My compaq CQ58 laptop is currently trying to configure the newest windows update but it is failing and is stuck in a loop from which i cant seem to do :
'failure configuring windows update Reverting changes Do not turn off your computer'
My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.
This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".
Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't worked (it actually caused the issue). Running Windows 8 on Dell Inspiron 3520.
I'm guessing full format needed? - Would a format resolve the issue, since a 'refresh' caused it?
I bought windows 8 online today (download) and I tried installing it. Everything seems to work alright but then when it finally finished installing, I got the Windows 8 style bluescreen, a reboot, then it rolled back to Windows 7 telling me it couldn't install.
I'm trying to Install with keeping all my files/data but it happened a second time.
I am using windows 8 and I am connected to the internet, according to my little bar image in the bottom right, but my internet explorer will not load up.
I am using my partners laptop (which is connected to the same wireless network) to respond.
Ever since i upgraded my storage to a Samung 840 SSD windows 8 explorer is failing to work as expected. When i select the computer folder it displays 'The folder is empty'. This happens all the time.
My best guess its SSD compatibility? Firmware is all up to date etc.
My PC has one failing had, I'm totally aware of that Aaand I don't care a bit, ran failingly good for a couple a years.BUT its getting really annoying to constantly have this windows pop-up:
'Please back-up all your data!'
Running win8, Seagate hdd, ~4 years old
I sure disabled smart-hdd, And notifications over hdds in windows notification center
WINDOWS 8 PRO. I am trying to do normal updates and I can download them. When i do the restart I get FAILIURe TO CONFIGURe UPDATES. I believe i deleted something but nothing in trash. SYSTEM RESTORE IS my friend but i can't go back pass the 10th of this month...different problem.
View 9 Replies View RelatedSo when I install update 2903939 it installs fine but upon reboot it goes to 7%, reboots, reboots again as soon as the background color for the login screen shows, and then says windows was unable to update.
So far I have tried:
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
SFC /scannow
Restart background intelligence service
Remove extra USB devices
Disable antivirus ( I don't have one except for bitdefender)
Renaming distribution folder in %systemroot% to .old
SFC said something couldn't be repaired and I don't really understand the log. DISM said it repaired a store component or something. I am very lost on where to go next. I cannot seem to upload the CBS.log as a .txt I get an internal error.
He says the last thing the computer did was a windows updated and the day after did not start, when i start it so comes the logo forward "VI10" and a loading circle below for a 1min or 2. then you hear the fan is increasing and it is reading something, then it jumps to a black screen for 1-2 minutes then comes "Preparing to configure Windows".
I let it stand for six hours before I turned it off and start looking try start it in safe mode, have used boot setup before on XP and W7 so know how it looks / works but I can not access it anywhere, I read somewhere you could force it with F8 but do not work .
Also try to bot with cd = same shit
it is a :: Sony VA10
Intel inside Core i5
Model: SVE151J13M
Windows 8
I just bought Dell Inspiron 14, 3421 yesterday and trying to create Disc from Backup and Recovery Software provided by Dell.
I have bought this india and found mulitple post facing the problem what I am facing. I have upgraded Dell Support Center and Also Dell Backup and Recovery using the Update tile. I have windows 8. BIOS A04.
These are the problems I am facing....
Problem1: After writing to Disc1, it does not accept 2nd disc and keep ejecting 2nd disc again and again
Problem2: Even if I insert USB, the software still does not dectect USB.
I am not able to create any backup even after trying 3-4 times.
I have a client running Windows 8.1. The original problem was that he could not install an HP 6700 printer, the installer package failed every time. I got the same error; I attempted to update all his drivers and noticed that all the installers failed. I then attempted to install it manually and I get a failure: Windows found drivers software for your device but encountered an error while attempting to install it. The data is invalid. I receive the same error if I try to install any driver the same way. Laptop is an Acer Aspire One running 8.1, there were no recovery discs made and all recovery options fail. Not sure where to go with this.
View 1 Replies View Relatedhow to configure Firefox to 'land' bookmarks to the toolbar by default instead of having to click on the Folder drop down menu to choose?
View 9 Replies View RelatedI have a problem with notification setting, applications to configure are missing.
View 2 Replies View RelatedI have several printers at work all hooked up to a samba share so that the whole office can use them. We have Konica Minolta, HP and Lexmarks predominantly but some other brands as well like Kyocera.
I have a fresh Win 8.1 Pro install and i have installed the printer drivers via the Windows update mechanism for all the printers. Some i've added via the samba share some via direct ip connection.
