Files Created On Win 7 Data Drive Not Seen On Win 8
Apr 12, 2013
I use an internal data drive for most of my data. In win 8 the drive is E and I've created several folders and populated them with data. I then rebooted my machine to a Win 7 pro system and added a folder and some data to the E drive. No issues.
When I go back to Win 8 i can't see the folder and files I created on the E drive from Win 7.
I haven't gone back to Win 7 yet to see if they are there, but I would be willing to bet that I will see them in Win 7. How do I resolve?
View 6 Replies
ADVERTISEMENT
Mar 19, 2014
I have put together a PC for the first time. It' POSTs and All is well. I have installed a SSD 250G drive as my primary drive with windows 8.1 install. Also have a 1.0 Terbyte Hard Disk for storage. How do I make sure that all data files(downloads, applications, etc) are sent to the hard drive.
View 4 Replies
View Related
Dec 6, 2013
I am trying to get my external hard drives setup from a freshly rebooted installed computer. I recently placed an external hard drive with all my back up files on my computer, but this drive is not going to be my main drive. I have two others I will be using as a main hdd and a backup drive that are brand new.
So, the question is, if I were to use a utility like the Windows 8.1 disk management feature to either delete the drive letter or even change it to another one, will that mess up the external hard drive or even lose data? Because until I transfer my files to my backup disk I am afraid of losing my only copy of my files.
View 3 Replies
View Related
Jul 22, 2013
Because I don't want Flash Player Utilities running at startup I have renamed the 2 files that run at startup:
C:WindowsSystem32MacromeFlashUtil_ActiveX.dll
and
C:WindowsSystem32MacromedFlashUJtil_ActiveX.exe
Somehow they got created again. The ones I renamed are still there but somehow the original files are back in the folder again.
I want this disabled! There are no references to this in any of the 'Run' registry entries and I don't see a Service for this either. How to prevent this annoying piece of garbage from recurring?
View 9 Replies
View Related
Jul 1, 2014
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies
View Related
May 15, 2013
How can I restore my backup data files to Windows 8 that were created using Backup & Restore under Windows 7?
View 8 Replies
View Related
Sep 10, 2013
I've recently got a new laptop with windows 8. I am in the process of trying to upload my cd collection to my computer. Some of my cds are old mix disks that when ripped by windows media player do not have all of the information properly loaded such as artist/album/etc... So I started manually entering the data and renaming the files, this is where the problem comes.
Sporadically the laptop will erase/forget the information I've entered into the song files and will reorganize them into a different folder. It likes to send them to an "unknown artist" folder.I am entering the data by right clicking the file, selecting properties, and in the details tab is where I type everything in.
View 2 Replies
View Related
Oct 17, 2013
I have a laptop that crashed over the weekend. I need to do a restore on the computer but before I do I need to get the documents and pictures off of the drive. I've taken the drive out of the laptop and plugged it into my Windows 7 desktop using an external USB bay. I hear the computer detect the drive but it will never show up as a drive. If I look in Computer Management it shows up in there.
View 2 Replies
View Related
Jun 9, 2014
Have you ever successfully rescued your wanted data back from USB flash drive? In fact, I recently also formatted my USB flash drive mistakenly and all stored data was lost. But, many of these lost files there are still important and useful for me. So, I just wonder whether I can find a way to rescue them all back.
View 2 Replies
View Related
Sep 17, 2013
Both optical drives are shown as working properly in Device Manager, but 70% of the time will not read data DVD disks. That includes data disks burnt using Nero and ISO Joliet format; and either mutli-session or finalized after burning. And disks formatted like a flash drive in UDF format using Windows 8 burning software. And is the same for R or RW +/- disks.
Rebooting sometimes fixes the program, other times not.
I have an Intel mob and CPU but Intel do not support drivers for Windows 8 so all drivers are generic Windows 8. Running driver update from device manager says all drivers are up to date.
