Bootup - No Password Required - HP Administrators Screen
Aug 8, 2007
When I turn my computer (HP s7527c Desktop) on it only boots to the HP Administrators screen. There is no password required. If I click on the icon it only reloads the same screen. Can anyone explain what is wrong? If I click on F10 (PC Recovery) during bootup the computer works ok after the recovery process is complete.I have only had this computer less then a year and I cannot find any answer on the HP site or from their support.
I'm having trouble booting my system. Before I take it in, I decided to try and repair the OS from the provided OS CD. When I select repair, it asks me for an Administrators password to continue
I have windows XP SP2 installed on my system and i just foregot the admin password. I tried with Austrumi nt_pass utility but its not workin onmy system may bcoz of SATA disk or coz of linux and vista is also installed on same system.
I am setting up XP Pro on a PC that was previously running W98. I did not use the upgrade option. I used the new installation option.During the setup, it asked for the names of the accounts to set up. I set up 3 accounts and did not set up any passwords for these accounts. When the PC rebooted, I got the Welcome screen w/ the 3 account. All require a password. I cannot get past this screen since I do not know a password for the accounts. I have tried blank, as well as the names of the accounts.
A friend of mine is having a problem where he cant log into his computer. But he told me that he did not create a password for the computer. It also has a password on the admin account as well when I go through safe mode. So I took he hard drive out and set it up as a slave on another computer and scanned with nod32 and found and clean virus's. Still asks for a password. i tried ophcrack and it could not crack it. Tried offline password and that did not work either. Only thing I can think of is that maybe someone else put a password on it without him knowing it. Anyone possibly ever hear of a virus or something thats done this before.
I have no reason to pass protect my home computer. I would like to turn the unit on and go directly to my desktop without going through the password screen. I'm sure there is an easy way to do this but I can't seem to get pass the sign-on page.
My XP Pro machine at work has recently started running extreamly slow on bootup. It runs fine up to the username and password window, but as soon as i sign in it then takes atleast 15 min before i can use it. I have a PF usage of 2.24 gig during this time and my HijackThis details are below:
I tried upgrading my os to vista then decided I wasn't going to but ever since then I have been having problems with windows xp. When I boot up, I am given an option of choosing windows xp, or windows xp setup. I then have 3 situations: 1.If I choose windows xp my computer runs normally. 2.If I choose xp setup nothing happens I get a blank black screen. 3.If I do nothing I get a black screen that has one message, at the top it says windows is missing <windows root>system32hal.dll..How can I set my computer back to its normal state?
I can't thank you guys enough, you have helped me a bunch. anyways i went to a website and all of a sudden my computer turned off and i tried to turn it on and it works until 5secs in it would go to a blue screen telling me ways of fixing and to use f8.
Hi, I have been avoiding shuting down my computer because when I reboot I can't always get back to my Desktop. All I get is a black screen asking me if I want to try some differnet ways to boot up, After trying all the different choices the only way that works is "Last Known Good Configuration ( your most recent settings that worked)" Then finally after that I get the desktop with this error saying RUNDLL error loading C:PROGRA~1MYWEBS~1ar1binF3SCRCTR.DLL. What ever that means? Then it says The specified module could not be found ok.
All of a sudden the other day my OS (Win XP Pro, SP II) froze shortly after bootup. I was able get on Firefox but the mouse froze on the XP screen when running any HD application. Ctrl-Alt-Delete didn't free up the mouse, and doing it twice got no response.Earlier, I couldn't find any conflicts on the Device Manager.I changed my mouse connection from USB to Serial, but that made no difference...This AM, Windows booted up OK, but the screen froze right after a few tray & desktop icons had loaded. Ctrl-Alt-Delete still didn't function for a shutdown...Strangely, the Num-Lock light and the mouse underside red beam stayed on after shutdown.
Hey, basicly my old Hard drive for some reason or another died. I got a second hand one off a friend which I beleive and he beleives to be allright. = Baracuda 7200 .6 160gb HDD IDE... Obviously when starting it gets stuck on Error loading OS.. So I restarted went into boot menu and placed CDDrive as no1 boot. Placed my XP disk in... it went through the stages: Press any key to boot.Setup is inspecting your computers hardware configuration now on the blue screen of "Press f6 if you need to install a third party SCSI or RAID driver that passes by what should appear next is sposed to be a screen saying "press enter to install windows xp or R to repair," but that doesn't load up instead I am stuck with.
I was recently issued a new laptop at work and after a few pushed updates from our IT department, I discovered that everytime I boot I now get a strange screen just after the Windows logo but before the login prompt. The OS continues loading about 5 seconds after this message is displayed. I've contacted our IT department but they don't seem to know either.I have a strange feeling it was caused by a failed update. Judging by the spelling mistake in the message and the timing of the error, my guess is that it originates from a 3rd party driver/software. It is interesting to note that when booting up in safe-mode the error screen does not present itself. This further makes me suspect a driver of some sort. There are also no related errors in the Application or System Event Logs.
My pc starts to load windows xp then i get a black screen and nothing happens,i got over this last night by hitting f8 and using debug mode but tonight nothing works.
