I recently reformatted the HD cuz of the viruses. The OS XP Pro is installed and working but the system does not recognize any network card. There is no separate network card but it is built in on the motherboard. anyone can help how to go about finding the network card that is on the MB and then recognized by the system. So I could dl the drivers required for it.It is a HP SFF (small form factor machine).
View 15 Replies
I have pentium 4 running Windows XP.I tried installing a Compaq 5 Port USB 2.0 PCI card in my computer but the computer will not recognize it.I have 2 open slots and it won't work in either.
View 11 Replies View RelatedMy computer has lost it's sound. As for as I can tell the computer does not reconize that it has a sound card. This happened suddenly. My computer is a SONY, Pentium 4, 1500mhz. 1.50 ghz,384 mb of ram, using Windows xp, version 2002 with service pack 2. Anyone have any ideas? From my records the computer had an Intel Intergrated audio card.
View 8 Replies View RelatedDuring the day, my internet connection died, actually, my NIC did sort of got error 10.I tried to uninstall and re-install it, and it seems to go back but then I get the error code 10.I installed a new Belkin USB NIC and it installed fine but also returns error code 10. I installed a Hawking USB NIC and it installed Ok, but returns error 10. I installed an old 802.11b SohoWare PCI card, and it installs fine, but returns error 10. I installed a Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller and it installed fine, just still get the error 10. I un-installed each NIC that didn't work and re-booted before installing the next.This all sounds like a virus that can attack any network device, as any form of network device fails on error 10.If I didn't have a few computers laying around,I couldn't make this post.I also checked all services between the computers, networking settings, group policies, BIOS settings, etc. to look for something different on the bum machine, but nothing is obvious that caused the one machine to allow a NIC to be installed, but then cannot be used. (I'm running XP-Pro, SP2)
View 6 Replies View RelatedI have an ethernet port that is physically connected to my motherboard. For some reason, when I formatted my main drive, and re-installed Windows XP, it will not detect it no matter what I do. I tried searching for new hardware through Windows as well, but nothing seems to be working. Luckily, I have an ethernet card laying around that I wasn't using, so that's how I'm connecting to the internet right now. A little bit about my system: I am connected to a Linksys WRT4G router, which is connected to my cable modem. When I plugged in the ethernet card that I had laying around, it found it right away and is working fine. I'm just that kind of person that feels if it isn't working how it's supposed to work I get all cranky. My type of motherboard is listed in my sig.
View 5 Replies View RelatedI have an unused Belkin PCI network card installed in my desktop XP pc. I don't want to see it listed at all under the Network Adapter listing in Device Manager. I understand that I can easily disable it, and have done that by right clicking on the drop down list and selecting Disable. I have also selected Uninstall but of course every time the pc is booted up again it finds the device and it reappears listed within the Network Connections again. Is there any way short of actually physically removing the card from the pc to actually uninstall the card "for good" and prevent it from showing up in Device Manager and Network Connections again?
View 3 Replies View RelatedI am trying to set up a home network. However after installing a Belkin F5D7000 Wireless Desktop Network Card I get the following error: PCI Simple Communications Controller Error.. Search For Drivers. I have the installation disk and I have tried manually pointing the Hardware Wizard to the file, but it will still not pick up the drivers. I have the latest drivers from Belkin - no joy.This is the second card I have tried and after installing into another computer it worked fine. However the machine I am trying to install onto is older. Pentium III 450 on a B7XAN Motherboard. O/S Windows xp pro.
View 3 Replies View RelatedAfter reinstalling Windows XP Home edition on my PC I have found that a driver for the Network Card could not be found (see attached file containing pics). In Device Manager the network card does not appear under network adapters but instead under other devices as an Ethernet Controller with a yellow question mark and exclaimation point. Unfortunately, Windows does not appear to have a driver and I can't connect to the internet to search for one.I tried installing DriverGuide which says the device is an "82551 10/100 Mbps Ethernet Controller" made by Intel.
View 2 Replies View RelatedA client has a win2k SP4 box that connects wirelessly using a Linksys WMP55AG card to a Linksys WRT54G. I have scanned the box with Spybot S&D, Ad-Aware, HijackThis, and AVG. I have emptied all temp directories and caches. I used RegTweak to address registry inconsistencies, and have run LSPFix and FixWinsock. Now, if I boot the machine with the network card enabled, it connects fine to the router, gets internet access and runs fine, for about 2 minutes. Then, the machine freezes and becomes 100% unresponsive. The only way to resolve this is to power down explicitly. Now, if I boot up and disable the network card, even after it has connected, then the machine does not freeze. And, if I wait a few minutes, and then re-enable the network card and allow it to connect, it does and yet it does NOT freeze. At all. It has been useful now for over five hours. If I restart the machine with the card enabled, it will freeze again after two minutes. I do not think that it is an issue with the card as it would freeze regardless of when the connection is made. There are also no entries in the event logs that pertain to this in the least.
View 1 Replies View RelatedI come home to visit my family for Christmas last night and use my old desktop. its working fine besides its a little slow. i figure its from my little sister downloading stuff. easily fixed problem. so i try to fix the problem by deleting things that were useless to her and i and were making the computer slow. i restart the computer and my windows xp theme has disappeared, there are no more network places or networks, for that matter, and i have no sound card now.
View 4 Replies View RelatedI tried to install ZoneAlarm last week which crashed during the installation. This has caused multiple issues:1 - Can't shut computer down - I can get to the "log off", "shut down" and "restart" option of which none do anything so I'm forced to unplug as the power on/off doesn't work either. I've checked the power management options and these are normal.2 - Can't connect to the internet via my network card. Replaced the card as the network cable works on laptop and though it was the card but no luck(Modem goes to router which splits to 2 PC's and laptop
View 3 Replies View RelatedI have a Windows Media Center 2004 edition PC. It connects to my home network via integrated WIFI card.IS there a feature that could enable a Wake on WIFI as opposed to a
wake on lan?there is no option on the properties of my wifi adapter, but i'm dying
to know if this is possible?
Whenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
View 13 Replies View RelatedFirstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again.
I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I have a PC with a built-in media card reader, and when I use the compact flash portion of that reader a certain program is always launched. I would imagine that initially I indicated which program to open. Is there any change to change that program?
View 3 Replies View RelatedIm not very computer smart...but i have AMD Athlon 64 processor 4000 NVIDIA GeForce 6150 LE Graphics My guess is i have a good processor and a horrible graphics card...the games i play such as call of duty4 and ship sim 08 realy glitch on my computer so i was thinkin of getting this card called GeForce 8800 GT super+ 1GB video card...is this what i should get..??it costs aobut 200$
View 1 Replies View Relatedlaptop has got the ZLOB virus and I am trying to get rid of it but I cannot connect to the internet because the drivers for the ethernet card are missing. There is no id on the laptop apart from the COA for XP and Z600 on a sticker underneath it. How can I find out what make it is so I can find the drivers. I don't mind paying for the drivers or a virus remover as long as they work.
View 4 Replies View RelatedWhile I was deployed my wife inserted an Mini SD card in to the card reader built into the computer. When she removed the card windows locked up, as soon as she reinserted the card windows worked fine. She removed the mini SD card from the adapter to use in her phone, and windows still worked fine, but as soon as she removed the Mini SD adapter from the card reader windows locked up and the windows would hang during start-up with out the adapter. Reinserting the adapter cured the freeze and hang, but windows ran very slow.I removed and reinstalled the card reader drivers and was able to remove the adapter, but windows still hangs on start-up with out the adapter placed in the slot.
View 3 Replies View RelatedI am trying to access the internet with my windows nt system but it appears I can't. I may have the wrong NIC card but I was told by 3com it was the correct card.
View 8 Replies View RelatedI have Windows XP Sp2 whe i try to chanhe ip in "Local Area Connection" i got following message:" Network Connetion Folder was unable to retrive the list of network Adapters":i checked "Services" .Ok working fine then what 's the problem??
View 1 Replies View RelatedI try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies View RelatedI have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
View 14 Replies View RelatedI need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies View Relatedi have a problem with my network folder.It seems that I can't see my existing network connections in the folder! I first noticed this when i click on my dial-up connection the connection window won't come up.When i open the network connections folder in the control panel, an error message comes up with this message:The Network Connections Folder was unable to retrieve the lsit of Network adapters on your machine. Please make sure that the Network Connections service is enabled and running.
View 6 Replies View RelatedMy network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
View 5 Replies View Relatedi recently have done a reinstall of windows xp but the system cannot seem to be able to find the systems video card drivers and i have checked on the properties under adapters and the whole list says n/a so i have no way of find out what drivers i need to download. I have an emachines 5250 if that is any use.
View 2 Replies View RelatedWe have a vender that wants to use our printer at work which is hooked up to our network but he can't join our network because he is not an employee.Just spoke to him and he has a Sony Vaio laptop and DOES NOT WANT ANY DRIVERS on his machine. Im lost. I was just going to install drivers on his machine and hook the printer up USB but he just formatted his machine and now doesn't want any drivers at all.
View 7 Replies View Relatedwhen I browse "My Network Places", the browsing is so incredibly slow. It takes a long while when you click one icon in the “My Network Places” for that to open up and go to the next directory or when just first displaying the computers in “My Network Places”, it goes so slow.
I use Windows Workgroup on the LAN to share out internet. Everything else, other than browsing the network, works great. The internet browses nice and fast.
This morning I opened My Network Places while my pc was still loading all the programs at start-up and "My Network Places" was fast. After a few minutes it was back to normal low pace. Now I guess it is something running on my pc slowing it down. Is it maybe to do with XP Service Pack 2? Before installing SP2 the network browsing on my pc is fast, after installing SP2, it is slow. Other computers on the network without SP2 browse the network quite fast.
All the pc's on the network has XP Pro.
ok, i recently ordered verizon online dsl the first area of concern is the fact that the brand new installation cd is scatched beyon the point of working. so i call the number and tell me we are going to it manually. OK that is fine by me. well then they tell that my dial up connection is getting in the way of my ethernet card. how i can check and see if my ethernet card is properlly installed?
View 8 Replies View RelatedMotherboard Epox EP 8KDA 3J
OS XP SP2 Home E
AMD 3000+ CPU
Memory Upgrade
Original setup Had two 256 Rosewill DDR400
one open slot
INSTALLED 512m ampo D400 35145588-P-R
Into Slot #1
PC Ran OK with 512 Ram
Installed one of the Rosewill DDR400 256
into Slot #2
PC Ran OK with 768 Ram
Installed Rosewill DDR400 256
into Slot #3
PC would not Boot
Does not seem to recognize 3rd Slot
My log in name doesn't really do my novice pc skill justice. I am actually dumber than a PC spare.
I decided to leave the stone age sort of and bought a copy of windows xp home to extend the life of my POS just a couple more months. I didn't want to buy a new computer and got a deal on a copy of xp home. I am planning on buying components and building a system from scratch soon, but for now just needed to keep going. Several of the sites I like to frequent recently upgraded and no longer support ME. The copy of xp I received turned out to be an OEM Windows XP Home w/ service pack 2.Like a moronic bozo I set my IOLO Drivescrubber into motion and whiped my HD clean. I didn't change anything in the bios as one: don't know how to and two: afraid to. Once the drive was clean however it failed to recognize the cd rom of xp. I then remembered I had to format and partition the drive in order for it to do so.
