For whatever reason, any time I try to print from Outlook 2003 I get the following:
SCRIPT ERROR Line: 2378 (if (printer.startDoc(this._aaRect[1][0],contentDocument.URL))
Char: 1 Error: Unexpected call to method or property access
Code: 0 URL: res://ieframe.dll/preview.js
I installed 2003 outlook and word (outlook editor) on my brand new Win 8.1 netbook and when typing the "TO" and "CC" lines the names show up but when pressing enter they will not be accepted. I have to enter the first couple of letters of the names and then press the "check names" icon and go through the list even though the one I wanted was the one that showed up on the auto fill line singularly.
I know the auto fill does not go to the outlook contact book but rather remembers the names as they are "sent".
I have used outlook for years on both Win XP and Win 7 (various 32+64, Pro, Ultimate) and now with Win 8 it will NOT work the same way. My brother has the identical netbook and is running Outlook 2007 and it performs the same way - will not allow enter to complete the autofill. Whatsup over there at MS?
I'm setting up my backup system as my main system is down for warranty repair on the motherboard.
I had Outlook 2003 setup on the main system in both Win 7 64 bit and Win 8.1 64 bit. I know Office 2003 is not supposed to be compatible with Win 8, but it works OK.
On the main system in Outlook 2003 when composing a new message, if I typed the first letter of an e-mail address in the "To" (or others) a drop down menu of e-mail addresses will appear and I could highlight the one I wanted and press enter and it would be entered on the address line. With the new install on this backup Win 8.1 system, when I highlight an e-mail address and press enter, all it does is enter the first letter and add a second line to the address line - see attached screen shot. I can't find where to enable this option (if it is an option).
Since last Win 8 update Outlook 2003 no longer autofills the address. I erased the nst file and started a new nst file with each new email sent but it still will not autofill address. I also reinstalled Outlook 2003 and still no joy. Outlook also locks up for a few moments when I enter the first letter and try to autofill.
View 1 Replies View RelatedAll of a sudden find cannot print emails in outlook keep getting this message "Something went wrong and we can't sign you in at the moment. Please try again later".
Have tried several times but still getting same message, has outlook turned itself off somehow.
I'm unable to print on my Xerox WorkCentre PE220. Win 8 installed the driver properly and did not show any errors or red flags during and after the installation. When I print a window shows up saying error cannot print.
View 9 Replies View RelatedIn continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
I am so confused about where outlook 2013 keeps things.
I have installed Outlook 2013 and would like to import my contacts from my outlook 2007 in another computer. I have already prepared the contacts.pst file from outlook 2007 and made it available in my public folders. I then imported the .pst file into Outlook 2013 via network. However the contacts shows up as a separate contact list rather than integrated into the outlook 2013 address book . How to correct it?
I must have got the process wrong.
The installation went easily and everything is set up but the Activation Wizard says it can't find an internet connection (which is nuts because I have Hughes Gen4 and have no issues with it, both wireless or wired).....and there is no phone number in the US to activate it anymore. Now what?
This is a full legal version and has already been updated by Windows Update so there are no issues with the product itself either.
I am running into a problem with newly upgraded windows 8 computers not being able to register DNS with our existing domain controller that is currently on server 2003.
I am getting the following error: The system failed to register host (A or AAAA) resource records (RRs) for network adapter with settings:
Adapter Name : {0D2F7524-B997-4850-BE6E-50B502FE46A8}
Host Name : ########
Primary Domain Suffix : #####.#######.com
DNS server list :
172.29.1.10, 172.29.1.12
Sent update to server : <?>
IP Address(es) :
172.29.5.145
The reason the system could not register these RRs was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.
You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
I blanked out the computer name and domain name.
I am trying to adjust Word 2003 to my liking. In Win 7 I have it set to occupy half the screen. In Win 8 I can set the screen size but on restart it reverts to a quarter screen. I have tried everything I can think of but it keeps going back to quarter screen again.
