I have win XP Home and somewhere the next screens quit being full size. I tried the trick used in WIN me of stretching the corners of the screen to make it full size, but the next time it does not come up full size. I don't believe it did this when I first started using WIN XP, but with many program additions, it just started to happen. My PC is a COMPAQ with 2.5 Celeron. PC is only 4 months old.
When i open programs such as google, netflix, local library and most all pages they do not fill the entire screen. I always have to click on the maximize button. How do i remedy this issue? Running XP Pro... Athlon Xp 2600 2.08 Ghz with 512 Ram.
Some time ago, I must have inadvertently "pushed a button" and the page size for Internet Explorer changed from "normal" to "magnified". I can't figure out how to change it back. Going into control panel and changing the screen resolution size has absolutely no effect. (I never re-adjusted the screen size anyway). It's so annoying to have to constantly work the page bars up and down, back and forth! I think the same thing has happened to AOL.
Using WIN XP (Home) with all updates. After installing IE7 and running my RegCleaner I noticed an inordinary number of files being clean by my Cleanup pgm, How can I check page sizes of temp files and what is the optimumn size ?
I will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
I am running 2 gig of ram on a 160 gig harddrive Presario. I don't usually keep over 3 windows open at any given time. I know Windows suggests 1-1/2 times ram for page file size, but that seems to slow the start-up. What is the minimum I can get away with and be safe? Or do I really need a page file? any input is helpful.
Recently, as the available free space on my 60 gigs hard drive dropped to 3 gigs, I started getting an error message at bootup that said that the virtual memory page was too low or zero along with intructions on how to change it in the Control Panel.I have since changed hard drives, installing a 100 gig drive in my HP Pavillion laptop. I have changed the virtual memory setting in the control planel from "Let Windows Manage Memory" to setting actual limits. It is currently set to 2048 megs. Nothing I do will eliminate the error message at bootup. While the responsiveness of the computer was very slow when I had the nearly full drive, it seems to have returned to normal with the new, large hard drive.
I am using an elderly 3M LCD projection panel on an overhead prjector for big screen Tv, driven by XP pro SP3. The panel has no controls for vertical/horizontal size and whatever monitor is used, an OS desktop fills the screen by default. I can resize the window for the TV viewing program in the normal way,just filling my projection screen, but the XP desktop is far too large.Does anyone know of a way to change the physical size of the desktop (including the taskbar) so that it sits in the LCD screen with a blank border all around, or maybe even make it custom resizeable as in a program window ( without changing the resolution)?
This isnt really a problem but i was wondering if your page file size really makes a difference on performance. I tried to switch it up from 755MB to 900MB hoping it would make games run faster but it switched right back to 755.
I have a Dell Dimension 5100 with Winxp pro sp3 1 Meg of RAM and extra 500 gig hd: I changed (increaded) the Page File zise (Virtual Memory) on both drives and it corrupted the Registry. Now it does not even let me re-install winxp on that drive. Towards the end of the installation I get a message that it cannot copy certain files. The file names varies according to the SP version on the winxp pro cd. Also, I lost the original OS disk from DELL.
When I open my home page (Yahoo), the font size always reverts to "larger".If I set it to " smaller" , it will revert to "larger" when I revisit my home page. I change it at ;VIEW >TEXT SIZE > SMALLER. How do I get it to stay the size I set it at ?
I got the error message that there is "Not enough paging file or virtual memory" and instructed me to change the paging file size. Which I did.My RAM is 256MB btw. Here's a pic of the Virtual Memory ctrl panel:after changing the page file size, the "Currently allocated" file size is still at 0 MB. No matter how many times I've changed it (Yes I've clicked Set everytime) and rebooted my PC, it's still at 0 MB. And then the error message keeps coming out at every reboot.Here's a pic of the Performance Option control panel.
I am running Windows XP, i want to change my virtual memory to custom page file size, can someone tell me the ideal minimum and maximum sizes recommended.
