Updates :: Failed To Configure Updates / Reverting Changes Loop
Jul 15, 2014
So I restored my system because I had no other choice from it not booting before and it was working for a day, then when I restarted it said 'installing XX / 93 updates' so I let that run, and when It finally finished, it restarted said 'configuring windows updates XX% complete...' and then it suddenly said "Failed to configure updates. Reverting Changes." and then it looped this by restarting, trying to configure them, and then saying "Failed to configure updates. Reverting Changes." again...
I've got back into safe mode, what should I do to make it update properly again?
Someone suggested toggling "Secure Boot" in the BIOS, is that worth a try?
He says the last thing the computer did was a windows updated and the day after did not start, when i start it so comes the logo forward "VI10" and a loading circle below for a 1min or 2. then you hear the fan is increasing and it is reading something, then it jumps to a black screen for 1-2 minutes then comes "Preparing to configure Windows".
I let it stand for six hours before I turned it off and start looking try start it in safe mode, have used boot setup before on XP and W7 so know how it looks / works but I can not access it anywhere, I read somewhere you could force it with F8 but do not work .
Also try to bot with cd = same shit
it is a :: Sony VA10 Intel inside Core i5 Model: SVE151J13M Windows 8
I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop.
PC got recovered on Tuesday, so had no updates on it. Installed and restarted the PC today, it installed so many percent and restarted. It then carried on installing them.
It the said that the updates had failed and that it was reverting and not restart the PC. It was stuck like that for an hour. So I restarted it and tried to get into safe mode using F8/Shift-F8, but it doesn't work goes back to the reverting updates screen. I have tried numerous times and Windows Recovery won't appear either.
I don't have a Windows disc. It is a Compaq PC and I can't lose any of the files.
I just purchased this Laptop yesterday, was installing programs and updates. The updates finished installing, asked me to restart the PC which I didn't do right away because I was installing programs. One of the programs asked me to reboot into safe mode so I did. When the PC rebooted, it said the updates were installed 100% but then says SOMETHING ALONG THE LINES OF "Updates failed...reverting changes". This loop as been going on for hours now.
I have had success in getting into the BIOS by pressing F12 upon startup. I tried changing the boot order to boot from my bootable startup repair DVD but it didn't work!
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
I am currently having an issue on my laptop at the moment where it's stuck in an infinite loop of 'reverting changes' after having tried to update and failed at 30%, I have done some reading at ways to boot into safe mode however it would appear windows 8 doesn't give me the chance.
I do not have a copy of my original windows 8 disc and am at a loss!
I have tried spamming F4, F8, F10 buttons and none are allowing me to enter boot mode.
I just bought new Asus Vivotab Smart Windows 8 tablet, after the very first windows update it failed to install some of the updates, and then after the reboot I am now stuck with the message "Failure configuring Windows updates, reverting changes".
It never gets any further than this, it never reverts, I have left it running for an entire day and have restarted several times.
This is a tablet, so there is no keyboard so I cannot press any F keys to get into recovery mode, and no CD to boot from etc.
WINDOWS 8 PRO. I am trying to do normal updates and I can download them. When i do the restart I get FAILIURe TO CONFIGURe UPDATES. I believe i deleted something but nothing in trash. SYSTEM RESTORE IS my friend but i can't go back pass the 10th of this month...different problem.
I recently bought a new ASUS computer, after I set it up a notification popped up asking me to update to windows 8.1
I proceeded to do this and it started to download the updates, when I returned it said "failure configuring windows, reverting changes" its been like this for the past 5+ hours, what should I do?
So when I install update 2903939 it installs fine but upon reboot it goes to 7%, reboots, reboots again as soon as the background color for the login screen shows, and then says windows was unable to update.