I also intermittently, but regularly, get the printer and webcam USB2 drives not detecting these devices. And occasionally the USB3 external hard drives. USB drivers are also up to date.
View 9 Replies
View Related
Sep 27, 2013
I had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?
View 9 Replies
View Related
Aug 6, 2014
I am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)
My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...
View 4 Replies
View Related
Aug 15, 2014
I recently installed some updates on my laptop (running windows 8.1) which required a restart. Upon restarting however I received the following error message: wheauncorrectableerror. I tried to start up in safe mode, but to no avail, I still got the same message. I tried to restore the system to before the update, but that failed. I ran command prompt with chkdsk and it failed stage 3, with the following error: "7 data files processed. Errors detected in the uppercase file." I'm not sure what that means. Is the problem with the hardrive?
View 3 Replies
View Related
Dec 20, 2012
I am dual booting Windows 8 and Win7, using one 500gb hard drive. Win7 has been my main OS, so all of my music, photos, etc. are stored there.
How can I access the user data from my Win7 install , from my Windows 8 install?
Everytime I try to go to it from Windows 8 ---- > My computer it says that I don't have permission to access the files for that user,then attempts to do so for some random period of time, and in the end nothing happens.
View 3 Replies
View Related
Feb 11, 2013
How can I separate my Drive C User Data & Program Files to Drive D.
I was looking into Microsoft folder locations, you can check it out here: [URL] ......
I was wondering how can I apply that during a clean install.
View 7 Replies
View Related
Jun 19, 2014
This PC" my 2nd internal data HDD shows an Optical Drive icon instead of the usual HDD icon.
View 4 Replies
View Related
Nov 11, 2012
I downloaded and directly installed windows 8 on my laptop's E drive, while I already had windows 7 on C drive, on the same HDD.
Now it directly boots to windows 8. How to dual boot windows 7 & windows 8, or any other way to use windows 7 in my laptop without losing my C drive's data.
View 3 Replies
View Related
Jul 29, 2014
I've recently encrypted my main drive, and all is well. However, I would like to be able to encrypt one of my data drives as well and bitlocker isn't even detecting the drive's existence under "Fixed Drives"
I'm on windows 8.1 machine, the encrypted main drive is a SSD drive, and the data drive is a regular WD spinning drive SATA drive. I would like to have the WD data drive encrypted as well...
View 9 Replies
View Related
Sep 13, 2013
As the title states, I'm switching back from Mac to PC. I have all of my precious photos (I love photography in particular) and music stored on an external hard drive (iomega), but it's been formatted for Mac OS. I read that you can't transfer from a Mac OS formatted drive to a PC.
Telling me to reformat the ext. hdd to fat32 isn't going to work, because first of all, that would delete the valuable data, and fat32 only allows the transfer of files less than 4GB.
How I can transfer all of my data on my Mac OS X-formatted external drive to my new Windows PC. It is absolutely essential.
View 3 Replies
View Related
Feb 23, 2014
I have a 1TB backup HDD that is dynamic and full. I have a new HDD that I wish to use to extend this drive.
Is there a way to do this?
View 1 Replies
View Related
Mar 13, 2013
This morning, my laptop wouldn't boot and I got a message saying I needed to use the recovery disk to fix the problem. A little investigating using the command prompt from that disk revealed my system and data partitions had no drive letter assigned to them. A little work with Diskpart fixed that but left me wondering what would have caused them to disappear.
View 1 Replies
View Related
Dec 23, 2013
I had Windows 8 32 bit installed on a WD5000AAJS 500 GB hard drive that died on me. I had a backup of it made using the free version of Paragon Backup & Recovery. Apparently there is something wrong with the disk image so I am unable to recover from it (spent the past week trying everything I can think of or find on the internet to get the image to work). Anyways, there are some files on the hd that I would REALLY like to recover.
