I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image).
After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly. When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.
But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.
All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them. Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.
I am running Windows 8.1 Pro with Hyper-V enabled. When I had Windows 8 I could install a Virtual switch with out any problems, since upgrading I can not install a Virtual Switch with External or Internal settings.
Not sure if this is relevant or not but when I look at the Ethernet properties never "Hyper-V Extensible Virtual Switch" or "Microsoft Network Adapter Multiplexor Protocol" are ticked. I have tried ticking them but get the error message "Could not add the requested feature. The error is: The data is invalid". I have checked that I am using the latest and correct driver for the card.
Upgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
I have to run a few programs only available on linux.
As seen on almost all the sources I visited, I installed VirtualBox and downloaded the last Ubuntu "iso" file. after having installed the new OS on virtualbox, I tried launching it and got the very often found "VT-x is disabled in the BIOS" error.
The solution also given in all the sources I visited is "enable Hyper-V" in the "windows features turn on or off" menu. Problem is : I can't find this option (I even looked in the least probable sub directories, just in case)
I found out this feature was only available for "Pro" versions of windows 8/8.1.
My question is : Is it feasible for me to run a virtual machine, or even run a machine on dual boot on my default-installed-windows 8 machine? I don't have the money to buy the pro package (which, for some reason, is MUCH more expensive than the "previous windows to 8.1 pro" update).
My hardware is more than sufficient: 64bits i7-4700HQ processor, 8Gb RAM DDR3l
How do I save a Virtual Machine to do a restore? I just finished a XP Pro VMware machine and I want to save it. There is a folder named Virtual Machines under My Documents. Is this what I backup?
I would like to run ubuntu as virtual machine on my win 8 desktop pc. I installed vmware player and then separately downloaded an ubuntu iso- couple of problems:-
There seems no option on vmware player to create a VMVMware player doesn't seem to recognise iso files - its looking for a vmx file - which I don't appear to have.... This is my first venture into vm's -
In Windows 8 Pro I have created a virtual machine using Win XPSP3. I've tried everything I can to get an internet connection for my VM. I'm not on a network so I've created an external virtual switch. I've tried using both the legacy adapter and a network adapter. I've tried changing the IP address -even tried a DNS address but the best I've achieved so far is "limited or no Connectivity". I also tried Win 7 Home Premium VM with the same result - no internet connection. The virtual manager should set this up automatically
I have a Mac running Windows 8.1 via Parallels. What I am trying to do is set up a test 2012 SBS my PC and while trying to connect to my local machine on Hyper-V I get this [URL] I've tried running as admin, I've also tried starting services however I get this [URL]
Any way to update the HyperV Client within Win8 Pro to Server 2012 standard of features?Primarily I'd like to use a Win8 client machine to host a VM with RemoteFX (DX11 GPU) support to another client machine, within a small office environment.
Actually I've just looked up the possible answer for this here: [URL] ....
Unfortunately it seems that Win8 Pro and below does not support the hosting of this feature. Any way to bypass this limitation?
Am testing out a version of windows 8 in client hyper-v. I want to give it internet access so that I can active it(am actually testing the activation process). I want the virtual machine to use my dial up connection. How do I do this.
I can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
How to install Hyper-V Manager on Windows 8.1? I can't find anything to say it isn't possible, but I also can't find any way to install it. Anything I have been able to find refers only to installing it in Windows 8.1 Pro, but says the host software requires Pro or Enterprise. However, since I am not installing the host, it looks like it is possible, if you can find the source.
The reason I need to do this is that I have a Windows 8.1 machine and a Windows Hyper-V Server 2012 R2 Core machine, and I would like to be able to access the GUI tools for Hyper-V Manager. This is so I can directly access and see the machines I am running. Right now, I have a machine, but I have no way of accessing it.
All of a sudden I have 4 Removable Drives on my windows 8 machine. I've tried removing these, but they return as soon as I restart.