So far I have tried: DISM.exe /Online /Cleanup-image /Scanhealth DISM.exe /Online /Cleanup-image /Restorehealth SFC /scannow Restart background intelligence service Remove extra USB devices Disable antivirus ( I don't have one except for bitdefender) Renaming distribution folder in %systemroot% to .old
SFC said something couldn't be repaired and I don't really understand the log. DISM said it repaired a store component or something. I am very lost on where to go next. I cannot seem to upload the CBS.log as a .txt I get an internal error.
My new HP ultrabook was doing updates ... And it came up with the screen saying Failure installing updates reverting changes do not power off however its been saying this for 4 hours and i can not get out of this i even attempted to power it off and upon powering it on it comes straight back to this screen!
My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.
This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".
Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't worked (it actually caused the issue). Running Windows 8 on Dell Inspiron 3520.
I'm guessing full format needed? - Would a format resolve the issue, since a 'refresh' caused it?
So, since yesterday, Windows 8.1 tries to boot, then gets halfway through, shows a sad face for a second, and then restarts. It does this again and again. Just get the message "Failure configuring Windows updates. Undoing changes. Don't turn off your computer" then "Configuring Windows updates, 30% complete. Don't turn off your computer".
Then it boots, does the same thing again.
I've tried booting from the install media, but Refresh doesn't work, nor restarting in safe mode. Weirdly, pressing F2 to load BIOS, which always used to work, no longer does, it just continues trying to load Windows.
I've got an oldish PC, around 4/5 years old, with Windows 8 installed. Its got a fairly decent processor (at the time), a Q9550. Intel DP43TF motherboard.
I have two PCs..a Dell desktop and a Sony laptop(Purchased last June) yesterday I received the windows 8.1 updates so I installed them on my Dell desktop, no problems, it installed it and shut down the PC just fine and I am on it right now..but with the Sony laptop its nothing but problems..I installed the updates, it reboots just fine, but when I try shutting down the laptop it just goes back to a loop like it keeps on booting up then crashes then I have to restore it to August 9th and then it shuts down fine..so I am not sure what is going on..is there a particular update that is causing this I wont install it I just cant figure it out and I have done the system restore 3 times already..it will say I have 32 updates to install(including 1 optional one) so I just installed 30 of them to see if it would work and then I shut down the computer and same issue so something Im installing is causing this problem
I initially had a different processor and motherboard, but after changing both of those due to failures, everything is now working fine, until I do a restart. The main restart issue is that it gets stuck in an automatic repair loop until I can get to Safe Mode and then restarting from there somehow undoes the updates from Windows Update. If I keep those updates off, though, and just try to do a general restart, I get a BSOD Watchdog error. I'll include that log, just in case. It'll be in CBS.zip since I'm including the whole CBS folder from WindowsLogs. I'm really not sure what's wrong here.
I saw that there were updates to be installed and I had to restart my computer, so I did that, and when it turned back on, I got the error message 'your pc ran into a problem and needs to restart. We are just collecting some error info, and then we'll restart for you'and it stayed there for less than a second and went straight to a black screen where it doesn't do anything and basically forces me to manually press the power button to shut it down. It has been doing this in a loop for 5+ times, and I don't know what to do.
This is a laptop and I do not have a Windows 8 installation disk. I have tried looking at every other thread from every place I could find and could not find one that didn't talk about using an installation disk, something I don't have!
I had windows 8 pro+wmc installed in my Lenovo laptop (actually an upgrade from windows 7 OEM, upgraded to windows 8 by Lenovo maintenance team when there was some trouble with the hdd!); later I got it activated successfully (phone activation); I have the activation detailes and also copied the sacrosanct windows/system32/spp/store folder for future reactivation.
