How to Get Windows XP Mode on Windows 8 I have Windows XP SP3 already listed in compatibility mode. I am running Windows 8 pro. I really don't understand what they are trying to tell you here. I have never had an older program to run with the compatibility mode anyway.
View 9 Replies
If you are still using an XP mode virtual machine but want to upgrade to Windows 8 from W7 you CAN convert the XP mode VM to VMware so you don't have to lose your VM.
View 1 Replies View RelatedUpgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
My screen seems to have a grey filter overlaying it. See attached.
When i booted it in safe mode, the screen is showing the right vibrant colors. When i booted it back to normal mode, the screen is greyish but strangely the mouse is showing the correct white color.
I have googled across numerous website but none of them bring me closer to the issue. I have read the thread, Personalize Suddenly Greyed Out but this is not what i encountered. The options or buttons or selections did not grey out, it affects the screen only.
I cannot afford a system restore because i shared this laptop with my gf.
I now have an Internet connection with my XP. The last challenge is USB. Not sure if I am missing something, but I do not see it in the Setup.
P.S. I started this new thread though I did mention USB in my last.
Here is an issue I have run into since I side graded to 8.1.Pro on one of my machines. I expect the other machine has the same issue but I mostly use 7 ATM. I have some XP virtual machines that were created by importing the image of XP into VMWare Player and now those VM refuse to run with the following error.
It is obvious the VM was based on the XP machine from Windows 7 Ultimate. How can I fix this as XP Mode does not install and Windows 7 is no longer on this machine so I can't point the program at the file on another OS drive?
I need to test and run some old Windows XP Programs So I have decided to Use Windows Virtual PC With Windows XP Mode. But I can't get any link to download these two things.
Any link for The Windows Virtual PC and The Windows XP Mode? How to install it?
Sometimes Windows 8 just hangs after I look around and change some of the DVD related settings in VirtualBox. My host system is ubuntu and the guest is Windows 8.
When it hangs it is usually showing the Windows 7 desktop because I am always in that mode. I cursor to the lower left to try to the the mini-tiles but no matter what I do with the cursor, the mini-tiles do not appear. In fact, nothing works. I cannot launch any desktop applications.
In the past I solved this by simply having VirtualBox send the shutdown power-off signal. Windows is ignoring the shutdown signal. Is there a Windows-centric way to fix this problem so that I can do a Windows-centric shutdown in the normal fashion or otherwise resolve or prevent this problem?
VirtualBox running on windows 8 pro 64bit. I first installed it 2 weeks ago and I had no problems.
At the weekend I decided to set up my virtual machines from my Vista install and some of the older ones didn't work so I decided to uninstall and reinstall VirtualBox.
I checked that the version I had was still the latest version and reinstalled it.
Last night I had problems with my computer hanging at the windows 8 desktop screen for 2-5 minutes before I could open Internet explorer straight after boot up. This was with VirtualBox not running so I presume it's one of the drivers causing the problem.
It seems strange that it was ok until I reinstalled it.
I'm not sure weather to reinstall it again or wait for another update.
I was wondering if oracle virtualbox will run on windows 8 pro 64 bit i would like to use it instead of using the built in one that came with windows as i want to run Tails from [URL] .... in a VM and it is not supported by the built in Hyper-V on windows 8. but i don't want to goof up windows by installing another virtual software so i need to know if it will work before I do it.
View 6 Replies View RelatedI can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
View 3 Replies View RelatedAfter installing the W 8.1 Preview, seems the VirtualBox networking is out.
This is using the latest VBox 4.2.14.
Re-installing VirtualBox solves it but duplicate driver entries still remain, one being the old one.
My HP Pavilion is not letting me use any kind of virtualization software to run on Windows 8. It worked when I had Windows 7 running on this machine but now it won't work now on Windows 8.
View 10 Replies View RelatedInstalled windows 8.0 pro on oracle VM VirtualBox (running 8.1 pro on host machine) and it asks me to activate windows.
Okay, but it doesn't accept the product key I purchased for the host machine. What to do?
I'm trying to set up Virtual PC 2007 SP1 on Windows 8.1 Pro with Update.
