I keep getting this Application Error The instruction at "0x76c91645" referenced memory at "0x00000014". The memory could not be "read" Click on ok to terminate the program I get it closing certain programs by clicking on the X in upper right hand corner.like closing taskmgr.exe, spybot, adware, even HiJackthis, and some others. Ran adware, spybot, scanned for errors using Norton, scanned for virus etc.
View 8 Replies
Recently My computer has been crashing alot. I mean i havent downloaded anything. Its been the same since i can remember but now i get lots of errors. When i extract a file with WinRAR i later get a memory error, When running a setup.exe i get a refrenced memory error.Quote:The instruction at "0x6a9e05be" referenced memory at "0x6a9e05be". The memory could not be "read".Click OK to terminate the program
Click on CANCEL to debug the program If anyone can help it'll be greatly appreciated Ps. I did not yet Install Sp2.Also i have 512 ram.
whenever I try to use some part of Windows Explorer (e.g. opening Control Panel, Network Connections, folders on my desktop) I get an error message that says: "The instruction at 0x01dde065 referenced memory at '0x00000000'. The memory could not be 'written'. Click on OK to terminate the program" When I click OK, Explorer terminates and restarts, but still has the same problem. I tried restarting as well as running a System Restore and neither fixed the problem. All of my other programs appear to be working fine, and there is no noticeable performance drop.
I have an hp compaq nx 9010 laptop and recently got this message. i wonder if the change in ram has done it>? 1 chip is the original 256 mb, the other is a 512
anuyone ever seen this problem or know how to what is the cause of it or where it came from, and how do we fix it?
View 1 Replies View RelatedJust started getting this error message. [see attachment] It pops up seemingly at random; startup, browsing, even while I left the computer for awhile (no tasks running). The app is different most every time, tho (eg. <whatever>.exe).
View 6 Replies View RelatedToday, for the first time, when I signed on I get this big dialog box that states:winlogon.exe Application Error The instruction at 0x77f83aed referenced memory at 0x00440052. The memory could not be written. Click OK to terminate Click Cancel to debug.I tried BOTH Cancel and then OK with no results.When I clicked OK the programs would eventually come up, but I've found my application SCREEN SHOT DELUXE won't come up don't know if that is related or not.Also, had a little problem with Word Perfect on one boot, don't know EXACTLY what or IF these would be affected by this problem.I have a Dell 8250, Windows XP Pro, 512 RAM, 120 gig hard drive, 2.5 GHz.
View 14 Replies View RelatedI am trying to re-install a game on my computer. Due to a good virus attack, I was forced to reformat my hardrive and re-install Windows XP Pro. When I tried to re-install my son's game (one of those Sesame Street educational games) I get an error message saying that there is insufficient memory to run the application-- The title of the message box is "Can't run 16-bit application"; there is no error number. I have Googled for it, but the only answers I seem to get are for the autoexe.nt file being corrupt; however, my specific problem is not listed in the symptoms.
View 9 Replies View RelatedI am having major trouble with windows explorer. Microsoft doesn't even have the error on their website, at least that i can find. The error reads: "The instruction at '0xfe9ed428' referenced memory at '0xfe9ed428'. The memory could not be 'read'."
View 3 Replies View RelatedI get an application error on start up before ever making a move to open any programs. The instruction at "0x009a6f9a" referenced memory at "0x00000000" could not be written. The moment I noticed this issue was after an install of my Printer/Fax/scanner by HP, It is a wireless printer so the firewall asked if it should unblock for the install process. My question is should I try to go back to a restore point before that install or is there a workaround for this error.
View 9 Replies View RelatedI am having problems with Automatic Updates and I keep getting the following error:
svchost.exe -- application error the instruction at "0x745f2780" reference memory at "0x00000000". the memory could not be 'read'
I have tried numerous fixes and it will not work. I tried turning off AU and manually installing the updates but it just hangs up. It is only the Office 2003 updates that did not update.
give the information to me about this problem. can't run 16-bit windows program.
Insufficient memory to run this application.Quit one or more windows application and then try again.
I have got the following error on XP under a video editing app. The app is VirtualDubMod. I never got this error before. The error is below. The instruction "0x025397a8" referenced memory at "0x01bc39f0". The memory could not be read. What exactly does that mean? How do I fix it? Is it possible to fix it?
View 6 Replies View RelatedI have a graphic aplication, but when I try to open it the pc give the message (you need at least 3 mb of virtual memory) how I can increase that kind of memory?
View 8 Replies View RelatedIm getting this message when trying to restart windows XP. i get it even when i try to enter into safe mode. If I click on either option it restarts the machine. I cant even get access to the safe mode of windows
"Application error: Winlogon.exe. Click ok to close or cancel to debug."
I get INST32.EXE Application Error Box with Message Application failed to intialize (0xc0000006) Click Ok to terminate . push OK twice to remove box. I am trying to load my Printmaster Platinum 7.0 or 8.0 and neighter will load. I have been trying to get this fixed for over 3 weeks. Nothing I have found will work.
View 15 Replies View Relatedtmproxy.exe- application error it says the memery can not be "read"
View 1 Replies View RelatedThe Instruction at "0x75606eb5" referenced at "0x00000008". The memory could not be "read".Click OK to terminate the program.I keep getting these messages all the time but the numbers keep changing. it started when i my sister started typing something. the day before she had also spent all night typing. now i get that message for everything.Don't know what to do. I tryed disabling automatic updates and then updating it manually on website but when try i get redirected to Google.
