I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
How to install Hyper-V Manager on Windows 8.1? I can't find anything to say it isn't possible, but I also can't find any way to install it. Anything I have been able to find refers only to installing it in Windows 8.1 Pro, but says the host software requires Pro or Enterprise. However, since I am not installing the host, it looks like it is possible, if you can find the source.
The reason I need to do this is that I have a Windows 8.1 machine and a Windows Hyper-V Server 2012 R2 Core machine, and I would like to be able to access the GUI tools for Hyper-V Manager. This is so I can directly access and see the machines I am running. Right now, I have a machine, but I have no way of accessing it.
I am running Windows 8.1 Pro with Hyper-V enabled. When I had Windows 8 I could install a Virtual switch with out any problems, since upgrading I can not install a Virtual Switch with External or Internal settings.
Not sure if this is relevant or not but when I look at the Ethernet properties never "Hyper-V Extensible Virtual Switch" or "Microsoft Network Adapter Multiplexor Protocol" are ticked. I have tried ticking them but get the error message "Could not add the requested feature. The error is: The data is invalid". I have checked that I am using the latest and correct driver for the card.
I have two servers installed via HyperV, one is Server 2008 R2 and the other is Server 2012. I want to get them to communicate with eachother but I only have 1 nic onboard. I've setup an external virtual switch and have internet connection with my host OS and both servers (same connection) but I don't know what steps I need to take next to get them to talk to eachother and share resources. I also plan on making a few more VM's (Ubuntu/Fedora) and want to make them to talk to eachother as well (which will be a later question )
I can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
I have activated Hyper-V on my Windows 8 Pro computer. I have a vhd file created by VirtualBox and another from Microsofts WindowsXPMode_en-us.vhd. Being 100% new to Hyper-V, I am not sure if I am doing this correctly.
I have gone to the Hyper-V Manager, selected Import Virtual Machine. I select the proper directory and then I get the message, "Hyper-V did not find virtual machines...". I am running as administrator.
I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.
I've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly. When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.
But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.
All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them. Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.
Upgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image).
Today, I installed Linux Mint 13 to try some appliactions, programs and other good things.I downloaded it normally and after installing it I don't have network connection.
I tried with all type of network switches and activated Legacy Network Adapter but it don't work (I configured in network adapter for ex. External Network 1 , I want to say it's not say : Not Connected in VM Settings).
When I turn it Linux Mint says : Disconnected - you are now offline.
How to configure network and the Internet to work with Linux Mint VM ?
I am looking into setting up a type 1, native hypervisor on my desktop (Xen, specifically). Would it be possible for me to load my current install into a VM? The hypervisor can be run from a live disk.
Host OS: Windows 7 Ultimate x64 on SSD system disk. PC Specs: Intel Core i7 3770K on ASRock Z77 OC Formula with 16GB DDR3, GTX470 VirtualBox version: 4.3.12 r93733 with Extension Pack 4.3.12 r93733.
I've had a Windows 8.1 Pro x64 VM running on VBox 4.3 for a few days now with no issues at all.
However, this morning, the VM refused to boot saying VT-x was not enabled.
I checked via the VM settings but the whole "Acceleration" pane was disabled and not accessible. I was not able to resolve the issue even after rebooting my PC and explicitly enabling Intel Virtualization in the PC BIOS (it was on AUTO before - I set it to ENABLE).
I have since several times removed the VM completely and attempted to reinstall.
Every time, the VM hangs on the Windows 8 logo screen on install and then crashes with the Error 0x000000C4.
As found on VirtualBox community forums and on other sites, I have tried the SETEXTRADATA command via command prompt running as administrator, and have confirmed that the .vbox file has been changed and the string ExtraDataItem name="VBoxInternal/CPUM/CMPXCHG16B" value="1" appended in the <ExtraData> section.
However the VM still refuses to boot or reinstall. I have Ubuntu, Fedora and ZorinOS VM's all working perfectly.
