When I put in a CD Rom disk and I try to run a program there is an error window and it sais,"16 bit Windows Subsystem C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Chose 'close' to terminate the application." Than there are two buttons Close and Ignore.When I click Ignore nothing happens.When I click Close nothing happens too.This only happens to a couple of my CD's, not all.They worked before but now they don't.
Trying to dowload and open a pattern book I bought online,everytime I try to open,it says C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and microsoft applications.Choose close to terminate.I run Windows XP.
Computer is running way too slow.. switching to local intranet instead of internet and when i tried to run PCPitstop's diagnostics i got the following message: The system file is not suitable for running MS-DOS and microsoft windows applications.
i try to install a program and i keep getting the message. "C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable fo rrunning MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application." What can i do to install this program?
There are certain things on my computer that get a certain error message, one of them is a combat chess program on my control panel add/remove list that i cannot get rid of and this is the message i get
" C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application. "
i have windows xp. when i put in certain games, and encyclopedia cds, i get a window that pops up and says: c:WINDOWSSYSTEM32AUTOEXEC.NT. the system file is not suitable for running ms-dos and microsoft windows applications. i have tried everything to get my stuff to work. a guy told me to go to the properties of the game, and set it to run compatability for 98, so i did. but it didnt work. i really need help fixing this, so i can get my encyclopedia working.
I am running Windows XP with SP 2 and when I try to load certain software that use to run on an older PC with 98 SE I get a message saying 16 bit windows subsystem C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS_DOS and Microsoft Windows applications. Choose 'Close@ to terminate the application. What does this mean and is there a way round this as some of the software used to load and work okay on this PC but has been uninstalled but cannot now ne installed. This happens with a number of software packages.
I get the following message when I open windows xp and some programs don't work. C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
I'm getting a message: autoexec.nt the system file is not suitable for running ms-dos and microsoft windows applications.choose close to terminate the application. seems I'm missing these files:
config.nt autoexec.nt command.com
I tried to recovery them off the recovery disk but they are not there either. is there someplace I can get these files? I went to microsoft.comsupport and tried to put them in through notepad like they said and it did'nt work, must be doing something wrong.
I open the cd drive (for one of the CDs), double click on setup.exe, and get the following annoying message:
"The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application."
However, I also have the option of pressing ignore. When I do, it does the exact same thing as close So I really don't have a choice of opening the program. I really would like to use these CDs.
I have tried using the windows compatibilaty tool, but still the same thing happened. How should I get them to work? Also, old files I download from the internet also have this problem.
I keep getting this error mesage when trying to install some programs C:windowssystem32autoexec.nt. the system file is not sutable for running ms-dos and microsoft windows applications. choose 'close' to terminate the application.
In Win XP when I try to load all my older C.D. programmes, I get Error Message:- 16 Bit Windows Sub System. C/WindowsSystem 32Autoexec.N.T. The System File is not suitable for running MS-DOS and Windows Application. Close to terminate aplication. Having looked up other methods of resolving the problem I still can not get any results.
Every time I try to open C: (while going to My Computer > Double Click C it gives me the "choose program you want to use to open this file > File C:" i also get this whenever i try to open other drives (usb,external,drives)
Has anyone heard of an 03 file extension or a program that will open these files. I have searched for this extension on the net but came up with nothing. I am wondering is there such a file.
I have the same problem with some programs that I want to install in my pc. I receive this problem error message:C:WINDOWSSYSTEM32AUTOEXEC.NT the system file is not suitable for running MS-DOS and Microsoft Windows Applications. Choose Close to terminate the operation. There are several softwares that I would like to install on my pc but I cant because of this error One is a game, the other one is a program I need ot make programs and the last one is a typing software.Is there a way that I can install them on my pc?
Every time I right click on a file and chose open with then choose program it always, with out fail, no matter what the extension,assumes I mean notepad.exe. AVIs to Zip files get Notepad. I suspect a registry entry but I don't know where to look and Google failed to find anything close to what i was looking for. The problem first occurred with my HOSTS file. I typed the c:windowssystem32driversetchosts into my run and instead of the Choose program it immediately opened in notepad, convenient in that instances but not the majority of the time...
I have checked for Spyware (clean), run AVG (clean), and I am very reluctant to reinstall windows, again. Last time they tried to force me to purchase a new copy of windows pro after installing it and activating it on the SAME system (not this computer) for the third time. They wanted to know when/where/ and what model I purchased.