View 53 Replies View RelatedAfter using Windows Explorer to view files and folders I get the following error message:Proxy Desktop - explorer.exe - Application error.The instruction 0x01f24213 referenced memory at 0x018dad58. The memory could not be "read". Click OK to terminate the program.I am using Win XP Home Ed with Service Pack 2 installed on a Dell Dimension 8200 with 512 MB memory. What is the simplest course for recovering from this problem.The program seems to work anyway.
View 6 Replies View RelatedExplorer doesn't load it just stops and when i close it i get this message.The instruction at "0x1001cd11" referenced memory at "0x1001cd11". The memory could not be "read".
View 7 Replies View RelatedI'm getting this error massage for a few days. It says:The instruction at "0x7c9111de" referenced memory at "0x00720065".The memory could not be "read".
View 9 Replies View RelatedGood morning, I have a couple of problems and I can't figure out how to get my computer back to where it used to be. I think it has something to do with updating windows. I get messages everytime I try to open a photo or a file. One message is Explorer EXE-Application Error, The instruction of ox600470a4 referenced memory at ox600470a4. The memory could not be written. Click on ok to terminate the program, click on cancel to debug the program. I clicked on debug and the program I got a message about Dr. Watson trying to communicate with ? and I clicked ok. Then the photo closed and all the icons disappeared and the reappeared. When I opened the same photo again, I got the following message. Data Execution Prevention-Microsoft Windows to help protect your computer, Windows has closed this program and also Windows Explorer has encountered a problem and needs to close, etc. Again the program shuts down. Basically, I can't open anything without the error messages. I can't copy cd's either as I have in the past with Nero. The program starts and then I get a read message or the cd just will not copy. Is there a way that I can do a restore and have my computer back to where it was 3 weeks ago? I could do that with my old computer Windows 98se. I have a HP Media M7060n now and I have XP home edition. Up to now I have had no problems. This computer is very different from my old one and I have no clue how I would do a restore. I just want a restore from 3 weeks ago, not a complete restore. I think the problem has to do with a windows update. I think I did one just before these problems occured. I lost my virus protection and had to reinstall it. I thought maybe that was the problem so I uninstalled it, but that wasn't it. So..here I am very frustrated. I know this post is long and I apologize. Thank you~Liz
View 6 Replies View RelatedWindows XP Media Center Edition Ver 2002 Acer Aspire e360
12/3/2007 10:26 AMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16544, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 6:28 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 7:32 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:49 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:55 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:56 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/1/2008 9:08 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 10:17 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 4:46 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x0002ae22.
I get one option "OK" i click on that, and I automatically re-boot. I'm returning this error when I boot:
SAS window winlogon.exe application error
I get the following error evry time my Windows XP Media Center PC boots
winlogon.exe - Application Error
The instruction at "0x0101050c" referenced memory at "0x117e4000". The memory could not be "read". Click OK to terminate the program Click CANCEL to debug the program When I click either the system reboots and I'm stuck here. I cannot get it to boot in safe mode but I can boot to a DOS prompt in the Microsoft Windows Recovery console.
I just got hit by a virus, it's all gone now. But one thing, it still messed up rundll32.exe and userinit. I cannot log in without, having to press control+ alt+delete, file, newtask, explorer.exe
View 1 Replies View RelatedAfter having the comp for a week or so (got it from a friend for cheap, in perfect condition) any time i try opening a program such as Word, the Open With screens pops up, and i have to find the program manually and open it. when try to open anything in the control panal, such as add/remove programs, an error pops up that reads:
C:WINDOWSsystem32
undll32.exe
Application not found
I just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
Error from any application that tries to access the Internet. This includes IE, the Live Messenger, Yahoo Messenger, Limeware, uTorrent, any application, the moment I try to access the Interent with it. For example, I'll get the error the moment I try to log on with MSN, but not when I initially launch the messenger. However, if I don't actually click the Don't Send button, the applications work just fine...The problem has started when I accidently turned off the PC without a proper shut down.I don't actually get the errors in Safe Mode, but then again, I have no internet connection there.
View 2 Replies View RelatedThis is a past post that someone else posted but I'm having the same problem and I did not understand the solution. Here is what he put:"Windows won't start up on my badly-infected WinXP PIV. It gets past the logging on to windows prompt and then this error message comes up userinit.exe application error (0xc0000005) and Windows then fails to load completely. This also occurs in safe mode and I haven't been able to bypass Windows and boot directly to DOS by using the F8 key on startup."
This is exactl my issue except I haven't tried to go to Dos mode b/c I didn't know how.This was his reply..."See if this helps:Restore WinlogonUserinit
Line #263 right side http://www.kellys-korner-xp.com/xp_tweaks.htm
I have an accounting program in which I have data files for each year of my business. These have been successfully backed up for years on CD and now JumpDrive, and stored on the desktop with a shortcut for easy access. I downloaded and installed SP2. Now when trying to open a file, I get the message C:XXXXXXXXX is not a valid Win32 application. It always was before so what changed?I cannot back up my current files because that is the name I've always used. The computer doesn't recognize the name as valid so I have no security.
View 1 Replies View Related