For whatever reason i cannot add/delete or config any of the printer ports as seen in the attached screen cap. I've even tried the windows Administrator account to no avail. UAC is off and i have admin rights to the pc.
I have sought support on freenode's #windows channel and googled the hell out of this topic, to avail.
I cannot replicate the issue in Win 7.
Where in control panel do I configure what apps @ startup?
View 6 Replies View RelatedI am having issues with Office 365... and frankly I would never sign up for a subscription service, but I got a great deal since I am a student on a multi-year subscription. I don't think my issue is subscription related, but is related to the office products.
I am running Windows 8.1 with all of the high priority updates installed, on my Acer Aspire desktop system with a I3 processor, maxed out memory, an SSD for OS/programs, and the original HDD for most data. The system came with Windows 7, and was upgraded to 8 shortly after I bought it, then 8.1 when it became available. I believe that the Windows 8 was loaded from DVD I burned as part of installing the SSD, and was a clean install. I mention this all in case there is some potential unedrlying issue based on the upgrade path.
I am running Avast (paid version) which runs clean when I scan.
The issue is that every office program I have tried fails almost immediately, when I either open a document, or if I select a document in Windows Explorer.
I have uninstalled Office completely then reinstalled.
Then I uninstalled, removed application's directory, cleaned a couple of registry keys manually, then reinstalled.
I have only installed one app that I can recall since the last time the office products worked for me, and that is Quicken Willmaker 2014. I have printed my will, so I will be uninstalling to see if it matters. Since it worked, I don't recall any Office related updates being downloaded.
Whether or not that program removal solves the issue, I plan to download and try CCleaner...
One other possible issue. It has always been flaky for me, but my IE 11 seems even more finicky than usual... This might be unrelated, or in my head, but I thought I would mention it in case it is relevant. I have not noticed any issues with other applications or functions.
Anything obvious that I am missing or that I should add to my to-do list?
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies View RelatedOutlook 2013 won't set up an email account if the TEST SEND EMAIL fails.
This is a really strange error -- if you are in some places often your ISP won't let you logon to your email server to SEND email from programs like OUTLOOK (SPAM protection amongst other things) but insist that you use their webmail unless you are actually LOGGED ON to the ISP.
ISP's have no problem with you READING Email while on say a public / other Wi-Fi system but often restrict the SENDING of emails through their servers from such Wi-Fi accesses - you often have to be logged on to your own ISP.
So if you are trying to set up the account while you are staying in a Hotel and using their broadband service it fails -- all I want is to be able to READ email until I can logon at home.
I can SEND via webmail or mobile phone so the stupid install process shouldn't stop me CREATING an account even if for the moment I can't use it for SENDING.
Rolled back to Office 2010 -- Outlook 2010 works fine - you can SKIP the test email send --this is what they should allow on Outlook 2013 as well. !!!!!
new build win 8.1 I am trying to configure an HP printer driver to digitally scan to a specific folder on a hard drive it says "the device needs to authenticate itself on the network before it can save to a network folder" then asks for my user name and password (not the wireless router name and password) direct Ethernet connection from main computer to router I have tried many variations without success how do I figure out my network computer and user name: in net speak ? e.g. ????????username ?? the Microsoft account adds a whole new level of complexity and woe is my user password my pin number or is it my MS account password or something else is my user name "Robert" as listed in windowsusers folder or is it some variation of in "netspeak" my new build screams but I am undergoing the usual trials of a new clean install (Win 8.1)
View 6 Replies View RelatedToday, I installed Linux Mint 13 to try some appliactions, programs and other good things.I downloaded it normally and after installing it I don't have network connection.
I tried with all type of network switches and activated Legacy Network Adapter but it don't work (I configured in network adapter for ex. External Network 1 , I want to say it's not say : Not Connected in VM Settings).
When I turn it Linux Mint says : Disconnected - you are now offline.
How to configure network and the Internet to work with Linux Mint VM ?
As mentioned I have a USB network dongle that I use as a second network card. On my stationary pc it installed the driver automatically when plugged into the USB-port and it works perfectly. When I plug it into my laptop it also installs the driver automatically but.. the driver doesn't work and I have an exclamation mark saying the driver isn't working properly. I have tried reinstalling the driver countless times - no luck.
Both machines run the same version of Windows 8. What can I do?
EDIT: It's a Bluetooth device.
