Backup Hard Drvie File Appear
Jul 18, 2005When I right click any file or folder and select send to, my f drive, which is my backup Hard Disk, does not appear.
View 6 RepliesWhen I right click any file or folder and select send to, my f drive, which is my backup Hard Disk, does not appear.
View 6 RepliesI want to backup my PC for disaster recovery and then do an incremental backup each night to a USB hard drive. I tried Retrospect which came with the USB hard drive. I couldn't get it to work to well. I've been using the MS backup utility. With this software it seems any new email causes changes my large Outlook PST file and the whole
file is backed up again. I've been trying to find backup software which will backup just the changed elements of the pst file and have tried downloading a trial version of
continuity@work from Mobiliti who claim to be able to just backup the changes to a PST file. I left continuity@work running overnight and had to stop it as it was only 50% through the backup this morning. It calls it synchronization rather than backup and from the error messages it seems that it doesn't create a shadow image before backing up as several files were not backed up as they were in use.
After restoring a computer and backing up files, once the computer is back up and running should I have a foldercalled "My Backup 1408-08 2353" or should I have a single backup file called backup.bkf? I'm trying to help someone, and they have a folder with the files already available instead of a single backup.bkf file. He wants to restore everything to the original location before the computer restore. How can he do that with the folder he has instead of a backup.bkf file? The restore wizard is asking for a .bkf file to place everything in the original locations, and he doesn't have that.
View 11 Replies View RelatedI have two IDE hard disks one 40GB=C and the secondary 200GB=D,I have made a copy of documents and setting from C to a new folder backup in drive D.After that this operating finished I preformed format of C and installed from on drive C the MS WIN XP operating system.After the installation the backup FOLDER on drive D, changed to backup FILE without extension.How can I restore my DATA? anyone familiar with this phenomenon
View 3 Replies View RelatedI recently got a new computer with windows XP and I want to make a backup copy of my hard drive. I've been using win 98se in the past and always backed up my drive using the "Drive Copy" software and that always worked just fine. I tried using it to copy my new Win XP drive and found that it has a different format called NTFS. My Drive Copy doesn't seem to work with the new drive. Any suggestions? Do I need to reformat the new blank drive I want to copy to?
View 6 Replies View RelatedMy hard rive at the moment it making random sounds sometimes and is poretty much faulty so I am getting it replaced. What I was qondering is that is there any program that will backup my whole hard drive onto another hard drive I have and then when I get my new one all my settings will be the same. by the way I am aware I can just use my other hard drive as mine but I need that for anyther computer later
View 6 Replies View RelatedI am backing up data to an external USB hard drive. What should I backup? I don't have enough room to backup my whole hard drive onto the external. I'm looking for suggestions of specific folders ie. Documents and Settings, etc. as opposed to advice like "whatever can't be downloaded or replaced easily".
View 13 Replies View Relatedmy plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
View 1 Replies View Relatedi recently added an extra hard drive(40gb)internal to my e-machine running wxp-sp2.the new hd came with files i'd like to clear first.then,i want to copy my entire c (os) to the new d drive.is there a way to do so for free?
View 2 Replies View RelatedI have a 200 GB harddrive. I split it into 3 drives C:, D: & E:my C drive consists of XP Pro Operating System my D drive consists of a Operating System BACKUP file (I created it when I successfully installed XP Pro on my system) my E drive consists of some important documents & downloaded software files.Now I want to restore my C drive with XP Pro initial stages (from the Backed up file).If I do that will my documents in D & E drive exist and accessible? I cannot back them up into DVD's since they are very large and requires atlease 3 DVD's to store all the files.All I want to do is to restore my system to initial stages without loosing any files in my other drives.
View 2 Replies View RelatedBefore re-installing the XP operating system on my Dell desktop, a backup of the system (using the Windows System Utilities) was saved to an external hard drive. Then Windows XP Media Center Edition 2002 Service Pack 2 was re-installed. The *.bkf on the external hard drive was accidentally deleted. There was a warning that it was too large to go to the Recycle Bin before it was deleted. I want to un-delete and restore this *.bkf or at least get as many of the *.jpg files (digital photos) out of it. Is there some file retrieve program that will deal specifically with .bkf files given that it is so large (many GBs)? One program we tried didn't locate any *.bkf files.
View 2 Replies View Relatedafter doing a system recovery with a backup i found that the backup file is off no use to me anymore. The only problem is i can't delete it and it is taking up a large amount of space. I already tried going into safe mode to delete but it didn't work. i tried changing it from a read only folder but it says the file is either write protected or in use. i believe it may be somehow in use. if anyone knows how to delete this folder.
View 7 Replies View RelatedRecommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
View 4 Replies View RelatedI am looking for some backup software that can backup files and folders to another HDD and verify all files are not corrupted, then email me on completion of the backup outcome. Does anyone know of a good backup program that can do this?
View 5 Replies View RelatedI cannot figure out hpow to use win xp pro's backup utility. I have folowed the instructions, but always get an error meassage: The backup file name could not be used "D:ackup..bka' Please be sure it is a valid path and that you have sufficent access. Ok, what's happening here? I downloaded a demo copy of Nero 6 and instantaly made a backup. Why is the utility built into xp pro giving me a problem?
View 4 Replies View RelatedI got a WD "My Book Essential" 160gb external drive for Christmas, and as it does not come with backup software, I decided to try the Windows backup utility. I had to reformat the new drive from FAT32 into NTFS, and then I did a complete backup of the entire system. It asked for a diskette to create a boot disk, and then completed fine. However, when I looked at the .bkf file to see how large it was, it was 46 gb!! My hard drive on my pc that I backed up only shows 32 gb used. How could the backup file be larger than what was backed up? Is there some option/feature that I need to change?