View 4 Replies View RelatedSys: Windows 8.1 Pro clients attached to MS 2003 server domain. (yes I know its best to have a higher win server version with 8.1, but i do not have that currently)
Ok, so the problem is that roaming profiles and folder redirection work but on only SOME of the windows 8.1 clients!!!!
How can these both work fine on only SOME of my essentially identical workstations?
I realize that I need different Profile types for the different OS's. I have applied the V4 registry edit and created a V4 default profile in my sysvol directory on the DC so that the workstations get a proper V4 starting profile.
All PC's are in same OU container.
My GPO's for roaming profiles and folder redirection have not changed from my XP workstations, Windows server 2003 domain controller.
So I create a new user, and log into one of the Windows 8.1 client machines on my local lan. Wow, profile works, V4 created in the profile share, redirection works perfectly. So I log out. I then remote to an identical PC across my wan. Log in as same user and it works fine, get the redirected desktop, and profile. But now the fun begins. I log out to complete the profile "swap" back to the server. I try to log back in and the disaster starts. (Yes, I have triple checked my permissions on all shares etc.)
I get the "DESKTOP cannot be loaded error". Logs show REDIRECTION SUCCESSFUL for my desktop!!! What the?
I have received the "redirection gpo not applied till next login" log, but it is intermittent. Its like the OS does does not know it nose from its butt! How can my desktop be redirected successfully and I get a message that my DESKTOP IS NOT AVAILABLE?
So I go back to my local lan machine and try logging in as this same user, IT WORKS FINE OVER AND OVER AGAIN!
How I can get my roaming profiles and folder redirection to work normally with my Windows 8.1 clients on my MS 2003 domain server?
I have a lot of excel spreadsheets with embedded links to jpg and pdf documents stored on an NAS. In both Win XP and Win 7 I could set the file association to make them always open in the Win picture preview pane.
In Win 8.1 they will ONLY open in IE11.
I have changed the registry as directed by MS in this article to no avail.
How to configure Internet Explorer to open Office documents in the appropriate Office program instead of in Internet Explorer
Locate the subkey for the specific Office document type.The following table lists the subkeys for several common Office document types. Microsoft Office Excel 97-2003 Worksheet Excel.Sheet.8
After you identify the subkey for the specific Officedocument type, follow these steps:
If the Office document is an Microsoft Office Excel document, add the following value for all Microsoft Office Excel subkeys except the Excel.Sheet.5 subkey:
Value name: BrowserFlags
Data type: REG_DWORD
Value: 8
I do not want to view them in IE which is harder to zoom, and my habits do not change as easily as MS thinks they should.
I'm trying to map a Server 2003 network drive in Windows 8.1
For some reason, in the 'Map Network Drive' window, the server doesn't show under 'Network' when I click the 'browse' button. Additionally the server doesn't show under 'Network' in file manager but I can ping it just fine.
Is there perhaps some kind of incompatibility between Win 8.1 and Server 2003 that could be causing this ...
I thought "great" it has it's own PDF viewer, no need to install Adobe Reader, but then I went to print is it possible? Am I not seeing a big button that says "PRINT" ?
View 9 Replies View Relatedsince getting windows 8.1, I find it does not have a right click print option. Others I have contacted say theirs does give right click print, is there a hidden menu somewhere to add options to the right click menu?
View 9 Replies View RelatedA newbie to Windows 8.1 (moving from XP!)...The new PC seemed to detect and install the drivers needed for our Canon MP610 no problem and I have successfully printed from Word. But when I open a saved pdf, it doesn't print: it just endlessly says 'spooling'.
View 3 Replies View RelatedI have always been able to print from my browser to my network printer. It shows up on the system in my new win8.1 system, but when I try to use CTRL + P to print from Firefox, nothing happens, and its not an option using the context menu. So am I not supposed to print anymore unless I use the apps supplied by windows?
If I select the print option in the hidden menu o the right (Charm?) I get a message "you can only print from an app" Is a browser not an app? I thought that an app was just slang for a program.
I assume that there is a way to print from a browser, or even to an adobe pdf.