The only change to my system that took place in the interim was that I installed Comodo Free Firewall last night. Seeing the problems I have been having with the VM since this morning, I uninstalled Comodo and rebooted thinking it might have something to do with my problems, but still no joy.
I am also uploading my .VBOX files before and after to show the changes that have been made by the SETEXTRADATA command.
Goal: run both windows 7 and windows 8.1 native from VHDX (currently only success with Windows 8.1 on vhdx and win7 vhd)
I have a windows 8.1 installed in the system and rebooted into a command prompt, created a vhdx image, converted to GPT, and then install windows 7 on this vhdx (both with and without KB982018 integrated). The install went through (copying files etc) and it then rebooted itself and finish off the reset of the installation. After it rebooted it the boot menu is the old style black and white (which is fine), and choose win7 vhdx to finish off the installation. However an error comes up - An unexpected error has occurred.
Having no luck therefore instead of installing to a VHDX I now boot up with the win7SP1 USB and install onto a VHD instead. Everything went well and booted into windows 7 (expected). I then install KB980218 and then it rebooted itself, again everything is ok. I then booted back into windows 8, converted the windows 7 from VHD to VHDX and set the sector size to 4096 as per How to Convert a VHD File into VHDX. Boot entry has also been updated to vhdx instead of vhd.
I now try to boot to this new win7 vhdx, and instead of getting an unexpected error, it booted into a graphical screen and ask for repairing the window. (which means it's unsuccessful).
Any way to update the HyperV Client within Win8 Pro to Server 2012 standard of features?Primarily I'd like to use a Win8 client machine to host a VM with RemoteFX (DX11 GPU) support to another client machine, within a small office environment.
Actually I've just looked up the possible answer for this here: [URL] ....
Unfortunately it seems that Win8 Pro and below does not support the hosting of this feature. Any way to bypass this limitation?
I have a sony vaio core i7, 8 gb ram windows 8 pro with hyper-v for windows 8 installed and working. my issue is that all my vms come up fine but after about 10 minutes of inactivity they automatically shut down. I have set all my power options in both the vm and my host as never on all the sleep options, still the problem persists. I need these vms to stay up.
Am testing out a version of windows 8 in client hyper-v. I want to give it internet access so that I can active it(am actually testing the activation process). I want the virtual machine to use my dial up connection. How do I do this.
I need to install Hyper-V, to run Windows Phone 8 emulator on my machine. But I am(actually my system) not able to complete the installation process.
When I enable Hyper-V in the window, it asks for a restart. After restart, during logon screen, it shows Updating. At around 91-95%, system shows "We couldn't complete the features. Restarting." And system rolls back. I want to really use WP8 emulator.
Also my system meets all the necessary system requirements for Hyper-V, already checked via CoreInfo, and Virtualization is ON in BIOS.
How to Get Windows XP Mode on Windows 8 I have Windows XP SP3 already listed in compatibility mode. I am running Windows 8 pro. I really don't understand what they are trying to tell you here. I have never had an older program to run with the compatibility mode anyway.
get a XP vhd up and running *except* I do not have Network or USB capabilities. Apparently I am suppose to get an option to install the drivers from the host computer (Windows 8.1); I do not see/get that option.
Here is an issue I have run into since I side graded to 8.1.Pro on one of my machines. I expect the other machine has the same issue but I mostly use 7 ATM. I have some XP virtual machines that were created by importing the image of XP into VMWare Player and now those VM refuse to run with the following error.
It is obvious the VM was based on the XP machine from Windows 7 Ultimate. How can I fix this as XP Mode does not install and Windows 7 is no longer on this machine so I can't point the program at the file on another OS drive?
I didn't install any 3rd party app to mount iso. Yesterday, i tried to mount a iso file, it didn't worked. Then googled about it, tried sfc /scannow, no success. Then I checked "Default programs - associate file extension...", there is no entry for .iso.
Tried Daemon tools lite... that is not working either.. After enabling virtual drives in DT, device manager's showing this: