This is really starting to aggravate me. I fixed a computer for a guy by re-installing Windowx XP on it with Service Pack 2. He installed Service Pack 3 after I specifically said "DO NOT INSTALL SERVICE PACK 3!!!". Anyways, it started acting funny so I have it back. Now when it starts up I get a black screen full of zeros on it right after the Gateway screen. I am trying to put a fresh copy of Windows XP on it, but all of the writing is jumbled and the zeros remain. Anyone experience this and know how to make it display correctly again? Everything looks fine once it gets into Windows or on the Gateway bootup screen, just the "dos" screens have zeros on them and I cannot do anything with it like this.
Hi, I have been avoiding shuting down my computer because when I reboot I can't always get back to my Desktop. All I get is a black screen asking me if I want to try some differnet ways to boot up, After trying all the different choices the only way that works is "Last Known Good Configuration ( your most recent settings that worked)" Then finally after that I get the desktop with this error saying RUNDLL error loading C:PROGRA~1MYWEBS~1ar1binF3SCRCTR.DLL. What ever that means? Then it says The specified module could not be found ok.
My pc starts to load windows xp then i get a black screen and nothing happens,i got over this last night by hitting f8 and using debug mode but tonight nothing works.
Tonight, when I just open IE and Outlook Express, all of a sudden, the screen turned black with a message, 'Time is running out', in the middle of the screen. Then the computer halted and I needed to reset the computer to restart the computer. Does it mean that it is time for me to change to a new harddisk or it is of some other problem?
I got a problem I use a developer program to make executables (hobby of mine saves me going troppo) called Clarion, it works OK, I made a DOSable program with it, it works OK. Once I could open to full size DOS screen by pressing the Alt+Enter keys and it would stay open until I was finished with it, then I could revert back to a small screen by pressing Alt+Enter keys again.
Now if I press Alt+Enter keys the DOS screen appears, but it stays open in full screen for a couple of seconds then automatically closes back to the usual small screen.
I have tried right clicking on the icon, properties, screen and putting a dot in the full size option, but this does not work.
I have scanned my PC for viruses etc but no joy there. I have Dialup only, so don't ask me to do a Panda or Trend scan as they drop you if you no got broadband.
I'm using XP pro, 512meg ram, using a Gigabyte MB, and Nivida video card. XP working OK-dokie, sound ok-dokie, video ok-dokie, screen to DOS wonkie. how to fix this?
This all started out that I was having a microphone audio recording problem the other day and was trying to solve that...A couple of days ago, I did a complete HP System Restore on my computer to try to fix the problem, not realizing that it would do all that it did to my computer. Im having to re-install alot of my programs, etc. Now When Im trying to watch a video online, if I click the 'full screen' view it comes up just totally white screen with no picture at all.
I have searched for some weeks now and have seen an increase in people who also found that while viewing in the Full Screen option on You Tube and/or Hulu.com that the "Press Esc to Exit Full Screen" message that appears in the center of the screen does Not fade away after a few seconds. Of course that makes Full Screen viewing unacceptable. I posed the question to the site itself and have never received a reply. One general forum said something about Unlocking certain Files (Adobe) that were found locked because of cookie handling upon installation, but as a novice that is beyond my comprehension.In any case, is anyone aware of a fix for this problem? (That message is not suppose to stay there) I am using Win XP IE8. I tried viewing using the Firefox Browser (3.5.2) and it did not help.
stop: 0x00000050 Does this mean anything to anyone?I tried installing Windows Xp SP3 on a new hard drive and then this happened when it said windows is booting or something like that.I may have missed a few zeros in the codes, as its a bit hard to distinguish how many there are when they are all bunched together.
I tried upgrading my os to vista then decided I wasn't going to but ever since then I have been having problems with windows xp. When I boot up, I am given an option of choosing windows xp, or windows xp setup. I then have 3 situations: 1.If I choose windows xp my computer runs normally. 2.If I choose xp setup nothing happens I get a blank black screen. 3.If I do nothing I get a black screen that has one message, at the top it says windows is missing <windows root>system32hal.dll..How can I set my computer back to its normal state?
I can't thank you guys enough, you have helped me a bunch. anyways i went to a website and all of a sudden my computer turned off and i tried to turn it on and it works until 5secs in it would go to a blue screen telling me ways of fixing and to use f8.
All of a sudden the other day my OS (Win XP Pro, SP II) froze shortly after bootup. I was able get on Firefox but the mouse froze on the XP screen when running any HD application. Ctrl-Alt-Delete didn't free up the mouse, and doing it twice got no response.Earlier, I couldn't find any conflicts on the Device Manager.I changed my mouse connection from USB to Serial, but that made no difference...This AM, Windows booted up OK, but the screen froze right after a few tray & desktop icons had loaded. Ctrl-Alt-Delete still didn't function for a shutdown...Strangely, the Num-Lock light and the mouse underside red beam stayed on after shutdown.