I can connect the HD to another PC running Win 7 and it starts to spin (no noise or excessive vibrations). The PC sees the HD as an unallocated drive with 134217728 GB when I look in Computer Management. I read somewhere that this represents the largest possible size for a Win 7 HD (something like that - I'm sure I'm wrong, though). Anyways, I was thinking that since at least the HD spins and the PC can see it, there must be some way to recover the files off of it. There is a MySQL db on there that I would like to recover and some batch and vbscript files I would like to recover.
View 2 Replies
View Related
Oct 30, 2012
When I use Windows Setup.exe and select an ISO file, I get an error message stating An ISO Can't be created/ what is the problem?
View 1 Replies
View Related
Jun 26, 2014
I am unable to create any Home Group as in my PC with win 8.1 pro, I get message that " To create or join a Home group your PC's network location must be set to Private". This I am unable to set as when i tried by going to pc setting-- network-- connection-- wifi connected, there I do not see option of "Find devices and content" to put it on. I do not know how to change PC network location.
View 7 Replies
View Related
Jun 3, 2014
I am looking for site where one can get a log file created and analyzed in the attempt to remove malware.
View 2 Replies
View Related
Apr 3, 2013
Is it true that windows 7 and 8 will automatically create a restore point after 7 days if none were created manually?
I know from experience that previous versions of windows will create a restore point after 24 hrs.
View 2 Replies
View Related
Apr 2, 2014
Before upgrading I had 4 partitions for my UEFI Windows 8 install, the main partition for the system, and the three others it created during install. After upgrading to Windows 8.1 it has reduced the main Windows partition by 472MB and created a new 472MB recovery partition.
I have not yet run any Windows 8.1 updates as the drivers for my laptop are tricky and to make everything work as it should I need to install them before running updates. What I have run is Disk Cleanup, which I had remove the old Windows install.
Is it normal for Windows 8.1 upgrade to create this new recovery partition and is it going to delete it or the old recovery partition and merge it with the main Windows 8.1 partition?
View 5 Replies
View Related
Jul 12, 2013
Prior to last week my computer was running Windows 7, the computer also has a 3TB MyBook external drive on which I ripped over 100 movies from DVD/Blue-Rays that I own (and still have). The reason for doing that was 1) so I could watch the movies on my TV without the hassle of inserting the dvd into the blue-ray player, and (2) reduce the amount of storage space (I threw away the original containers and put them in a simple DVD file).
Last week I installed a new internal hard drive and did a clean install of Windows 8. Consequently my admin account's user name was changed to be the same as my Microsoft live.com account name. Now I can't access any of the folders on MyBook without taking ownership of them one-at-a-time. That is going to be very very time consuming to do that for over 100 folders. Any faster way to accomplish this?
I don't know why Microsoft won't allow computer Administrator to access any folder on his computer. This is just dumb.
The situation gets even worse -- after taking ownership of the folders I still can't access any of the files or sub-folders. I have to do that for every folder and file, somewhere around 500 of them! I feel like just reformatting the drive and starting all over again.
View 1 Replies
View Related
Jul 18, 2013
I have done a lot of searching to find a way to add a photo to my manually created contacts, in the People app in W8.
I have come to the conclusion that, for whatever reason, this is not possible.how to do this
View 2 Replies
View Related
Dec 14, 2013
I have used System Restore in Windows 7 to automatically create restore points, but not so in Windows 8 or 8.1. I configured TASKSCHD.MSC for a restore point to be created at 11 pm weekly, but not dice. I just changed the time to create a SR point daily at 7:15 AM to see if a SR point would be created. In Control Panel, there is not record of the SR point, but Task Scheduler says the 7:15 point was completed successfully. However, I can't find it in Control Panel.
View 2 Replies
View Related
Jan 28, 2014
I have laptop I gave to my nephew to use for a while for He's studying a basic computer course. I created add user account from it yet I do not test the drive D if it is readable, editable, or writeable, all the files I stored there. What I noticed was the Drive C of my personal files is fully isolated by password. So, my question is can I configure my Drive D too to view or read only my files for someone? I don't want to share because some files stored it contains terms and agreement.
View 3 Replies
View Related