By default, the Program Compatibility Assistant blocks this with the following notice:
The easy way to get around this is to rename the installer and then rename the main EXE that gets installed. There are a few other tricks (including replacing VMM.sys) and then it works. However, the EXE rename appears to be affecting my ability to double-click on a VM to start it so I thought it would be nice to just disable PCA altogether so I don't have to rename the EXE. Following the various instructions (including some from Microsoft), I haven't been able to disable PCA. Specifically, I have:
1) Attempted to create an EXE exclusion by editing the registry and creating a REG_MULTI_SZ value called "ExecutablesToExclude" with the full path to the Virtual PC.exe excutable in the following registry locations:- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsCompatibility Assistant- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionCompatibility Assistant
2) Changed the following Group Policy settings:- Computer Configuration > Administrative Templates > Windows Components > Application Compatibility:Enabled "Turn off Application Compatibility Engine"Enabled "Turn off Program Compatibility Assistant"- User Configuration > Administrative Templates > Windows Components > Application CompatibilityEnabled "Turn off Program Compatibility Assistant"
3) Stopped and disabled the following services:- Application Experience- Diagnostic Policy Service- Program Compatibility Assistance Service
Despite doing all of this, I keep getting the error popup above. It keeps coming back from the dead like {insert your favorite horror movie villain here}.
In the Event Viewer logs, I also see a "Critical" error (event ID 2) from source "ApplicationExperienceInfrastucture" that says "The application (Virtual PC 2007 SP1, from vendor Microsoft) was hard-blocked and raised the following: Virtual PC 2007 SP1 is not supported on this version of Windows. For more information, contact Microsoft."
I'm guessing that Microsoft changed PCA in the Windows 8.1 Update but hasn't documented the changes yet. How to fully disable PCA?
What is the difference between the version of hyper-v available in
1:- Windows 8 and windows server 2012.
2:- Windows 8.1 and windows server 2012 r2.
And what is the version of hyper-v in each os version.
Create a Client Hyper-V Virtual Machine for Windows XP, I showed you how to create a virtual machine in Windows 8's Client Hyper-V designed for Windows XP. Using this technique, you can run Windows XP applications from your Windows 8 system by switching over to the virtual machine. However, since that article was published, I've received email from readers wondering if there was a way to run Windows XP applications in Windows 8 like you could with the Windows XP-Mode feature in Windows 7.
View 2 Replies View RelatedRunning a Windows 8.1 Virtual machine from a LINUX host with 3-D support working. What distro are you using. (VMware player / workstation).
I've tried SUSE and DEBIAN - the VM runs perfectly except I can't get 3-D support or hardware graphics acceleration.
Under Windows as host (W7) no problem !!.
How to install Hyper-V Manager on Windows 8.1? I can't find anything to say it isn't possible, but I also can't find any way to install it. Anything I have been able to find refers only to installing it in Windows 8.1 Pro, but says the host software requires Pro or Enterprise. However, since I am not installing the host, it looks like it is possible, if you can find the source.
The reason I need to do this is that I have a Windows 8.1 machine and a Windows Hyper-V Server 2012 R2 Core machine, and I would like to be able to access the GUI tools for Hyper-V Manager. This is so I can directly access and see the machines I am running. Right now, I have a machine, but I have no way of accessing it.
I've created a "Powered on machine" virtual installation of my Windows 8 on VMware VCentre Convertor to run in VMware Player, the size of the Hard drive was about 130GB, in the virtual machine I've deleted all my media files and uninstalled the large programs. The size of the C: drive is now 40GB which is more manageable for a Virtual Install which will be used to tweaking experimentation before I do it to my real Windows 8 installation.
How do I shrink the Virtual Hard drive from 130GB to say 45GB, I have installed the VM Tools and reading on the VMware website it saying you go to the VM Tools in the ghost install by right clicking it in the system tray or going to control panel on the ghost install and click on shrink. I have the icon in the system tray but the only right click options are about and there is nothing in control panel.
I have tried the "compact" option in the virtual machine settings by right click my Windows 8 virtual machine from the VMware player but it doesn't shrink the volume, it wirred away for an hour but the hard drive stayed the same size.
IF has Win 8 Pro 64bit in Wmware Player could they look to see if the shrink option is there on the Virtual install of Win 8 by right clicking VM tools in the system tray and clicking settings or options.
