I need to install Hyper-V, to run Windows Phone 8 emulator on my machine. But I am(actually my system) not able to complete the installation process.
When I enable Hyper-V in the window, it asks for a restart. After restart, during logon screen, it shows Updating. At around 91-95%, system shows "We couldn't complete the features. Restarting." And system rolls back. I want to really use WP8 emulator.
Also my system meets all the necessary system requirements for Hyper-V, already checked via CoreInfo, and Virtualization is ON in BIOS.
I have many virtual machines in my VMWare Workstation install on Windows 7. I have now let Windows 8.1 lose on the bare metal of this machine as a dual booting system. I have enabled Hyper V on 8.1 to "play around with it and when I went to install VMWare the installer quit stating Workstation could not be installed with Hyper V installed. I don't have to know about Hyper V was just going to play around with it but VMWare will always be my main virtual platform.
I enabled Hyper-V on my computer. When it restared I saw it was configuring Hyper-V. I didn't opened Hyper-V the same day. Two days later, I wont to open Hyper-V but I can't find it anywhere! Also, it isn't listed in programs anymore... I also enabled virtualisation in the BIOS.
I've installed Win Pro 8.1 on a new desktop and added the Hyper-V feature. Checking the bios shows Virtualization is enabled, and I contacted intel about the processor who verified it supports virtualization (dell said it doesn't). I can start the VM manager, create an Internal Lan Switch and go through the steps to create a new VM machine. When I click on Connect the VM window opens, then I start it. At that point the VM screen says "Connecting to Vm1. It cycles through for a while then shows an message " it couldn't start try again if this persists contact your system admin" (paraphrasing). What I find more odd is the bottom pane that opens in the VM manager when I connect to the VM shows the VMs state(?) and the image loads with a login screen.
One other thing, when I try to stop the virtual machine in the Manager it says stopping but never really does it hangs up. The manager is responsive but no commands seem to execute. I then go to Services in msc and stop it and it says stopping the service and hangs there with the service grayed out and not able to select start, stop, refresh etc.
I have a Microsoft Surface Pro where I have installed the Hyper-V manager and so on. I have made a virtual external switch and a virtual machine with Server 2012 on it. It connects fine to the switch. The Hyper-V makes a virtual bridge and all seems fine. But the guest does'nt get an IP adresse, and can't connect to the internet/LAN.
I have made the exact same setup on my laptop connected to Ethernet and there is no problem at all.
Does the Surface Pro Wireless have a problem with Hyper-v ?
I have a Mac running Windows 8.1 via Parallels. What I am trying to do is set up a test 2012 SBS my PC and while trying to connect to my local machine on Hyper-V I get this [URL] I've tried running as admin, I've also tried starting services however I get this [URL]
I got Hyper V setup (I think). The GUI client starts and I can go to the server. I could not get the continuous page after page setup to work unless I first set up a virtual hard drive. I think there was an option to install the OS if I set up the Vm and the VHd at the same time. I am now starting the VM and connecting to it and trying to install the OS using my original OS disk in the CD/DVD drive. It went to drive/DVD and I got the usual promtp: what do you want to do, including "run setup" which is what I selected.
When I do that it takes a long time to setup/copy files and when it gets tot he screen as to what partition to install to, it only shows the system reserved, my boot partition, my data partition (which has the VHDX) and my MBR (BootIt Bare Metal main boot record) partitions. At this point I stopped the OS installation by powering down as while I had these all imaged/backed up I did not want to overwrite any of them. it did not show the VHDX as an option to which to install.
as for other options like install over a network, my network adapter doesn't show and even if I made an ISO image of my OS disk, i don't know how I would get access to it.
In setting up Hyper V I ran the following in a supershell: enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All
I tried to run the following in a command prompt: Dism /online /enable-feature /featurename:Microsoft-Hyper-V All but got an error that it did not recognize " -all " I then ran it without the dash or maybe with a slash in front of it (I can't remember). I don't even know what this command does and whether it could have an effect on installing an OS to a VHD.
I am running Win 8.1 Pro on an x220 with 8Gb RAM and a 500Gb SSD. I am trying to install Win 7 Ultimate on the VHD. How to install the OS to a virtual hard drive.
Upgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
I have a Hyper-V VM, and during the setup wizard I chose to install OS later.
I added DVD drive to it's hardware, and added the DVD drive to the boot order.
I put the retail Windows XP disc in the drive and start the VM, but it doesn't see the disk and eventually I get the error "Boot failed" for every boot device, and then finally "No operating system was Loaded. Press a key to retry the boot sequence...".
In setup for the VM, I see that I can "Specify the media to use with your virtual CD/DVD drive", which is an "image file". Does that mean it has to be an ISO, not a physical disk?
If so, any good way to make an ISO from my retail Windows XP Pro disk? It looks to me like Windows 8.1 File Explorer doesn't do it.
How to Get Windows XP Mode on Windows 8 I have Windows XP SP3 already listed in compatibility mode. I am running Windows 8 pro. I really don't understand what they are trying to tell you here. I have never had an older program to run with the compatibility mode anyway.
get a XP vhd up and running *except* I do not have Network or USB capabilities. Apparently I am suppose to get an option to install the drivers from the host computer (Windows 8.1); I do not see/get that option.
Here is an issue I have run into since I side graded to 8.1.Pro on one of my machines. I expect the other machine has the same issue but I mostly use 7 ATM. I have some XP virtual machines that were created by importing the image of XP into VMWare Player and now those VM refuse to run with the following error.
It is obvious the VM was based on the XP machine from Windows 7 Ultimate. How can I fix this as XP Mode does not install and Windows 7 is no longer on this machine so I can't point the program at the file on another OS drive?
I didn't install any 3rd party app to mount iso. Yesterday, i tried to mount a iso file, it didn't worked. Then googled about it, tried sfc /scannow, no success. Then I checked "Default programs - associate file extension...", there is no entry for .iso.
Tried Daemon tools lite... that is not working either.. After enabling virtual drives in DT, device manager's showing this:
I need to test and run some old Windows XP Programs So I have decided to Use Windows Virtual PC With Windows XP Mode. But I can't get any link to download these two things.
Any link for The Windows Virtual PC and The Windows XP Mode? How to install it?
I was just wondering if I could "Burn" a Virtual XP machine into a ROM -- I only need to run it to access some legacy hardware that I'll be keeping around for a good few years yet -- the ROM would ensure the XP system itself doesn't get altered in any way - I don't need Internet etc on it. I could have the ROM as a keyring FOB which would then be able to be connected to any PC I want. It would boot and operate a lot faster than by running it from a HDD or even an SSD. Only the OS and the hardware drivers / applications need to be installed. I'd use VMware on the HOST systems.
If you are still using an XP mode virtual machine but want to upgrade to Windows 8 from W7 you CAN convert the XP mode VM to VMware so you don't have to lose your VM.
Sometimes Windows 8 just hangs after I look around and change some of the DVD related settings in VirtualBox. My host system is ubuntu and the guest is Windows 8.
When it hangs it is usually showing the Windows 7 desktop because I am always in that mode. I cursor to the lower left to try to the the mini-tiles but no matter what I do with the cursor, the mini-tiles do not appear. In fact, nothing works. I cannot launch any desktop applications.
In the past I solved this by simply having VirtualBox send the shutdown power-off signal. Windows is ignoring the shutdown signal. Is there a Windows-centric way to fix this problem so that I can do a Windows-centric shutdown in the normal fashion or otherwise resolve or prevent this problem?
VirtualBox running on windows 8 pro 64bit. I first installed it 2 weeks ago and I had no problems.
At the weekend I decided to set up my virtual machines from my Vista install and some of the older ones didn't work so I decided to uninstall and reinstall VirtualBox.
I checked that the version I had was still the latest version and reinstalled it.
Last night I had problems with my computer hanging at the windows 8 desktop screen for 2-5 minutes before I could open Internet explorer straight after boot up. This was with VirtualBox not running so I presume it's one of the drivers causing the problem.
It seems strange that it was ok until I reinstalled it.
I'm not sure weather to reinstall it again or wait for another update.
I am looking into setting up a type 1, native hypervisor on my desktop (Xen, specifically). Would it be possible for me to load my current install into a VM? The hypervisor can be run from a live disk.
if you UPGRADE to Windows 8.1 rather than clean install then the VMware adapter settings (ON THE HOST) get hosed up. Your VM's won't be able to connect to your network ( and / or the Internet too).
