them. The message for them is something to the effect of the drivers are installed but it cannot locate the hardware. I have not tampered with them. The only thing I did was attempt to install Simple Backup and there was an error so it rolled back and uninstalled itself. After that was when I noticed the drives don't show up anymore. I have XP home on a compaq presario computer. DVD burner is HP dvd writer 300i and CD burner is a LiteOn something or other.
View 7 Replies
View Related
Sep 14, 2005
Just discovered that along with Local Disk "C", DVD-RW "D" and "CD" E drive. I now have 4 new "Removable" drives FGHI. Dont know where they came from, but every time I start or re-start my PC the "SafelyRemove Hardware" icon appears in the right bottom of my screen. Cant get rid of it, and where did these removable drives come from???
View 4 Replies
View Related
Jan 18, 2007
I'm in the process of building a new computer to replace my old AMD 2800+ system. I would like to use one of my old hard drives that has all my files and programs on it without having to do a complete reformate and fresh install of winxp. Is this possible? and how do I go about doing this?
View 3 Replies
View Related
May 5, 2006
I installed XP into my computer. I didn't mean to, but while I was installing xp i set it to have 2 drives on my computer. Local Disk C - 60gb Local Disk C - 60gb. My computer comes with 120 gb in total. How do I take my C:// and combine it with my D:// so I only have one local disk drive with 120gb in it?
View 8 Replies
View Related
Jul 12, 2005
My Computer just shows flashlight. I have made it worse by trying to fix it. Control panel has stopped working also. I had added MSN Toolbar and may have crashed it. I need to find a way to fix this without losing data. Can not backup because it won't find other drives. Computer is working.
View 6 Replies
View Related
Sep 3, 2005
I have 3 drives C: D: and E:. I want to get rid of the E: drive how do I do that? Also my computer is old in computer terms about 5 or 6 how can I speed it up without paying money? My C: drive always seems to be low disk space. I don't download anything to that drive. One last thing I have msn dial up 56k, but when I sign on Ionly get a 44k and sometimes a 41k or 42k. What can I do about that without going cable modem?
View 4 Replies
View Related
Mar 29, 2007
Can you have more than one copy of XP on the same computer with two hard drives, that can be validated please.
View 14 Replies
View Related
Sep 23, 2006
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
View 10 Replies
View Related
Dec 5, 2006
I was hit by a virus and now I can't access my hard drives from My Computer. I get a message "Windows Script Host" and "cannot find script file, "C:autorun.vbs" when I click on my "C" icon. Right clicking gives me gibberish in the menu box where the "Open" should be. I can still get through to the contents via My Documents and up-leveling.
View 11 Replies
View Related
Dec 4, 2005
I have an HP Pavillion zv5000.Windows xp sp2.I was online and the laptop and got a blue screen of death
don't recall exactly what it said, something about ie encountering an error and needing to shut down.Went to reboot, and it tried to boot off of LAN.checked my BIOS everything seemed fine, disabled that boot option.
Tried to reboot again, got a plashing flat cursor in upper left hand corner.Tried to use Norton Disk, scanned memory only.Did not scan boot.Tried to use XP disk to repair, and it came up with screen saying that
it could not find any hard drives on this computer.What happened to me, is it viral, or hardware.This laptop is only a year old, but no longer under warranty.
View 12 Replies
View Related
Jun 5, 2007
I recently upgraded my operating system to 'Windows XP Professional' and I am happy with the outcome, with one exception.Since upgrading I am unable to easily access the 'my computer' facility.The symptoms are as follows. I double click the 'my computer' icon and the window opens, however, no drive details appear and I see the 'waggling torch' symbol which indicates that the computer is looking for the drives. Unfortunately this continues for some time ( often up to 5 minutes, and sometimes it will not find the drives at all
View 7 Replies
View Related
May 2, 2007
I recently setup my new computer and during the XP setup I thought I had partitioned my Hard drive so I had 3 of them,I did two 100gb and the 3rd with the remaining. In my computer it shows my main one C:/ and the other D:/.as well, nothing.Its just there, properties says 0 bytes.How can I get the most out of my hard drive, and get the other partitions running? I want to be able to store all of my music on one, and files on the other and have the 3rd for misc files.
View 12 Replies
View Related
May 10, 2008
Have posted a few times here regarding this week-long attempt to get my machine back in operation. In a nutshell, had XP for 6 years with no major problems. Recently (in one session) updated monitor, added wireless keyboard/mouse, added memory, added USB 2.0 card and external drive, then updated to SP2, downloaded McAfee antivirus. Have not been able to keep machine running two days in a row since then. Each time did clean reinstall of XP with complete reformat of drive, this past time I only downloaded SP2, which was the only time it was connected to the net. Errors have popped up "files in registry had to be recovered by use of log, successful". Could not successfully install a video capture card which I had used in this system for years (drivers would not install from the cd). Could not successfully install drivers.
View 11 Replies
View Related
Apr 20, 2006
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies
View Related
Oct 13, 2008
Win XP SP2. DVD &CD drives missing from my computer and device manager. Showing in bios however. (yellow exclamation marks in device manager)I have tried numerous fixes for this problem but to no available.
View 4 Replies
View Related
Jul 25, 2009
everytime i plug in a usb/external hardrive, it isnt recognized in my computer, its not too do with any hardware, im 100% its a software issue, and i was running a program and it seemed to do something nothing comes up in my computer but you hear the connected sound, ive tried assignign a manual drive letter but it comes up with an error. and seeing as i cant back anything up because nothings regonized
View 14 Replies
View Related
Jun 5, 2006
How do I install 2 hard drives from seperate computers into 1 computer? I have tried the plug and play routine without success. Both hard drives have the XP OS on them and they work in their respective chassis. I know that one will have to be the master and the other the slave but I am not sure how to set everything up. Additionally, their are many programs and drivers on the prospective slave that need to be accessible.
View 1 Replies
View Related
May 19, 2008
I just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
View 16 Replies
View Related
