when I open explorer there's no more CD or DVD drives shown anymore (and I've got one CD burner and one DVD ROM internally and one DVD Burner externally). This means I can't watch any more DVDs on my PC or burn any more discs.
View 7 RepliesA Dell Dimensions 2400 with Pentium 4, 256MB memory and a 80GB hard drive. He is running windows xp home edition. We opened up the tower to clean out all the dust using air cans. We were very careful not to touch any wiring or connections to the CD roms or hard drive. We were ready to install 256MB chip more of memory to make it 512MB. However he purchased the wrong chip so we did not install it. I did remove the memory stick it had to show him what to purchase. I then made sure we reinstalled it back properly and tightly. We also installed tune up 2006 and Norton system works to clean out his system. I had tested the cd roms and they seemed to be working. Then my nephew tried to install his I-pod software and the program did not open itself. He then went to my computer to open the software manually and realized that the d:/drive and the e:/drives were not showing. I tried updating the drivers with no luck. My next step was to delete the cd rom's in device manager and reboot the sysytem. The system recognized the hardware and installed the drivers but the cd roms still do not appear in My Computer. Any suggestions would be greatly appreciated. BTW I also tried to do a system restore to an earlier date but windows xp could not restore to an earlier date.
View 15 Replies View RelatedThis afternoon I was at a friend's house and we installed CCleaner. After installing it, we went through the startup list and removed alot of stuff, and unfortunately removed two entries...one referencing DLA and the mentioned DVD.Now trying to access the DVD and CD-RW drives and it acts like a disk is not inserted. Went into Device Manager and both listed correctly with no problems. Made several attempts to uninstall them and reinstall them but still no luck.
View 13 Replies View RelatedDoes anybody know why these have disappeared from my screen and can no longer be found in My Computer? How do I get them back?
View 6 Replies View RelatedI have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies View RelatedI recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem.
- I've tried deleting the upper and lower filters but they are not in the selected registery.
- I've tried a system restore but i can't go back to a previous point before the registery fix install.
- I've tried unplugging the leads and restaring but this didn't help.
- I've tried microsoft guided help but it couldn't find the upper and lower filters.
- i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios.
I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies View RelatedI am using Windows XP Professional SP2 on an Asus A7N8X-E Deluxe MB. I have 5 internal HDD's and 2 external USB drives, I also have 2 DVD R/RW +- Dual Density drives, a Zip 250 and an Orb 2GB drive. So far this year I have had to reinstall my Windows like 8 times and done about 4 Windows repairs! Each time I seem to get 4 extra removable drives added to my system. In Disk Manager they are listed as "Generic STORAGE DEVICE USB Device", I have changed Device Usage to Do Not use this device (disable) and also I have uninstalled each device. Unfortunately, each time I restart the computer, they come back, shifting other drives to another drive letter.
View 5 Replies View RelatedI work for a fire department and they have Desktop Authority map certain network drives when they login. For some reason, DTA will map the drives when they login, and everything works fine, but after an hour or two, they lose connectivity to that drive and are no longer able to access it. I know this is very vague, but has anyone had this problem?BTW, I just recently upgraded from NT 4.0 to Server 2003 Standard, and we've had tons of other little problems with permissions and the like. Is this the cause of the dissapearing drives?
View 1 Replies View RelatedThis is not a hardware problem as it just seems to have happened to both my home and work pc's. The exact same issue, the F5 key no longer "refreshes". The only thing I can think of that has been installed recently on both PC's is XP SP3.
View 6 Replies View RelatedI am working on Windows XP Pro and just noticed that RUN is no longer under PROGRAMS. I have looked everywhere but it has just disappeared. I need to load an update and the only way I can do it is to type something in RUN.
View 5 Replies View Relatedi had been helped over in the security forum with some issues with my PC which have now been resolved thanks to Cybertech. Had asked him if he had any idea which OS would be better for my PC.My ISP which is AT&T no longer supports my OS which is 98SE.Without upgrading to another OS I cannot get any updates for the spyware or others they offer.We only have one PC presently and think that may be all we will have.We surf the net, the kids come over and play some games but that is really it nothing too intense.
View 14 Replies View RelatedI used Mozilla as my browser until I upgraded to Windows xp a few days ago. I can no longer use Mozilla because all the icons are gone and there are strange, overlapping words for what used to be the menu bar. When I click on one, such as "bookmarks," I get nothing but a solid black box open on my screen. I am okay with using Internet Explorer, but I would like to be able to import my bookmarks from Mozilla.
