I have pentium 4 running Windows XP.I tried installing a Compaq 5 Port USB 2.0 PCI card in my computer but the computer will not recognize it.I have 2 open slots and it won't work in either.
View 11 RepliesMy computer has lost it's sound. As for as I can tell the computer does not reconize that it has a sound card. This happened suddenly. My computer is a SONY, Pentium 4, 1500mhz. 1.50 ghz,384 mb of ram, using Windows xp, version 2002 with service pack 2. Anyone have any ideas? From my records the computer had an Intel Intergrated audio card.
View 8 Replies View RelatedI recently reformatted the HD cuz of the viruses. The OS XP Pro is installed and working but the system does not recognize any network card. There is no separate network card but it is built in on the motherboard. anyone can help how to go about finding the network card that is on the MB and then recognized by the system. So I could dl the drivers required for it.It is a HP SFF (small form factor machine).
View 15 Replies View RelatedOk guys my problem is also involved with video games. I tried to install Steam (a program that runs Sierra games such as Counter-Strike) but when i try to install it this thing pops up "You do not have access to make the required system configuration modifications. Please return this installation from an administrators account." Ok guys I also tried to install this game "World Of Warcraft." I tried to install both these games but the computer keeps blocking! When i try to insteall Steam that note pops up (see above). When i try to install World Of Warcraft, the nstallation bar stops and remains at the middle. I left it installing for the whole night last night. When i woke up the bar is still at the middle , like 50%. Ok so anyway, all of this is because of the Administrator access problem. I have checked other topics that relates to this problem but it didn't solve my problem
View 2 Replies View Relatedi have always been the administrator on my computer. now it does not recognize me as that...actually it doesn't show anyone as the adminisrator. it shows my account as limited
View 1 Replies View Relatedcomputer will not recognize my dvd writers. xp operating system
View 3 Replies View RelatedI assumed when I bought my second Dell, I could just take my old floppy drive and slave drive from my old one & put it in the new one. However, the new computer won't recognize the floppy and the inputs on the back of the drive in the new computer are totally different than both drives in my old one. The drive I want to install is a Seagate Barracuda 120gb. It uses a 20 pin cable, but the drive (NCQ SATA)in the new computer has a much smaller cable input & I can't figure out how to install it. Any input? On a separate note, is there any way to connect two computers, such as with a serial cable, to read the drives on the second one (without using a router).
This problem does not occur in word or in word pad because they have their own right to left controls. however in excel or notepad even in explorer the computer refuses to recognize that I'm writing in a right to left language.I tried:uninstalling and reinstalling right to left support plus the right to left language reinstalling microsoft office even though it is definitely an operating system issue uninstalling and microsoft office.
View 4 Replies View RelatedXP Pro hangs on start-up. Hadn't used computer in months. Started and had problems. hit the wrong key at wrong time and have messed up 1 or 2 system startup files. As soon as windows begins to start, it auto shuts down and trys to re-start. The computer will not recognize the XP Pro upgrade disc in my cd-rom drive so I can do a repair. How do I force the repair of the corrupted files?
View 13 Replies View RelatedMy operating system, Windows XP, comes up with several error messages when I try to open up system files or programs that concern the "Computer Administrator". I then checked in the Control Panel to make sure that my name is in fact the admininstrator, and it is, to no suprise. But whenever I try to open these programs it either says this has been disabled by the administrator. The administrator has turned off this feature.
I don't know why this happens. I find out a way to fix it and then when I close it, it won't let me reopen it without fixing it again. Some programs that I have tried that don't work and give me this or a similar error message are, System Restore, Task Manager, Regedit, and Windows Update.
I have a Windows XP home SP2 computer that has a Sony DVD RW DW-D22A that supposedly supports both -R and +R. Well I bought a stack of 100 Blank DVD-R and less than 1/2 way through the stack they turned into lousy DVD's. Both for DVD movies and data storage they wouldn't work. I would get this CRC check sum error message. I contacted the manufacturer and sent in a few samples and they replaced them - sent me two stacks of 50 - nice company. Well I just burned a data disc and my computer doesn't recognize anything being on the disc - I even get the "You have inserted a blank cd/dvd window" thing on my screen. I then tried to burn a dvd movie using a different program and that program doesn't even recognize a disc being in the drive (yes I did put in a fresh dvd before I started the program).
View 6 Replies View RelatedI recently put together a new computer for my girlfriend, but didn't have the time to stay during the entire Windows installation. Apparently, while XP was installing (my girlfriend had gone out) her mother attempted to follow the prompts ( ); during this she mis-typed the serial key, and didn't know what to do... according to her, the installation froze. She couldn't tab to get back, and it didn't recognize the mouse. She restarted the computer, and apparently was able to get windows to install. My girlfriend called me later to tell me that "the screen is all wrong, the colors don't look right." Upon asking her what the problem was, she replied "the screen." 'Describe it to me' "it's the monitor". 'No, what's wrong with it?' "THE SCREEN DOESN"T LOOK RIGHT!!!". Heh. You can see what i'm dealing with. I had her go into desktop settings to crank the resolution up to at least 1024x768, and high colors; after she hits apply, nothing happens.