So I restored my system because I had no other choice from it not booting before and it was working for a day, then when I restarted it said 'installing XX / 93 updates' so I let that run, and when It finally finished, it restarted said 'configuring windows updates XX% complete...' and then it suddenly said "Failed to configure updates. Reverting Changes." and then it looped this by restarting, trying to configure them, and then saying "Failed to configure updates. Reverting Changes." again...
I've got back into safe mode, what should I do to make it update properly again?
Someone suggested toggling "Secure Boot" in the BIOS, is that worth a try?
I am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.
Is there a site where updates can be downloaded according to their KB numbers then installed manually?
I don't know how to get the update, I'm checking updates with Windows Update, but no update found...
how to get it?
I have Windows 8.1 RTM installed on my computer. Some days ago, Microsoft released the GA updates for the system. Windows update downloaded them, but they failed to install... I've downloaded the updates manually and applied them in the correct order... But no luck, the updates fail to install...
Here's a photo of the updates... (in Spanish)
i used to use windows 8.1 for about a year and it was running well but lately my laptop became slow i used refresh PC and now i use windows 8 the problem here is that ican't upgrade to 8.1 unless i install all previous updates when i try to download them via windows update it just stucks at 0% i tried many times and tried windows update diagnostic and this was the result but still no response it's 0%
View 5 Replies View RelatedI purchased a Windows 8 Pro licence through a classified advert on another forum in Sept 2013 and now since Windows XP is no longer supported I decided to update my OS. I thought I got a good deal on the licence and when I went to try download an official Windows 8 file I couldn't. I contacted Microsoft who informed me my licence is a valid Windows 8 Pro VL licence. They were unable to provide me with a physical ISO to download from and told me to ask the person I purchased it from... who of course has since disappeared.
So I downloaded the Windows 8 Pro x64 ISO from MSDN, installed great, product activated perfectly, my old pc is running and booting fast and I actually like it. However when I try to update the scroll bar just constantly scrolls left to right and the progress bar shown at 0%.
I have googled, and deleted the folder called the DOWNLOAD folder in SoftwareDistribution following advice online, however this still does not fix the problem. Occassionally I have got the files to download after the 0% progress says different, and when it comes to install these update files, nothing happens.
Is it because I downloaded a dodgy OS version from MSDN? it is the 915417.iso that I used.
Also can I update to Windows 8.1? When I installed the first few times I tried to update through the Windows Store. it said I require updates. Some files might have updated, I did a "shut down and update" option once and since that the option of installing Windows 8.1 has disappeared.
My Windows 8 Update didn't install yesterday & now seems stuck on 'preparing to install',
maybe the same problem it had when trying the free update to 8.1 that didn't work,
I have a fresh install of Windows 8 Pro on a new PC and have done for some weeks. On Friday i hit the shutdown option Update and Restart. On the Saturday (yesterday) I turned on my machine to greeted with the Windows 8 Logo then a blank screen and doesn't boot at all into Windows (And not i have checked both monitors and they connected fine.
What was i doing just BEFORE "Update and Restart".......
1. Enabled UEFI on the BIOS
2. Installed the Hyper-V Windows 8 Features
3. Created and installed a Virtual Switch
4. Created and installed a Virtual Machine and installed Windows 8.
5. Onto the VM i installed Visual Studio 2012 Web (MVC4) and SQL Server Express 2012 (NOT LocalDb)
Then after than i ran the Windows Update on the main PC and pressed "Update and Restart".
What have I tried doing to resolve this issue?
Booted (F12) using the OEM Disc. I have then Repair your computer->Troubleshoot....
1.1 Advanced Options
1.2 Automatic Repair
1.3 This fails and I get the following error:
[URL] ....
then i tried....
2.1 Refresh PC
2.2 I get the following error:
"The Drive where Windows is installed is locked. Unlock the drive and try again"
then i tried....
3.1 Reset PC
3.2 I get the following error:
"Unable to reset your PC. A required drive partition is missing"
then i tried....
4.1 System Restore
4.2 This fails and i get the following error:
[URL] ....
So I'm completely at a loss. I presume if I unlock the primary disk I should be able to boot or at least repair? Anyway i really don't want to wipe and uninstall if possible.
I want to burn windows 8.1 update iso to dvd. I don't know which program to use .. Also what should be the write speed.
View 9 Replies View RelatedI am currently running a pc with Windows 8 Pro activated by KMSPico. Will/should the Win 8.1 update install/work ok on my system when it becomes available?
View 3 Replies View Related