Tonight, when I just open IE and Outlook Express, all of a sudden, the screen turned black with a message, 'Time is running out', in the middle of the screen. Then the computer halted and I needed to reset the computer to restart the computer. Does it mean that it is time for me to change to a new harddisk or it is of some other problem?
I have just installed a linksys wireless router onto my desktop computer to add a wireless laptop and for some reason, when the User Logon screen comes up. The hand cursor never becomes a cursor for me to type in passowords to user accounts. I went into safe mode and then into control panel and deleted the passwords for each user acct and now I can get into the accounts but how can I add the passwords again and be able to type them in. We have 3 user accounts on this pc and would like to have them password protected.
I am having a problem with my computer whereby I have a screen before my computer begins to boot and this screen used to show for about 3-5 seconds then disappear. In the last couple days this screen has been sitting there for anywhere up to 5 minutes before the PC even reaches the loading XP screen
Hi there. I was wondering what the procedure is to deactivate the Logon screen during the bootup stage of Windows XP. I currently have no password set, and don't wish to have one either.
How can I change the resolution of Windows XP bootup screen? i.e.The screen of Windows XP logo with a blue moving bar(Change from 640x480 to a higher resolution)
I run ScanDisk on a locked drive eg the drive with my op system and it suggests I run it at bootup, the bootup fails (and there is no Scan)- after the initial beep and basic b&w info, the screen just goes blank (no mouse pointer etc) - the red light flashes away on my PC box indicating a lot of hard drive activity though, but I've left it half an hour and it's got nowhere. Exactly the same happens if I instruct my anti-virus program to do a boot-time scan (Avast). My only recourse is to press F8 at bootup and select Start with Last Good Configuration and I can get back into Windows.
Every time I boot up I get a blue screen that says I have a a disk error, but I can cancel the test. If I let this run and let it start testing, It responds with "unspecified error" after a second or two. I have manually run the disc checking on all HDs. No errors found. Is this some kind of a joke, a virus, or distraction so some malware can load?
When I upgraded my computer from 2000 to XP Home Ed., the guy at the store installed a new motherboard, and then installed the XP. He spelled my last name wrong, and now everything in the registry with my name is spelled incorrectly. I want to be able to fix that. Also, I would like my computer to bypass the welcome screen when it boots up.I had it set up to do that, but then I did something to cause it to go back to that screen, and I can't get the bypass to happen again.
This is really starting to aggravate me. I fixed a computer for a guy by re-installing Windowx XP on it with Service Pack 2. He installed Service Pack 3 after I specifically said "DO NOT INSTALL SERVICE PACK 3!!!". Anyways, it started acting funny so I have it back. Now when it starts up I get a black screen full of zeros on it right after the Gateway screen. I am trying to put a fresh copy of Windows XP on it, but all of the writing is jumbled and the zeros remain. Anyone experience this and know how to make it display correctly again? Everything looks fine once it gets into Windows or on the Gateway bootup screen, just the "dos" screens have zeros on them and I cannot do anything with it like this.
Dell inspiron 1000 2.2 celeron 256 ram 40gig Win-xp.the machine had recovered from serious error. Upon rebooting the windows program would not load and the hard drive made a clicking sound. I went into setup and no value was set for the hard drive. then the clicking stopped for no apparent reason and i got the windows to load. i went on line for about an hour then the clicking noise started again and the unit shut itself off and tried to reboot on its own. again i went to setup and no hard drive was detected. I did nothing but look around in the setup and again the clicking stopped on its own. the windows loaded again and i am online just now creating this message. Usually the cooling fan would be running alot, however i did not hear it running at all since the blue screen.I have had numerous blue screens. the online search always points to the Sonic Record Now as the culprit but offers no solution.
A few days ago I tried to update my families pc to SP2 so I could get all the updates etc. It seemed to install alright, but then when starting up it gave me some drwatson.exe error which ended up freezing the pc. So I did what I thought was safest at the time and that was to go back to a restore point and then maybe try reinstall SP2. BUT, after restoring, windows suddenly showed the password/log on screens. I now can't log on as Administrator OR Guest. Nothing works. I've tried EVERY possible password that I could have used in the passed, but nothing works. So now I can't get into the pc at all. I've tried booting up in safe mode and logging in as administrator with a blank password, but that doesn't even work. I've read a lot about it online, and it seems the only solution would be to reinstall XP. But would that work as a format and erase some of my files and/or settings? Or would it just be like an upgrade?
In the past, I have used the S-video port (with RCA adapter) in a dual view setup with my TV. I recently reinstalled Windows XP and now I can't get the secondary display (the TV) to work correctly. I just get a bunch of black & white lines moving up the screen (looks like bad reception/static on a TV). The weird thing is that the TV displays everything fine during the bootup process, including the loading screen with the Windows XP logo. Full color and everything. It's when Windows actually starts that the TV freaks out. Another weird thing is if I use nVidia's TV setup Wizard and select "Span," the image on the TV actually stabilizes. But I am forced to keep a low resolution on the monitor (which wasn't the case before I reinstalled XP), and as soon as I make any other changes the TV goes back to freaking out.
I need to make more administrators, but i dont want to make more accounts. i have 1 that is administrator and 3 that are limited users. But i cant remember how i whent about making them limited.
