I bought windows 8 online today (download) and I tried installing it. Everything seems to work alright but then when it finally finished installing, I got the Windows 8 style bluescreen, a reboot, then it rolled back to Windows 7 telling me it couldn't install.
I'm trying to Install with keeping all my files/data but it happened a second time.
My compaq CQ58 laptop is currently trying to configure the newest windows update but it is failing and is stuck in a loop from which i cant seem to do :
'failure configuring windows update Reverting changes Do not turn off your computer'
I am using windows 8 and I am connected to the internet, according to my little bar image in the bottom right, but my internet explorer will not load up.
I am using my partners laptop (which is connected to the same wireless network) to respond.
Ever since i upgraded my storage to a Samung 840 SSD windows 8 explorer is failing to work as expected. When i select the computer folder it displays 'The folder is empty'. This happens all the time.
My best guess its SSD compatibility? Firmware is all up to date etc.
My PC has one failing had, I'm totally aware of that Aaand I don't care a bit, ran failingly good for a couple a years.BUT its getting really annoying to constantly have this windows pop-up:
'Please back-up all your data!'
Running win8, Seagate hdd, ~4 years old
I sure disabled smart-hdd, And notifications over hdds in windows notification center
I just bought Dell Inspiron 14, 3421 yesterday and trying to create Disc from Backup and Recovery Software provided by Dell.
I have bought this india and found mulitple post facing the problem what I am facing. I have upgraded Dell Support Center and Also Dell Backup and Recovery using the Update tile. I have windows 8. BIOS A04.
These are the problems I am facing....
Problem1: After writing to Disc1, it does not accept 2nd disc and keep ejecting 2nd disc again and again
Problem2: Even if I insert USB, the software still does not dectect USB.
I am not able to create any backup even after trying 3-4 times.
I have a client running Windows 8.1. The original problem was that he could not install an HP 6700 printer, the installer package failed every time. I got the same error; I attempted to update all his drivers and noticed that all the installers failed. I then attempted to install it manually and I get a failure: Windows found drivers software for your device but encountered an error while attempting to install it. The data is invalid. I receive the same error if I try to install any driver the same way. Laptop is an Acer Aspire One running 8.1, there were no recovery discs made and all recovery options fail. Not sure where to go with this.
I am having issues with Office 365... and frankly I would never sign up for a subscription service, but I got a great deal since I am a student on a multi-year subscription. I don't think my issue is subscription related, but is related to the office products.
I am running Windows 8.1 with all of the high priority updates installed, on my Acer Aspire desktop system with a I3 processor, maxed out memory, an SSD for OS/programs, and the original HDD for most data. The system came with Windows 7, and was upgraded to 8 shortly after I bought it, then 8.1 when it became available. I believe that the Windows 8 was loaded from DVD I burned as part of installing the SSD, and was a clean install. I mention this all in case there is some potential unedrlying issue based on the upgrade path.
I am running Avast (paid version) which runs clean when I scan.
The issue is that every office program I have tried fails almost immediately, when I either open a document, or if I select a document in Windows Explorer.
I have uninstalled Office completely then reinstalled.
Then I uninstalled, removed application's directory, cleaned a couple of registry keys manually, then reinstalled.
I have only installed one app that I can recall since the last time the office products worked for me, and that is Quicken Willmaker 2014. I have printed my will, so I will be uninstalling to see if it matters. Since it worked, I don't recall any Office related updates being downloaded.
Whether or not that program removal solves the issue, I plan to download and try CCleaner...
One other possible issue. It has always been flaky for me, but my IE 11 seems even more finicky than usual... This might be unrelated, or in my head, but I thought I would mention it in case it is relevant. I have not noticed any issues with other applications or functions.
Anything obvious that I am missing or that I should add to my to-do list?
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
As mentioned I have a USB network dongle that I use as a second network card. On my stationary pc it installed the driver automatically when plugged into the USB-port and it works perfectly. When I plug it into my laptop it also installs the driver automatically but.. the driver doesn't work and I have an exclamation mark saying the driver isn't working properly. I have tried reinstalling the driver countless times - no luck.
Both machines run the same version of Windows 8. What can I do?
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
My friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
I want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I updated one laptop with one promo code bought etc and all fine. Came to do the same with another pc but after i inserted the promo code and clicked to submit the payment the screen froze at that point and wouldn't go any further.
Have received an email from Paypal to tell me the payment has been processed but obviously when i try to re-install it etc it's asking me for a promo code and to pay again... i can't carry on from where i left off !! what i can do now?
This is all done via the online offer and Windows Upgrade Offer using the downloaded Upgrade Assistant.