I am trying to mount a VHD file from my WindowsImageBackup. I used a script to have Take Ownership of a folder, and did that to WindowsImageBackup,. I am using Disk Management -> Action -> Attach VHD. Now I see the drive mounted in Disk Management, but I can not explore it or open it. But I desperetely need a couple files from there for work. I am running windows 8.1.
View 4 Replies View RelatedI wanted to try the new Windows 8.1 i downloaded virtualbox and downloaded the windows 8 64 bit ISO and it blue screens upon startup what i find strange is i know i can run windows 8 i had the preview iso for windows 8 when it was under development.
View 9 Replies View RelatedI have to run a few programs only available on linux.
As seen on almost all the sources I visited, I installed VirtualBox and downloaded the last Ubuntu "iso" file. after having installed the new OS on virtualbox, I tried launching it and got the very often found "VT-x is disabled in the BIOS" error.
The solution also given in all the sources I visited is "enable Hyper-V" in the "windows features turn on or off" menu. Problem is : I can't find this option (I even looked in the least probable sub directories, just in case)
I found out this feature was only available for "Pro" versions of windows 8/8.1.
My question is : Is it feasible for me to run a virtual machine, or even run a machine on dual boot on my default-installed-windows 8 machine? I don't have the money to buy the pro package (which, for some reason, is MUCH more expensive than the "previous windows to 8.1 pro" update).
My hardware is more than sufficient: 64bits i7-4700HQ processor, 8Gb RAM DDR3l
I'm not much of a VM expert. I have a couple of win7 systems running a WinXP VM that I installed manually, in all those cases, the virtual network has always just booted up and worked. Under Windows 8 Pro-RTM, I did a XP VM that I loaded myself (versus an XP mode) and it loads the virtual network adapter but it reports that the cable is unplugged
I'm not clear on what this means. Obviously, it's a VM so there is no cable to plug in. I'm guessing I'm suppose to match that Virtual Nic to the regular (aka Host's) NIC but I'm not see any options to do so.
On the same system I run windows 7 Ult and a XP install and the network loads up on boot.
I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image).
View 9 Replies View RelatedFor XP users who want to keep using their XP system why not run VMWARE VMPLAYER -- FREE in UNITY MODE.
You don't need even to run Windows as your Host --how to create a Portable system that runs Windows Virtual machines and totally boots from an external HDD / USB stick (even if there's no HDD in the main computer !!).
Using Unity mode simply gives you access to all your Windows XP programs (and runs them) directly from the Host without you needing to enter the VM at all -- Power up your VM and simply click the Unity mode on the vm menu.
If you use Linux as a host it saves you having to purchase a new version of windows (Linux is FREE). Simply convert your XP system to a VM and then you can keep running XP for as long as you like without worrying about having to upgrade Windows.
I need to install Hyper-V, to run Windows Phone 8 emulator on my machine. But I am(actually my system) not able to complete the installation process.
When I enable Hyper-V in the window, it asks for a restart. After restart, during logon screen, it shows Updating. At around 91-95%, system shows "We couldn't complete the features. Restarting." And system rolls back. I want to really use WP8 emulator.
Also my system meets all the necessary system requirements for Hyper-V, already checked via CoreInfo, and Virtualization is ON in BIOS.
Okay I have created a virtual drive, switch and then created a new virtual machine.
I have downloaded a windows 98 iso (legally, I have a disk but its badly scratched).
I'm trying to install win98 on the VM but not sure how. I had the option when I was playing around with the first time and chose install later.
I deleted the VM and drive, created new ones but didn't get the option to install an OS.
If I start the vm I just get boot failure. I have mounted the win 98 iso in the virtual cd drive but nothing's happening!
I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
get a XP vhd up and running *except* I do not have Network or USB capabilities. Apparently I am suppose to get an option to install the drivers from the host computer (Windows 8.1); I do not see/get that option.
View 9 Replies View RelatedI didn't install any 3rd party app to mount iso. Yesterday, i tried to mount a iso file, it didn't worked. Then googled about it, tried sfc /scannow, no success. Then I checked "Default programs - associate file extension...", there is no entry for .iso.
Tried Daemon tools lite... that is not working either.. After enabling virtual drives in DT, device manager's showing this:
