Virtualization :: Getting Two Server To Communicate On HyperV With One Nic
Jan 15, 2013
I have two servers installed via HyperV, one is Server 2008 R2 and the other is Server 2012. I want to get them to communicate with eachother but I only have 1 nic onboard. I've setup an external virtual switch and have internet connection with my host OS and both servers (same connection) but I don't know what steps I need to take next to get them to talk to eachother and share resources. I also plan on making a few more VM's (Ubuntu/Fedora) and want to make them to talk to eachother as well (which will be a later question )
I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.
After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly. When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.
But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.
All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them. Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.
I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
I can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
I have activated Hyper-V on my Windows 8 Pro computer. I have a vhd file created by VirtualBox and another from Microsofts WindowsXPMode_en-us.vhd. Being 100% new to Hyper-V, I am not sure if I am doing this correctly.
I have gone to the Hyper-V Manager, selected Import Virtual Machine. I select the proper directory and then I get the message, "Hyper-V did not find virtual machines...". I am running as administrator.
I've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
How to install Hyper-V Manager on Windows 8.1? I can't find anything to say it isn't possible, but I also can't find any way to install it. Anything I have been able to find refers only to installing it in Windows 8.1 Pro, but says the host software requires Pro or Enterprise. However, since I am not installing the host, it looks like it is possible, if you can find the source.
The reason I need to do this is that I have a Windows 8.1 machine and a Windows Hyper-V Server 2012 R2 Core machine, and I would like to be able to access the GUI tools for Hyper-V Manager. This is so I can directly access and see the machines I am running. Right now, I have a machine, but I have no way of accessing it.
I am running Windows 8.1 Pro with Hyper-V enabled. When I had Windows 8 I could install a Virtual switch with out any problems, since upgrading I can not install a Virtual Switch with External or Internal settings.
Not sure if this is relevant or not but when I look at the Ethernet properties never "Hyper-V Extensible Virtual Switch" or "Microsoft Network Adapter Multiplexor Protocol" are ticked. I have tried ticking them but get the error message "Could not add the requested feature. The error is: The data is invalid". I have checked that I am using the latest and correct driver for the card.
Upgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
I am trying to load a developed application on windows phone 8.0 emulator but whenever I try run/test using visual studio i got error shown in the image
I am a newbie in windows phone development .... Troubleshooting the Windows Phone 8 Emulator .... but still its same ....
I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image).
Today, I installed Linux Mint 13 to try some appliactions, programs and other good things.I downloaded it normally and after installing it I don't have network connection.
I tried with all type of network switches and activated Legacy Network Adapter but it don't work (I configured in network adapter for ex. External Network 1 , I want to say it's not say : Not Connected in VM Settings).
When I turn it Linux Mint says : Disconnected - you are now offline.
How to configure network and the Internet to work with Linux Mint VM ?
I have downloaded some basic games like Solitaire, Mah Jong, and Freecell. Every time I run them, the app tries to communicate with my Xbox. It just happens that I don't own an Xbox. Is there any way I can configure the games so they don't try this rather futile communication?
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)
I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (Windows 8 Enterprise) both enabled "Shareable and Visible".
View from W2003 -- can see and access disks C,D, and F on Windows 8 Computer
View from Windows 8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but Windows 8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't work at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of support ever.
I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.
Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.
I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.
(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !!)
Note -- Other W7 / Linux / XP computers connected to this SAME LAN (currently switched off) have NO problem accessing the server -- It's just this Windows 8 Machine (Windows 8 x-64 Enterprise version).
Any way to update the HyperV Client within Win8 Pro to Server 2012 standard of features?Primarily I'd like to use a Win8 client machine to host a VM with RemoteFX (DX11 GPU) support to another client machine, within a small office environment.
Actually I've just looked up the possible answer for this here: [URL] ....
Unfortunately it seems that Win8 Pro and below does not support the hosting of this feature. Any way to bypass this limitation?
I have a sony vaio core i7, 8 gb ram windows 8 pro with hyper-v for windows 8 installed and working. my issue is that all my vms come up fine but after about 10 minutes of inactivity they automatically shut down. I have set all my power options in both the vm and my host as never on all the sleep options, still the problem persists. I need these vms to stay up.
Am testing out a version of windows 8 in client hyper-v. I want to give it internet access so that I can active it(am actually testing the activation process). I want the virtual machine to use my dial up connection. How do I do this.
I changed KMS server in my Windows 8.1 PC using this command:
[CODE][slmgr /skms testingkms.com:1688/CODE]
I was doing some experiment. Then I realize it is not MAK. It's just Pro Retail. Now I don't know how to set back to default KMS. And I'm getting this error all the time: check attached screenshot.
Ok so here is some info I have Internet from storm Internet it's a radio dish Ethernet go's to the power over Ethernet device then into my extreme gigabit router , see storm had to come out and move the dish for 20 percent better signal and it was working fine for a day I was getting 6mbps easy, then was on Xbox when out of nowhere it gos out... SO I power cycle.
The poe device and usually it comes back up but it didn't and the computer said the dns server isn't responding..... So I did the ip configuration thing and cleared / renew. Then tried power cycling the router still nothing it should be working...
recently my tiles like the Windows 8 Store, Kindle Reader and Xbox One Smartglass won't connect to the internet. I did some research and found that it was because the "Use a proxy server for LAN" keeps checking itself. Once I un-check this they work, but not long after that box automatically checks itself again.
Microsoft uses a display server? I assume it does but I am doing a presentation on display servers and I found a ton of information on Linux and OS X display servers but I cannot find anything on the display server Windows uses.
Today, my internet connection at home encountered a problem. I can connect to the WiFi but no internet access. Usually there's a yellow exclamation mark, but this one is fine, full signal but no internet access. Same thing goes to my iPod, can connect to the WiFi but no internet access.
To my surprise, all my sister's laptop and her Apple devices also the same thing, can connect but no access. I wonder what could be the problem. I use the troubleshoot on my laptop and it says "The DNS server is not responding" and it states that it can't be fix. I already restart my router but still same thing. Right now I'm using my phone's hotspot to connect to the internet and post this here.
Got a custom build server - Gigabyte H87M-D3H, i5-4570, 16GB RAM. It's now running 2012 R2, but it was running 2012 initially and had exactly the same problems, which suggests hardware issues.
Nearly every night, during the night sometime, the server crashes off, and needs to be started again with the power button.
I first suspected a power issue because nothing shows in the event log.But after connecting it to a UPS and replacing the power supply (with a Corsair CX430), the issues continue.
I also get the odd BSOD - dump attached.
I've checked the following:
- Checked, rechecked and replaced all sata cables - Scanned/chkdsk all HDDs - Memtest for a few hours - sfc /scannow - UPS and new PSU as mentioned above