I went into computer/disk management, right clicked each and uninstalled the driver, but no way. So I went to Device Manager and first disabled and then uninstalled each one of them, but still they exist immediately on restarting the system. They react to "eject" on right-click by stating
The disk drives as seen in Device Manager are:
Generic - Compact Flash USB Device Generic - MS/MS-Pro USB Device Generic - SD/MMC USB Device Generic - SM/xD-Picture USB Device
I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
I need to test and run some old Windows XP Programs So I have decided to Use Windows Virtual PC With Windows XP Mode. But I can't get any link to download these two things.
Any link for The Windows Virtual PC and The Windows XP Mode? How to install it?
I have two servers installed via HyperV, one is Server 2008 R2 and the other is Server 2012. I want to get them to communicate with eachother but I only have 1 nic onboard. I've setup an external virtual switch and have internet connection with my host OS and both servers (same connection) but I don't know what steps I need to take next to get them to talk to eachother and share resources. I also plan on making a few more VM's (Ubuntu/Fedora) and want to make them to talk to eachother as well (which will be a later question )
I have activated Hyper-V on my Windows 8 Pro computer. I have a vhd file created by VirtualBox and another from Microsofts WindowsXPMode_en-us.vhd. Being 100% new to Hyper-V, I am not sure if I am doing this correctly.
I have gone to the Hyper-V Manager, selected Import Virtual Machine. I select the proper directory and then I get the message, "Hyper-V did not find virtual machines...". I am running as administrator.
I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.
I've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
I am using Windows Virtual PC which was a 64-Bit version I installed, I got XP Home 32-Bit installed via it perfectly and tried to install Windows 8 x64 AND THEN Windows 8.1 x64 but on both I got the BSOD (in the Virtual Machine) almost straight away saying 64-bit CPU is not supported?
I've read this may be due to not having VTx but I do as my CPU is a 3470 (Ivy Bridge) and SIW says its enabled as does BIOS
I am testing some Windows ISO's to check to make sure they are OEM and ask for product key during install but also to diagnose a WSUS Offline issue in windows 8 that reverses all updates right at the end saying there was a problem, the software creator needs a log and I ain't got time at work.
I am using dell laptop with windows 8.1 operating system. I want to install win 7 mode as virtual machine in win 8.1 . Is possible to install as virtual machine in win 8.1? If possible it need any additional license key for win 7 mode?
I am trying to load a developed application on windows phone 8.0 emulator but whenever I try run/test using visual studio i got error shown in the image
I am a newbie in windows phone development .... Troubleshooting the Windows Phone 8 Emulator .... but still its same ....
Today, I installed Linux Mint 13 to try some appliactions, programs and other good things.I downloaded it normally and after installing it I don't have network connection.
I tried with all type of network switches and activated Legacy Network Adapter but it don't work (I configured in network adapter for ex. External Network 1 , I want to say it's not say : Not Connected in VM Settings).
When I turn it Linux Mint says : Disconnected - you are now offline.
How to configure network and the Internet to work with Linux Mint VM ?
For XP users who want to keep using their XP system why not run VMWARE VMPLAYER -- FREE in UNITY MODE.
You don't need even to run Windows as your Host --how to create a Portable system that runs Windows Virtual machines and totally boots from an external HDD / USB stick (even if there's no HDD in the main computer !!).
Using Unity mode simply gives you access to all your Windows XP programs (and runs them) directly from the Host without you needing to enter the VM at all -- Power up your VM and simply click the Unity mode on the vm menu.
If you use Linux as a host it saves you having to purchase a new version of windows (Linux is FREE). Simply convert your XP system to a VM and then you can keep running XP for as long as you like without worrying about having to upgrade Windows.
I have recently upgraded to Windows 8.1. After the update what i have noticed is i lost wifi connectivity in the virtual machine which running Windows 2008 R2 server. I have Windows 8.1 and VMware workstation 8.0. Windows 2008 R2 is running in the Virtual machine and i was able to connect to wifi from the virtual machine and share files netween Windows 8 and Windows 2008 R2. but now i can't connect anymore. Even when i enable WLAN service on Windows 2008 R2, i don't see the wifi adapter in network settings.