I was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs
When i open any link with "open in new window" the new window is not full size screen window.Of course i dragged it by mouse many times and that should fix it later.It means it should be opened as it had been dragged,but that's never happened though i dragged it about a hundred time as a full screen size.What is the wrong here?
My control panel has changed from a page full of icons to a long dropdown strip of small icons with there lables.There is no obivous way in to alter anything.
I got a problem I use a developer program to make executables (hobby of mine saves me going troppo) called Clarion, it works OK, I made a DOSable program with it, it works OK. Once I could open to full size DOS screen by pressing the Alt+Enter keys and it would stay open until I was finished with it, then I could revert back to a small screen by pressing Alt+Enter keys again.
Now if I press Alt+Enter keys the DOS screen appears, but it stays open in full screen for a couple of seconds then automatically closes back to the usual small screen.
I have tried right clicking on the icon, properties, screen and putting a dot in the full size option, but this does not work.
I have scanned my PC for viruses etc but no joy there. I have Dialup only, so don't ask me to do a Panda or Trend scan as they drop you if you no got broadband.
I'm using XP pro, 512meg ram, using a Gigabyte MB, and Nivida video card. XP working OK-dokie, sound ok-dokie, video ok-dokie, screen to DOS wonkie. how to fix this?
This all started out that I was having a microphone audio recording problem the other day and was trying to solve that...A couple of days ago, I did a complete HP System Restore on my computer to try to fix the problem, not realizing that it would do all that it did to my computer. Im having to re-install alot of my programs, etc. Now When Im trying to watch a video online, if I click the 'full screen' view it comes up just totally white screen with no picture at all.
I have searched for some weeks now and have seen an increase in people who also found that while viewing in the Full Screen option on You Tube and/or Hulu.com that the "Press Esc to Exit Full Screen" message that appears in the center of the screen does Not fade away after a few seconds. Of course that makes Full Screen viewing unacceptable. I posed the question to the site itself and have never received a reply. One general forum said something about Unlocking certain Files (Adobe) that were found locked because of cookie handling upon installation, but as a novice that is beyond my comprehension.In any case, is anyone aware of a fix for this problem? (That message is not suppose to stay there) I am using Win XP IE8. I tried viewing using the Firefox Browser (3.5.2) and it did not help.
I use full screen programs, usually games, my pc automatically minimizes the program to show the desktop. anyone experience this? i think it is from a program i installed coz everytime i reformat my pc.
I have an XP workstation that runs a DOS application that is started up using a PIF file. The DOS app runs fine but does not display a full screen vertically. Horizontially, it displays a full screen since I checked the Full Screen mode in the PIF file parameters. I want to have the entire screen taken up by the display of the DOS program. Two other PCs (one a WIN98 PC and the other a WIN2K PC) display in a complete screen.
We are trying to recouperate after loosing our PC in a total burn-up. Were up and running on the new one, with some glitches to be worked out.How do I get pages to open full screen-especially E-mails?
I have been getting full screen popups. They are promoting all nature of things,ringtones ,anti virus progams and of course a perfect cleanup progam. Thr header states the name of the item and always "Windows internet explorer."they cause no damage but are very annoying.All the popup stoppers seem to be in place and turned on.
I have an Armada e500 laptop running Windows 2000. When I boot it up, the display is not full screen. There is about a 2-3" black border all around the Windows desktop. Its like a miniature version of my desktop? How did I do that? I can't drag the corners or otherwise make it larger by anything I tried. How did this happen? Does this mean my LCD is shot?
I want open IE and see the page displayed in the "Full Screen" mode. No matter how I close IE (6.0 SP2) when I re-open it comes up in what I assume is the default "small cluttered screen" mode. I know how to get my display into "Full Screen" using the View menu drop down or by clicking on the Full Screen icon and by using the F11 key. What I need to know is how to get it to open as a "Full Screen" every time I open IE? Is there a setting I can change so I do not have to manually change into "Full Screen" each time I use IE?