For some reason my printers no longer work. I tried reinstalling the printers and drivers but got an error message that the printer spooler was no longer functioning. The Print Spooler no longer shows in my Services. I cannot find it in my Registry. Everything I tried when I googled the problem did not work. How do you reinstall a Print Spooler or fix a corrupted spoolsv.exe file In the registry?
View 5 Replies View RelatedJust starting to use my new windows 8 getting frustrated!! How can I print selected text in a email or web page without printing the complete email or web page?? When I select the text and select devices and printer (Canon Pixma MX512) I don't get the option of 'print selection'
View 2 Replies View RelatedI dont have windows 8. She has a new computer with windows 8 built in. Also has a new printer, an Epson WF2530, multi.
She has installed the printer..but is at a total loss as to how to print something, like when in an email, etc..no PRINT option shows up? She has tried to right click and nothing comes up with printer. Somone mentioned using CONTROL P, but not sure if that worked.
Installed a new laser jet printer and can't print multiple pages. Looked the problem up on other forums and it says to disable mopier mode. I can't find this anywhere. Have looked in printer properties and selected device settings tab and it's not there. Is there a different way of doing this on Windows 8 or am I doing completely the wrong thing to solve this problem.
View 1 Replies View RelatedCompleted some documents on a site and when I WHEN TO PRINT DOCUMENTS, SCREEN TURNED LIGHT BLUE (COULD SEE SCREEN THROUGH blue, but could not activate any of the check boxes. Got message PDF reader required. Using Windows 8 pro, Office 2013, which has a PDF reader,and IE 10,have downloaded and installed Adobe 11. PDF docs sent as an attachment print without any problem.
View 5 Replies View RelatedAfter a restart of the pc, the print spooler doesn't start. I have to start the print spooler manually (services.msc) in order to be able to print.
View 2 Replies View RelatedI recently installed 8.1 on my new Lenovo. I added the HP printer control app; however, when I attempted to print, I got a "printer offline message." Not sure what is happening, because I installed 8.1 on my HP Pavilion and my Home desktop and I am able to print wireless and wired without a problem.
View 2 Replies View RelatedI just tried to print a web page that I had up. Control-P didn't work and when I went to the charms, it told me that I could only print from apps? I'm confused.
View 1 Replies View RelatedSo, have a client who runs Windows 8. Can't print to any of the printers in their office. They have shared / wireless and a couple of USB connected ones. Each one installed /configured indivdually and the test print will queue up but nothing will happen, it just sits there and does nothing
The ONLY thing i could managed to get to print was through bullzip (pdf creator )
check printer spooler
checked permissions on spooler/printers folder
re-installed printers different ways
they all seem to install just fine, but won't print
Computer has been rebooted several times to no avail. I tried different drivers for each.... ??
This is regular workgroup/ not domain.
I cannot print with Win8anymore! I was able to print on my WIFI networked printers previously with this computer.
Other computers on the network can print to them. Upon investigation, I found that the print spoiler ws off. I found the MS directions for restarting the Spooler. I turned it on it shuts itself off when you look at the installed print drivers!
I downloaded my bank statement today and printed same. Print came out pretty small. Normally, on my windows XP pro, when I did this, the print was normal size, if I can say that. Usually it was a "fit-to-page" thing. I couldn't see a way to download the file and make any modifications. Also, in the past I was using Adobe Reader program. Wondering what program windows 8.1 is using and if I need to download and install the Adobe program and somehow set it as the default program.
View 2 Replies View RelatedWhen I try to print pdf files the print dialog box goes away but the print job just disappears. Nothing comes out on the printer. No errors or anything. I have tried different printers on my network. Not sure what's going on.
View 6 Replies View RelatedI have a USB printer connected to an 8.1 system. This printer is shared. I don't like keeping the computer on 24/7 so I set it to sleep.
Is there a way to send a wake command to the system when I want to print? WOL is working on the system. I noticed Homegroup has the option to wake the computer to view shares (and that does work).
If I can't wake the computer before a print job, what is the best practice to conserve energy on a system that is primary used as a print server?