I told her to install the drivers for the graphics card. She's tried twice; each time it goes through the driver installation, and tells her to restart. Upon restarting, it goes to the Windows loading screen, and then (as best I can tell from what she's telling me) the monitor looses signal from the PC. Screen goes black, monitor light goes from green to orange. Computer is still on; it doesn't restart. She can only get back in via safe mode...........
my sister tried to get on the internet today (we have dialup - modem connection) but it wouldnt go.After a bit of tinkering around, I discovered her modem isnt even being recognized by her PC, that is, on the list of installed hardware theres no "modem" sub-list at all.Its always worked until now, there hasent been any major changes to the system, and the modem is still installed and secured properly.I THINK it may be caused by a virus, I done a virus scan on her PC with RemoveIT Pro, and there were 3 viruses, I removed them hoping it would help, but it didnt. I also done a system restore to an earlier time, didnt help.This happened to my PC a few times before, and the only way I could fix it was to do a whole system recovery...but I cant find my sisters recovery disc anywhere, and I dont have a Windows XP CD for a clean install or anything, so I thought about seeing if I could activate her modem in the BIOS, but her PC is diffrent than mine and I cant seem to find it (pushing F1/other buttons while its starting up dosent do anything)
View 14 Replies View RelatedMy brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies View RelatedI am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies View RelatedI have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies View RelatedI recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
View 1 Replies View RelatedI keep getting this error "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it". And if I leave my PC on to long the keyboard, mouse, and sometimes even the monitor stop working. I've tried unplugging the keyboard and mouse (which are not USB) and plugging them back in, but to no avail.
View 8 Replies View RelatedI have two almost identical (one of them has only 40Gb drive) Dell 8400 computers that worked very well together networked till yesterday. Both of them have same OS version including updates.I had to do a PC restore on computer A and since then Computer B doesn't recognize computer A. I went through Network Wizard, made sure the computer names are unique and the workgroup name is identical on both machines. Computer B doesn't even show local shared directories anymore.Computer A finds computer B without any problems.BTW, Computer B works fine otherwise; I can access Internet, a network drive without any problems. I did hardware ping test and board test and they all pass.
View 2 Replies View RelatedI tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies View Relatedmy external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
Firstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again.
I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I have a PC with a built-in media card reader, and when I use the compact flash portion of that reader a certain program is always launched. I would imagine that initially I indicated which program to open. Is there any change to change that program?
View 3 Replies View RelatedIm not very computer smart...but i have AMD Athlon 64 processor 4000 NVIDIA GeForce 6150 LE Graphics My guess is i have a good processor and a horrible graphics card...the games i play such as call of duty4 and ship sim 08 realy glitch on my computer so i was thinkin of getting this card called GeForce 8800 GT super+ 1GB video card...is this what i should get..??it costs aobut 200$
View 1 Replies View Relatedso my Radeon Sapphire X1600 Pro (256MB) crapped out on me mainly the video feed. So I purchased a new one didn't really look at it very well but its a Geforce 7300GT 512MB and when I install the latest drivers and promptly restart the computer it freezes on the Windows is now loading screen.
Now I have 1 guess as towhy its doing this is insufficient RAM but I'm not sure.
Can anyone reccommend a good sound card for my computer for music production and also I have been told my computer speed needs to at least 300ghz to run these applications together,,,,Any ideas I thought memory makes the computer run faster.
View 1 Replies View RelatedI just installed Windows XP Pro SP2 on my laptop and I think that it isn't recognizing my wireless card. Its in-built into the laptop, but I'm looking at my device manager and its not seeing a wireless adapter.I need to upgrade to a newer version of Windows.
View 1 Replies View Relatedlaptop has got the ZLOB virus and I am trying to get rid of it but I cannot connect to the internet because the drivers for the ethernet card are missing. There is no id on the laptop apart from the COA for XP and Z600 on a sticker underneath it. How can I find out what make it is so I can find the drivers. I don't mind paying for the drivers or a virus remover as long as they work.
View 4 Replies View RelatedWhile I was deployed my wife inserted an Mini SD card in to the card reader built into the computer. When she removed the card windows locked up, as soon as she reinserted the card windows worked fine. She removed the mini SD card from the adapter to use in her phone, and windows still worked fine, but as soon as she removed the Mini SD adapter from the card reader windows locked up and the windows would hang during start-up with out the adapter. Reinserting the adapter cured the freeze and hang, but windows ran very slow.I removed and reinstalled the card reader drivers and was able to remove the adapter, but windows still hangs on start-up with out the adapter placed in the slot.
View 3 Replies View RelatedThis problem just came out of no where today. i installed a TV tuner card, cinema 4D (3d render program) And i think i formatted a HDD (40gig) as well. but overall my computer is being much slower that it ever has.
View 5 Replies View RelatedI built three computers with Abit NF7S (used) with Athlon 2800 (new) XP Pro with the same cheap power supplies (400 watt) that came with the case for 20 bucks. One of these computers has been restarting itself about one time every two weeks for no apparent reason since the day I put it together. When I send the error report in Microsoft says "a device driver". But does not know details. The other computers have the same video card and programs? I did ncheck the restart after fail and now a blue screen comes up with a bunch on lingo.
View 4 Replies View Related