View 10 Replies View Relatedwhen I try to end them it takes an inordinately long time. Like two or more minutes. I bring up Task Manager, highlight the "not running " program and click "end task" which brings up another box that says "end program". But when I click this box nothing happens for at least a couple of minutes, quite often longer. I can repeat this process over and over and it makes no difference.
View 14 Replies View RelatedBefore my daughter's Dell 8300 with XP Profesional HD crashed it started with up with WINDOWS XP Propfessional while it loads. I replaced the HD and reinstalled XP Pro with service pack 1 from the original CD supplied by Dell. So far so good. I went through all the updates, downloaded and installed service pack 2 for Pro. Now when XP loads it no longer displays "Professional" It displays as if its XP Home. In other words, Windows XP with out the Professional banner. When I check system info it states XP Professional is installed.
View 4 Replies View RelatedI changed the computer which is running Windows 2000 server from a domain to a work group and then rebooted. When it came back up The password to get into windows was no longer recognized.Can I reinstall windows 2000 without losing files and still get back into windows?I have already done the F8 thing, It seems to be booting fine. It's just when you get to the login screen it won't accept the password.
View 7 Replies View RelatedI am running a computer with Windows XP SP2. When I put a card in my card reader it used to automatically open the picture download wizard. When I put in a DVD it automatically opened Power DVD. When I plugged in my MP3 player it automatically opened its associated software. Now, nothing seems to auto start.
View 7 Replies View Relatedsince i got XP, my microphone no longer works. It says that it doesn't detect it and that I should plug it in but I'm 100% sure its plugged in, Ive checked. For some info that may help u, I dont have a headset mic. Just one that sits on your desktop. Its definatly plugged in, I have SP2 for XP Pro.I previously had Windos ME where my mic worked fine. Ive tried doing the audio tuning wizard, but it still says I dont have a mic plugged in and it doesn't detect it.
View 5 Replies View RelatedI'm not sure exactly what brought this on since this is a nearly fresh install of windows, but I have had a problem accessing any web content with internet explorer except for the web itself (thanks to firefox). This means, Help files, Windows update, web forms, and many other features are completely unusable. Whenever I acess any kind of content through IE or it's engine embedded in windows, instead of displaying the HTML I am prompted to download it (open/save dialogged) this is a serious problem and I dont want to re-install windows yet again but it looks like I might have to if things keep going this way.. any help? I havnt been able to find a single mention of this problem on google
View 1 Replies View RelatedSo I can't update windows or anything. I can't gt automatic updates to start. When i go in services.msc in start>run i try to start the process for automatic updates and it won't let me. I go to manual, click start, and it says 'could not start automatic update service on local computer. Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it'. Now when I go to auto updates in control panel, it is set on automatic, however it doesn't do it.
View 11 Replies View RelatedAbout 5 hours ago my pc crashed, since rebooting my usb keyboard no longer works when it reaches windows login. I'm completely lost with this and it's infuriating me.
- I'm running windows xp
- Never had this issue before with keyboard, it's always worked until 5 hours ago
- There is no fault with the keyboard, I've tried in on 2 other systems and it works fine
- There's no problems with the USB ports all other usb devices work and work on all the ports.
- The mouse as well as all other usb devices work fine
- I've uninstalled the keyboard several times and reinstalled with no luck
The keyboard is a generic dell one using a dell system.
- The device manager doesn't report any issues. The keyboard is listed as installed and working properly.
- The keyboard does work in BIOS just not in windows
The only way i can get into windows is to use remote desktop from another pc so i can use another systems keyboard to control this pc which is what im doing now.Having endlessly searched for a solution, nothing has worked. There was a registry fix but it hasn't worked. One thing I thought may have caused it was before I had made a registry change to IRPStackSize to try to resolve a network issue. I reverted this change back and still no response from keyboard.
I was leaving to work, so I left the computer in standby. I got home about 7 hours later and when I tried to return to desktop, the fan went on loudly but kept on going and nothing would be displayed on the screen. I just turned it off by the front panel button and went to sleep. This morning, I tried unplugging the whole machine from the electricity plug and replugging it in..well it worked! It started but the fan was constantly working for some reason.I downloaded SpeedFan and at the time the temp was like 43 (normal?). Then I turned it off to see what was wrong with the fan. I opened the box and did a small vacuum just trying to collect the dust.after that NO LUCK.The computer doesn't even come on anymore. I have important files on it.I'm going to be screwed.