View 3 Replies View RelatedI believe I have committed a fundamental eejit blunder. For reasons that are too complicated to explore here I cleaned my 140 gig Seagate C Drive (no, not that reason) with two wipes using the Kill Disk programme. I then re-installed XP Pro which also includes a formatting phase. All appeared well as I installed AVG anti-virus, Zone Alarm Pro, and Ad Aware; I then loaded Picasa, Adobe and all the bits and pieces that make for fun and utility.
View 4 Replies View RelatedI want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
View 4 Replies View RelatedPC (XP) wont boot, says NTLDR missing.I wonder if anyone could give me any advice about how to salvage my firefox bookmarks from my system which wont even boot. (the bookmarks are all i need to salvage from the c drive as my downloads files and documents are safely stored on my 2nd hard drive) My home PC (windows XP) died a death the other day playing up, wont boot now, says ntldr is missing, wont even boot up in safe mode, it doesnt get as far as giving me an option. (tried swopping cables around and stripped bare to the basics needed to boot but no such luck there either). Boots up with a unix live disc but i noticed it cant detect the c drive on the system, altho it does in bios.
View 7 Replies View RelatedI have a small problem with a couple of batch files that I'm using for a quick backup at work.When the batchfile has run I have noticed that there is a mismatch between the numbers shown for the original and the numbers shown for the backup. E.G my documents on the original might read :- 1500 folders / 13,385 files.Now if I go to the properties of the backup it might read for example 1500 folders / 13,357 files.Why the difference? Why does the batch not copy all files as asked of it.I am copying the documents folder on the file server to 2 other machines via a mapped drive as below
View 4 Replies View RelatedJust updated my new hard drive with the back up file from the old one. Backup went fine but when I deleted it, the 5 gig it occupied did not get freed up on the hard drive. Did I need to do something else besides delete it? Is it potentially lurking in another file?
View 5 Replies View RelatedI need to backup my PC, but the backup wizard gives the following message when I choose my DVDR drive as the destination: The backup file name could not be used "E:mybackup.bkf". Please be sure it is a valid path and that you have sufficient access.
View 7 Replies View RelatedI want to update my external hard drive that I keep music and photos on, but I don't know how to do it with completly rewritting the file. There has to be a way to update it, but I can't seem to figure it out. I'm running XP, and I have and External hard drive that runs through teh usb.
View 6 Replies View RelatedI recently sent my computer for repair due to virus-related problems. Anyway, the repair person had to reinstall Win XP(Home) from scratch and told me that he had partitioned the drive (and without my permission!) in two: DBackup and CSystem (Backup consists of the files from the previous system). I notice that there is a duplication of files due to this partition. For example, song A would appear twice on Win Media PlayerCDocumentsandSettings/Owner/My Documents/MyMusic/SongA AND Dmydocbackup/MyMusic/SongA). I don't know if there are any duplication of other files yet. Plus, I realised during Disk Cleanup that the system's Temporary Internet Files is located in 'Backup drive' instead of 'System'. Shouldn't this folder be in the other drive i.e. system drive, since Backup is just,well, backup(of the old drive). The WINDOWS folder also appears in both drives.
I've never had partitioned drives so this is causing major headaches for me. If there is a need for me to un-partition my drives to clear the mess, can I do it without re-installing the whole system from the Cd? Sorry it's a long one How many times can you reinstall from the Cd before it cannot be used anymore (I hear there is a limit)
My computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I
find out which/if this is associated to a particular driver so I can possibly correct it?
basically what im looking to do is delete some old entries that the XP backup utility has created over time that i setup a while ago. Im using the "copy" option.so nothing has been appended or incremental.Im just looking to avoid deleting the setup i got, and maybe just delete a few "copy" backups so that theres not 8 gigs / 1 years worth of backups.i only need about 4 months I forgot about it.cuz i never neaded it. But it looks as if its the only way b/c i cant just delete selected backups.all or nothing?/ anyone know of a better backup utility that is simple and easy on a system BTW?
View 11 Replies View RelatedWhen scheduling a backup using the Windows Backup Wizard, I put in all the scheduling info, but Windows backup never launches. When I look at a scheduled event and click "properties" I get an error message that says "General page initialization failed, etc, etc. (error# 0X80090016)
View 2 Replies View Relatedi created a backup file for my registry, and am trying to restore it due to minor changes i have made, but when i try to import, i get this error message: "cannot import (file name). Not all data was successfully written to the registry. some keys are open by the system or other processes." what does this mean? and how do i fix it?
View 2 Replies View RelatedCan someone walk me through this. I need to create a file on my hard drive that I can then save my financial info to when I am done reconciling my check register. How do I make a file that is going to be on my hard drive?
View 9 Replies View RelatedI have deleted some avi video footage from a digital camcorder from my USB hard drive. What is a good/cheap software that will retrieve my video for me?
View 15 Replies View RelatedI'm using XP Home and have been backing up My Documents regularly to an external hard drive with the back up utility in XP. The last time I tried to do a backup, I got an error message, "You have either run out of space or the backup (.bkf) is too large for this disk. Note: if this disk is formatted with Fat 32 , the maximum possible size for the is 4GB." My external disk is 75GB with 45GB free. It is formatted in NTFS. I did a clean up and defragged the disk and get the same error when I try to backup. Is this an indication of a problem with the external hard disk or a problem with the XP backup utility
View 3 Replies View Related