This laptop had winxp and Linux installed as first and second partitions and the third partition was the windows8; the boot manager was grub; yesterday I found that the freeupdate for windows 8.1 is now back in the store; so I thought of increasing the size and backing up the existing windows8 image in case of any problem; so I deleted the Linux snd xp partitions totally and edited the bcd (using bootice) so that the machine boots correctly; so now the first partition is a large data partition where I intended to copy the windows 8 which is now in partition 2;
When I rebooted the machine today, I got the activation error message! since I have the product key, product id and also the activation code, I thought I can copy the store folder or worst come, I can redo the phone activation; I first copied the store folder as generally suggested by the "activation backup procedure; ' when I restarted the machine, it was a no-go as the activation error is persisting;
I attempted phone activation, the key was first accepted and when the product id (the nine fields) was generated, I found it was different from the one I have copied earlier; still I entered all the fields properly and then after playing music for sometime before generating the activation code, the message came "your request cannot be processed now"; I again tried after an hour I got the message saying the key is blocked!
I have an HP 2000 Notebook that I recently did a reinstall of Windows 8 from my recovery drive due to what seemed like huge amounts of background activity and the systems constant failure at keeping track of my folders and files. So off I went for round two. First to make it to the top of my "what is annoying me the most about this OS" list was the fact that I had to wait four hours for windows to retrieve 115 updates then another near four hours for windows to Configure 115 updates which was not too surprising but THEN, windows gets to update number 114 and decides that it's just too much trouble to configure updates built for itself by the very people who created IT and FAILS the entire process!
The message I get is that because it failed, It is now going to revert the system back to it's original state before the updates which took another couple of hours! So an entire day of being without the use of my laptop and all for nothing!
Now, the most recent issue is the fact that there are so darn many windows background processes going at any given time that it is affecting performance. I actually noticed in task manager a windows host app holding over 10 child processes that were consuming over 300MB of memory! My question is, how many of these background memory hogs do I really need?
I have a lenovo windows 8 laptop which is having trouble updating and goes to reverting back. Recently its been stuck on that screen for a long time. I did reset it but it goes to the same screen...
I have (also according to Windows Control Panel > Installed Updates) successfully installed KB2919355 on 13th Apr 2014. So to me, the KB2919355 is in place (and various KB installations after that, too) <- I do get all the Windows System updates (including security updates) BUT not Windows Store application updates.
So the problem is the "Windows Store failed to sync machine licenses. Result code 0x80070490" which pops into Windows Event log on daily basis.
TEMPORARILY fix: running Windows update troubleshooter fixes the problem (it stops and restarts BITS and Cryptographic services) and after a while I get a notification to the Windows Store Tile that there are new updates (if any). BUT after rebooting Windows the problem (Windows Store failed to sync machine licenses. Result code 0x80070490) always re-appears in the Event logs.
Here is the report of successful Windows update troubleshooter.
Also:
1) running DISM does not work (see below)
2) Going to Store settings and "Sync licenses" does not work
Dism /Online /Cleanup-Image /RestoreHealth -> [==========================100.0%==========================] The restore operation failed. Either the repair source was not found or the comp onent store cannot be repaired. Error: 0x800f081f DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:WINDOWSLogsDISMdism.log
After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
I have had to system restore 3 or 4 times in the last week or so as Windows 8 refuses to boot after installing the latest updates discovered from the last couple of weeks (though some are from December 2012)
I have unchecked all the current updates and have decided against installing them as they seem to be preventing Windows from booting.
Pattern - "Restart to install updates"
Restart locks on the start screen - Restart again and locks again (repeat this process 3x)
"Windows is automatically repairing..." - Fails
"Windows must restore settings to a previous time..." - Usually succeeds, sometimes fails.
Then I can get back into Windows.
As soon as I install these updates, I won't get back into Windows until I system restore since before the updates and my build won't remain stable unless I prevent Windows from installing these updates.What could be going on?
They are quite big updates (totalling ~740mb and have all been discovered in the last week or so though some date back to late last year)
My laptop started installing updates when I powered down for four hours I have had this message on the screen - keep your PC plugged in until this is done. Installing update 17 of 24.....
How long do I leave this or can I power off and try and restart?
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
After I installed Windows 8 I started having the "0 KB Total, 0% Downloaded" issue while attempting to update, sometimes it does work, but most of the time it doesn't
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
So some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