View 7 Replies View RelatedI have been playing around with my computer (running windows xp) and found that I'm no longer able to install new software (its says it could be in safe mode).I'm also unable to access the restore function, and the search function. When I do go through the control panel it opens the restore to a blank box (box with no text of instructions or calendar). On the search function it shows a blank box with the yappy dog and no text
View 1 Replies View RelatedMy son was just using his computer last week, it was working fine. He goes to use it the following day and he cannot connect to the internet. We have multiple laptops in our home along with a desktop. We all can connect just fine. We can't figure out what is going on with his. I've tried to reboot,we've tried connecting to the hard line, we've checked out the wireless router and the signal is fine. We've played with everything that we can play with and nothing works?
View 5 Replies View RelatedI have several workstations that can access the internet and xbox and ps3 just fine. but for some reason my main pc can no longer access any website page, but can still browse the LAN and get to the routers homepage, and i can get my dchp from router so we know this is not a physical layer one issue with the nic card or network cable, it seems like its just a http port 80 issue? any suggestions maybe reset my IP stack?I have moved my question to the "Networking section" can you please remove
View 1 Replies View RelatedWhen I go into control panel then to display desk top I noticed I have many pictures I no longer want for my desk top. Any ideas how to remove the ones I no longer want?
View 3 Replies View RelatedAm running a new laptop with XP SP2. Been working perfectly for a month. I was getting program exceptions in IE6, so I downloaded and installed Firefox. It worked OK, but I could not remove the annoying Google search bar, so I uninstalled the whole Firefox using their uninstall tool that comes with it. Now, I have remnants in the Firefox directory, it didn't do a clean uninstall. But worse- now when I click on any desktop icon (shortcut), Windows asks me what program to use! It opens a window and I select Internet Explorer and check to always use this option, but it does not "remember", so the next time I click that (or any)shortcut, it asks again.
View 2 Replies View RelatedI am helping my sister fix her laptop. I am using mine to post and search since hers is very slow. When you try to scroll it rolls the screen (very irritating).MFDnSC was helping me but I think he went to bed (plus, i think I drove him nuts !)Sorry about that MFDnSC, my house is crazy with my 3 kids all under the age of 6.
So anyways I need Help. Below is the latest hjt log, I really hope someone can help me.At this moment I am running ActiveScan and so far it has found 3 spyware and 4 hacking tools and potentially unwanted tools.
After several weeks of successful running, my Toshiba Satellite T7200 Core2 Duo Laptop (2 Gb DDR2 SODIMM, 100 GB SATA HD) WinXP Pro SP2 with latest patches (Windows Update on) no longer boots normally:System hangs in Windows Start Up screen.Boots and runs successfully in Safe Mode On 11/01, I manually created a System Restore Point after several days of successful operations including booting. When the system hangs in the Windows Start Up screen, and I boot into Safe Mode, the system is successfully booted into normal WinXP Pro SP2 by using the manually created Restore Point. No other (WinXP created) restore points work, i.e., they all hang in the Start Up screen during boot.
View 18 Replies View Relatedwas cleaning up PC, ran spybot/virus scan then turned my attention to the hard drive. When I ran Error Checking though, it took MUCH longer than normal and when I rebooted the taskbar was missing and IE would no longer start. This is XP Prof SP2 btw. I checked the obvious taskbar settings, tried restarting explorer.exe via task manager, ran sfc, undid the changes made by spybot and still nothing. I also tried to system restore, but it wont let me load it, saying "system restore is not able to protect your computer. Please restart your computer and try system restore again."
View 5 Replies View RelatedI have an Acer Aspire laptop with WinXP and all the usual rubbish installed, I have had this since around September of last year and got it for a little less as the packaging was opened 'basically someone decided they didn't want it?' i'm more than happy with it and have installed lots to keep me and family happy - the problem i've got is it won't update via Windows Update: i get an error message:
"Files required to use Windows Update are no longer registered or installed on your computer. To continue:
Register or reinstall the files for me now (Recommended) or Let me read about more steps that might be required to solve the problem