I've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
View 9 Replies
After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly. When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.
But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.
All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them. Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.
Today, I installed Linux Mint 13 to try some appliactions, programs and other good things.I downloaded it normally and after installing it I don't have network connection.
I tried with all type of network switches and activated Legacy Network Adapter but it don't work (I configured in network adapter for ex. External Network 1 , I want to say it's not say : Not Connected in VM Settings).
When I turn it Linux Mint says : Disconnected - you are now offline.
How to configure network and the Internet to work with Linux Mint VM ?
Okay I have created a virtual drive, switch and then created a new virtual machine.
I have downloaded a windows 98 iso (legally, I have a disk but its badly scratched).
I'm trying to install win98 on the VM but not sure how. I had the option when I was playing around with the first time and chose install later.
I deleted the VM and drive, created new ones but didn't get the option to install an OS.
If I start the vm I just get boot failure. I have mounted the win 98 iso in the virtual cd drive but nothing's happening!
I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
I have two servers installed via HyperV, one is Server 2008 R2 and the other is Server 2012. I want to get them to communicate with eachother but I only have 1 nic onboard. I've setup an external virtual switch and have internet connection with my host OS and both servers (same connection) but I don't know what steps I need to take next to get them to talk to eachother and share resources. I also plan on making a few more VM's (Ubuntu/Fedora) and want to make them to talk to eachother as well (which will be a later question )
View 1 Replies View RelatedI can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
View 3 Replies View RelatedI have activated Hyper-V on my Windows 8 Pro computer. I have a vhd file created by VirtualBox and another from Microsofts WindowsXPMode_en-us.vhd. Being 100% new to Hyper-V, I am not sure if I am doing this correctly.
I have gone to the Hyper-V Manager, selected Import Virtual Machine. I select the proper directory and then I get the message, "Hyper-V did not find virtual machines...". I am running as administrator.
I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.
View 2 Replies View RelatedWhat is the difference between the version of hyper-v available in
1:- Windows 8 and windows server 2012.
2:- Windows 8.1 and windows server 2012 r2.
And what is the version of hyper-v in each os version.
How to install Hyper-V Manager on Windows 8.1? I can't find anything to say it isn't possible, but I also can't find any way to install it. Anything I have been able to find refers only to installing it in Windows 8.1 Pro, but says the host software requires Pro or Enterprise. However, since I am not installing the host, it looks like it is possible, if you can find the source.
The reason I need to do this is that I have a Windows 8.1 machine and a Windows Hyper-V Server 2012 R2 Core machine, and I would like to be able to access the GUI tools for Hyper-V Manager. This is so I can directly access and see the machines I am running. Right now, I have a machine, but I have no way of accessing it.
I am running Windows 8.1 Pro with Hyper-V enabled. When I had Windows 8 I could install a Virtual switch with out any problems, since upgrading I can not install a Virtual Switch with External or Internal settings.
Not sure if this is relevant or not but when I look at the Ethernet properties never "Hyper-V Extensible Virtual Switch" or "Microsoft Network Adapter Multiplexor Protocol" are ticked. I have tried ticking them but get the error message "Could not add the requested feature. The error is: The data is invalid". I have checked that I am using the latest and correct driver for the card.
hyper-v - error in creating external virtual switch
I got an error in creating external virtual switch at hyper-v on windows 8 pro x64.
I have one xp vm and tried to make an network connection, but I coul not success.
How to make creating external virtual switch at hyper-v.
I enabled Hyper-V on my computer. When it restared I saw it was configuring Hyper-V. I didn't opened Hyper-V the same day. Two days later, I wont to open Hyper-V but I can't find it anywhere! Also, it isn't listed in programs anymore... I also enabled virtualisation in the BIOS.
View 1 Replies View RelatedUpgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
I am trying to load a developed application on windows phone 8.0 emulator but whenever I try run/test using visual studio i got error shown in the image
I am a newbie in windows phone development .... Troubleshooting the Windows Phone 8 Emulator .... but still its same ....
I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image).
View 9 Replies View RelatedAm testing out a version of windows 8 in client hyper-v. I want to give it internet access so that I can active it(am actually testing the activation process). I want the virtual machine to use my dial up connection. How do I do this.
View 1 Replies View RelatedI connected my pc to the internet and after 10 secs it shows BSOD with bad pool caller.
View 2 Replies View RelatedI'm getting the below BSOD when connecting and using the internet at my new apartment after few minutes (usually after 10mins but sometimes less or more than that). This is not happening at my work or when using any other wireless networks.
DRIVER_IRQL_NOT_LESS_OR_EQUAL (wfplwfs.sys)
I'm not sure if it matters but the connection at my apartment is kind of weird... I just followed the instructions to connect to a wireless network first and then setup another broadband PPPoE connection.
Please see attached SFdebugFiles.
Surface Pro 2 stock with Windows 8 Pro OS
I face this BSOD on my windows 8.1. Please read the dmp.file
View 3 Replies View Relatedwhen I connect my USB 3g to windows 8, google chrome, ie, idm ..... all applications running but the metro interface does not work, it shows me a message that I'm offline and I need to connect to the internet for my email sync, for example the problem is that it works for all the other software but not metro interface
knowing that I have the final version of Windows 8 pro
recently my PC updated when I didn't want it to and now it installed the update 1 "patch" for 8.1 and now my internet driver is screwed up. I tried to remove it now but the network still won't connect. My network driver is the Killer network. I also tried to restore but apparently my PC never made an automatic save. Now what do I do?
View 2 Replies View RelatedI have just installed windows 8.Whenever I connect the computer to the internet the windows gets crashed and computer restarts. Remedy if any?
View 1 Replies View RelatedI have a Dell Inspiron 660s running Windows 8.1, and I just did a full boot of Ubuntu 13.10 onto a Dell Optiplex 330 that was previously running Windows XP. My goal is to connect to the internet by using the 660s as a bridge to the internet by connecting the two computers with an ethernet cable.
The level of difficulty: My internet requires you to log into it on a separate browser log in page similar to those in airports and other public Wi-Fi access points except that it requires a username and password to log in. My theory is that if I first log in to the internet on my Windows machine then I can connect to it by simply opening a connection from the Ubuntu OS to the Windows OS. Am I off track here or am I on the right track?
Network malfunction after upgrading win 8 pro 64 to win 8.1
Only IE 11 can connect to the internet. Firefox chrome or other programs not connecting...
I removed Eset disable firewall but nothing work.
I have a Microsoft Surface Pro where I have installed the Hyper-V manager and so on. I have made a virtual external switch and a virtual machine with Server 2012 on it. It connects fine to the switch. The Hyper-V makes a virtual bridge and all seems fine. But the guest does'nt get an IP adresse, and can't connect to the internet/LAN.
I have made the exact same setup on my laptop connected to Ethernet and there is no problem at all.
Does the Surface Pro Wireless have a problem with Hyper-v ?
In Windows 8 Pro I have created a virtual machine using Win XPSP3. I've tried everything I can to get an internet connection for my VM. I'm not on a network so I've created an external virtual switch. I've tried using both the legacy adapter and a network adapter. I've tried changing the IP address -even tried a DNS address but the best I've achieved so far is "limited or no Connectivity". I also tried Win 7 Home Premium VM with the same result - no internet connection. The virtual manager should set this up automatically
View 9 Replies View RelatedI offten play game online, and my network is not fast. So when I playing game, it's usually "lag". I think it is because the modern apps (mail, people, weather...) and other background services auto connect to internet. I can stop or turn off these background services, but I don't know how to turn off or prevent modern apps do that to improve the network speed.
View 4 Replies View RelatedI have an HP laptop running Windows 8. On 09/15, it did an automatic update to Windows. After that I am not able to browse internet using any browser - IE, firefox, Chrome. My laptop connects to internet. Apps like yahoo messenger works fine. But browsers wont.
I searched internet and as per some forums I tried 'netsh winsock reset ' command. After that browser will connect to internet, but after a minute or so, it stops connecting. Also, I noticed that when I do a restart, the laptop doesnt restart. It shows the 'Restarting' screen for hours and I have to manaully power it off.
I have no clue what update was pushed by microsoft which messed up my laptop. The laptop is pretty new and I did not have any issues until the windows update.
Any way to update the HyperV Client within Win8 Pro to Server 2012 standard of features?Primarily I'd like to use a Win8 client machine to host a VM with RemoteFX (DX11 GPU) support to another client machine, within a small office environment.
Actually I've just looked up the possible answer for this here: [URL] ....
Unfortunately it seems that Win8 Pro and below does not support the hosting of this feature. Any way to bypass this limitation?