Recently, I tried to open a very large file into Photoshop. It froze, and my computer crashed, so I restarted it by turning off and on the power. When it started up, it was normal, but it got to that screen that tells you that it was shut down incorrectly, and asks if you want to go into safe mode, normal mode, last good configuration, etc.When I go into normal mode (or last good configuration), it gets to the Windows Startup screen (flag w/ green bars moving below), but then the computer just restarts itself.
After formatting my new 120-gig outboard hard drive to NFTS,I backed up my entire C: drive - and yes, it did take ten hours - and I now have a 20-gig Windows .bkf file.I'd like to be able to open the file and see - and perhaps use - the contents if I do something dumb. I tried opening it using the suggested XP backup utility, but while it does seem to be able to return the the backup to the C: drive, it apparently doesn't 'unzip' the file for examination
A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
a program called "System Guard 2008" has installed itself. It slowed down quite a bit and eventually crashed on me. Now it wont boot up all the way. I turn it on, it will get all the way to the Windows password screen, then once I enter my password and click on the green arrow, I get a warning message that my paginf file is either non existant or too small. Then once I click "OK" on that warning message, the screen blacks out, restarts the boot process, gets to the password screen, and that cycle just continues over and over. Ive tried to boot into safe mode, safe mode with command prompt, last known good configuration
when ever i start any video application it shows that something has gone wrong and prog is to be closed,and pror closes everything on desktop closes and disappear only to reappear again after some time.
I was able to open the windows it self but the problem is i can't open any program most of the time. i did virus scan system mechanic thingy but still it wont let me open a program. but 1 suspicious thing ive noticed is that is happening when im turing the internet on. Inspiron 530 with 4 gb mem quadcore processor, belkin n adapter wondows xp.
When I try to open my desktop properties,windows firewall,add or remove programe,user account it shows the follwing dialog -cannot find"C:WINDOWSsystem32 undll32.exe". Already I use malwarebyte v1.30,Super anti spyware but it doesn't work.
I was having this problem on my old install of XP, which desperately needed a new install. In any case, I'm now using a freshly installed version of XP, and everything has been running perfectly for about 2 weeks. Suddenly, this one problem reappears: The File Open / Save As dialog box (aka Windows Common Control / comctl32.dll) takes forever to open (20 seconds to 60 seconds). I just did a chkdsk and defrag, and that did not solve the problem. Also, there are no network drives connected which could be slowing things down. This happens in both MS programs (such as Notepad) and 3rd party programs (such as Firefox).
Why can't I get XP to open every folder using the "Details" option? I do have it set so that it remembers (most of the time) to re-open that folder with the file view it was in when it was closed, but I want XP to open every new and old folder with the "file details" view. Seems like a simple thing, but I can't get XP to understand that's what I want.
I recently had to do a system restore and now my .jpg and jpeg files have a bad file icon. They still do open with the windows pic program as I want them to - but only on the admin accout, I usually surf and play and do everything else with a user account, and even if I reset everything under folder options for the file associacions it somehow doesn't apply to the other account.
windows tells me in the file association menu that I changed the file association's properties and can set them back to standart "photo suite 6" - a program that I uninstalled ages ago
I was doing some detailed drawings in photoshop, and I also had a generic photo up in photoshop as well. I went to save my drawings, but apparently accidentally saved the photo under the drawins name and then closed the program. This morning I discovered the bad news. Is there a way to get that drawing back? I do not know if it was ever saved before.
I have a cd burner and xp and was wandering how can i record a movie file that is on a file sharing program what type of recording cd do i use i don't have a dvd burner.
I have a file damaged in my Windows, i dont know if i need it or i should repair it and even how to, but i was hoping someone can lead me in the right direction. The file is in my downloaded program files Windows/system32/IUCTL.DLL, THE PROGRAM FILE DOESNT HAVE A NAME BUT USES AN ID
Tonight I tried opening a chm file and it failed, with that error message. This happens for any chm file I have tried. I don't know when this broke, I know I used to be able to open chm files with no trouble but I can't pinpoint the last time it worked.I've searched around and found some references to this, but no solution -the only relevant MSKB is for Win98. I tried regsvr32 hhctrl.ocx, deleting the hh.dat files, clearing IE's file cache; nothing has helped. I haven't made any significant recent changed to the system that I can think of.