Either re-install the adapters manually - via the VMware program "Repair program" or uninstall VMware and install the latest version - in my case VMware workstation 10.0.1
I made another post about this in the Forum elsewhere.
after system reinstall I'm trying to mount old system backup as virtual drive (software supports that) but it complaints about UIM not installed or not available. I think UIM is a part of Windows. How do I restore it?
I have two servers installed via HyperV, one is Server 2008 R2 and the other is Server 2012. I want to get them to communicate with eachother but I only have 1 nic onboard. I've setup an external virtual switch and have internet connection with my host OS and both servers (same connection) but I don't know what steps I need to take next to get them to talk to eachother and share resources. I also plan on making a few more VM's (Ubuntu/Fedora) and want to make them to talk to eachother as well (which will be a later question )
I was wondering if oracle virtualbox will run on windows 8 pro 64 bit i would like to use it instead of using the built in one that came with windows as i want to run Tails from [URL] .... in a VM and it is not supported by the built in Hyper-V on windows 8. but i don't want to goof up windows by installing another virtual software so i need to know if it will work before I do it.
I can't RDP from my host to my VM in Hyper-V,I'm running Windows 8.1 Pro. I have enhanced session mode enabled,all integration services running,I'm allowing RDP connections in System Properties,RDP is allowed through Windows Firewall,and I can ping the VM from my host.
I've now optimized my remaining Windows XP system --removed all the junk and duplicate programs which run on later versions of Windows so I've got a nice small tidy XP system -- basically Scanner (old canon photo scanner N1240), some VINYL editing and cutting software, OCR software, Minidisc software (still great for portable RECORDING !!) and an HP plotter and one or two odd programs. I don't need Photoshop or office any more in the XP system nor Ms Office, and I don't bother with the Internet on it either so no security problems there.
I've kept connectivity for printing (Epson 1400 printer) - the whole OS is 12 GB and it boots up in about 2 Secs (a VM running from a Linux host) --I've allocated it 1 GB - I'm sure I could run it in 768 MB too.
On my 8GB laptop it runs fine concurrently with a Windows 8.1 VM (allocated 4GB RAM for that) both on a Linux Host.
I have activated Hyper-V on my Windows 8 Pro computer. I have a vhd file created by VirtualBox and another from Microsofts WindowsXPMode_en-us.vhd. Being 100% new to Hyper-V, I am not sure if I am doing this correctly.
I have gone to the Hyper-V Manager, selected Import Virtual Machine. I select the proper directory and then I get the message, "Hyper-V did not find virtual machines...". I am running as administrator.
I'd like to upgrade from Windows 8 to Windows 8.1 Pro. This will be run as a guest on VirtualBox 4.3.2 (the newest as of November 2013) on Ubuntu 12.04 (April 2012) with weekly updates.
In Windows Store, an attempt to upgrade fails because, it indicates that Windows 8.1 is "not supported by your CPU". This is a doubtful explanation because it runs Windows 8 fine. The CPU is an Intel i7 - 2670 QM that was released in Q4 2011 in a unit that retailed in June 2012. VirtualBox has WDDM and 3D acceleration since at least VirtualBox 4.1 which was released more than a year ago. I run with VirtualBox's display 2D acceleration ON, and previously with 3D acceleration OFF because I've had problems. However, 3D acceleration is presently ON. Regardless, Windows 8.1 will not install either way.
This is what Microsoft indicates under "more information" about Win 8.1.
Processor: 1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2 (more info)RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)Graphics card: Microsoft DirectX 9 graphics device with WDDM driver
I note that Windows 8 also requires PAE, NX, and SSE2 so that should not be the problem. I have allocated 4 GB RAM and about 500 GB disk, which are both more than adequate.
Edit: I use a 64 bit machine with 64 bit Linux and 64 bit Windows. Edit: Although I tried to install Windows 8.1 with 3D acceleration ON, I generally keep it OFF because it can result in a crash of my .NET application that uses a XAML window. It's not a bug that I care enough about to fix.
How do I fix this Windows 8.1 installation problem?