Hey, basicly my old Hard drive for some reason or another died. I got a second hand one off a friend which I beleive and he beleives to be allright. = Baracuda 7200 .6 160gb HDD IDE... Obviously when starting it gets stuck on Error loading OS.. So I restarted went into boot menu and placed CDDrive as no1 boot. Placed my XP disk in... it went through the stages: Press any key to boot.Setup is inspecting your computers hardware configuration now on the blue screen of "Press f6 if you need to install a third party SCSI or RAID driver that passes by what should appear next is sposed to be a screen saying "press enter to install windows xp or R to repair," but that doesn't load up instead I am stuck with.
I was recently issued a new laptop at work and after a few pushed updates from our IT department, I discovered that everytime I boot I now get a strange screen just after the Windows logo but before the login prompt. The OS continues loading about 5 seconds after this message is displayed. I've contacted our IT department but they don't seem to know either.I have a strange feeling it was caused by a failed update. Judging by the spelling mistake in the message and the timing of the error, my guess is that it originates from a 3rd party driver/software. It is interesting to note that when booting up in safe-mode the error screen does not present itself. This further makes me suspect a driver of some sort. There are also no related errors in the Application or System Event Logs.
I am having a problem with my computer whereby I have a screen before my computer begins to boot and this screen used to show for about 3-5 seconds then disappear. In the last couple days this screen has been sitting there for anywhere up to 5 minutes before the PC even reaches the loading XP screen
Hi there. I was wondering what the procedure is to deactivate the Logon screen during the bootup stage of Windows XP. I currently have no password set, and don't wish to have one either.
How can I change the resolution of Windows XP bootup screen? i.e.The screen of Windows XP logo with a blue moving bar(Change from 640x480 to a higher resolution)
I have Windows XP with sp2 i believe. I purchased this computer back in 2005 so its pretty old but i havent had many problems with it until recently. I didnt have internet for about 2 years so my comp was safe from viruses and whatnot. i just got internet about 2 months ago and since then my girlfriend has been downloading numerous files through frostwire, many containing viruses. I have an 80gig hard drive that has 2 partitions. one is my C: drive and the other is my D: drive which is my recovery drive. My computer did not come with any sort of recovery disk, only the 2nd partition on my hard drive
I run ScanDisk on a locked drive eg the drive with my op system and it suggests I run it at bootup, the bootup fails (and there is no Scan)- after the initial beep and basic b&w info, the screen just goes blank (no mouse pointer etc) - the red light flashes away on my PC box indicating a lot of hard drive activity though, but I've left it half an hour and it's got nowhere. Exactly the same happens if I instruct my anti-virus program to do a boot-time scan (Avast). My only recourse is to press F8 at bootup and select Start with Last Good Configuration and I can get back into Windows.
When I turn my computer (HP s7527c Desktop) on it only boots to the HP Administrators screen. There is no password required. If I click on the icon it only reloads the same screen. Can anyone explain what is wrong? If I click on F10 (PC Recovery) during bootup the computer works ok after the recovery process is complete.I have only had this computer less then a year and I cannot find any answer on the HP site or from their support.
Every time I boot up I get a blue screen that says I have a a disk error, but I can cancel the test. If I let this run and let it start testing, It responds with "unspecified error" after a second or two. I have manually run the disc checking on all HDs. No errors found. Is this some kind of a joke, a virus, or distraction so some malware can load?
When I upgraded my computer from 2000 to XP Home Ed., the guy at the store installed a new motherboard, and then installed the XP. He spelled my last name wrong, and now everything in the registry with my name is spelled incorrectly. I want to be able to fix that. Also, I would like my computer to bypass the welcome screen when it boots up.I had it set up to do that, but then I did something to cause it to go back to that screen, and I can't get the bypass to happen again.
Dell inspiron 1000 2.2 celeron 256 ram 40gig Win-xp.the machine had recovered from serious error. Upon rebooting the windows program would not load and the hard drive made a clicking sound. I went into setup and no value was set for the hard drive. then the clicking stopped for no apparent reason and i got the windows to load. i went on line for about an hour then the clicking noise started again and the unit shut itself off and tried to reboot on its own. again i went to setup and no hard drive was detected. I did nothing but look around in the setup and again the clicking stopped on its own. the windows loaded again and i am online just now creating this message. Usually the cooling fan would be running alot, however i did not hear it running at all since the blue screen.I have had numerous blue screens. the online search always points to the Sonic Record Now as the culprit but offers no solution.
I use full screen programs, usually games, my pc automatically minimizes the program to show the desktop. anyone experience this? i think it is from a program i installed coz everytime i reformat my pc.
I have win XP Home and somewhere the next screens quit being full size. I tried the trick used in WIN me of stretching the corners of the screen to make it full size, but the next time it does not come up full size. I don't believe it did this when I first started using WIN XP, but with many program additions, it just started to happen. My PC is a COMPAQ with 2.5 Celeron. PC is only 4 months old.
I have an XP workstation that runs a DOS application that is started up using a PIF file. The DOS app runs fine but does not display a full screen vertically. Horizontially, it displays a full screen since I checked the Full Screen mode in the PIF file parameters. I want to have the entire screen taken up by the display of the DOS program. Two other PCs (one a WIN98 PC and the other a WIN2K PC) display in a complete screen.
We are trying to recouperate after loosing our PC in a total burn-up. Were up and running on the new one, with some glitches to be worked out.How do I get pages to open full screen-especially E-mails?
