Virtualization :: Windows 8.1 - Can't Get Rid Of Program Compatibility Assistant
Jul 16, 2014
I'm trying to set up Virtual PC 2007 SP1 on Windows 8.1 Pro with Update.
By default, the Program Compatibility Assistant blocks this with the following notice:
The easy way to get around this is to rename the installer and then rename the main EXE that gets installed. There are a few other tricks (including replacing VMM.sys) and then it works. However, the EXE rename appears to be affecting my ability to double-click on a VM to start it so I thought it would be nice to just disable PCA altogether so I don't have to rename the EXE. Following the various instructions (including some from Microsoft), I haven't been able to disable PCA. Specifically, I have:
1) Attempted to create an EXE exclusion by editing the registry and creating a REG_MULTI_SZ value called "ExecutablesToExclude" with the full path to the Virtual PC.exe excutable in the following registry locations:- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsCompatibility Assistant- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionCompatibility Assistant
2) Changed the following Group Policy settings:- Computer Configuration > Administrative Templates > Windows Components > Application Compatibility:Enabled "Turn off Application Compatibility Engine"Enabled "Turn off Program Compatibility Assistant"- User Configuration > Administrative Templates > Windows Components > Application CompatibilityEnabled "Turn off Program Compatibility Assistant"
3) Stopped and disabled the following services:- Application Experience- Diagnostic Policy Service- Program Compatibility Assistance Service
Despite doing all of this, I keep getting the error popup above. It keeps coming back from the dead like {insert your favorite horror movie villain here}.
In the Event Viewer logs, I also see a "Critical" error (event ID 2) from source "ApplicationExperienceInfrastucture" that says "The application (Virtual PC 2007 SP1, from vendor Microsoft) was hard-blocked and raised the following: Virtual PC 2007 SP1 is not supported on this version of Windows. For more information, contact Microsoft."
I'm guessing that Microsoft changed PCA in the Windows 8.1 Update but hasn't documented the changes yet. How to fully disable PCA?
View 8 Replies
ADVERTISEMENT
Feb 22, 2014
I'm in need of installing IntelliType 6.x to be able to use all functions of my Microsoft Office Keyboard, but the Program Compatibility Assistant doesn't let me, even though I've correctly set the policy rules (as described here) and even turned off the Diagnostic Policy Service.
The only options I have is "get help online", which tells me that I should download the latest version, and "close" which doesn't run the installer at all.
I understand the program might not work, but Microsoft should at least allow people to bypass their "Let Microsoft decide for you" BS (which I've met like six billion times by now) and let the idiots (i.e. me) take the risk of ruining their computer if they want to.
View 8 Replies
View Related
Nov 25, 2012
I have a simple shortcut file (.lnk) which I want to make "Always run as administrator", but I can't see the compatibility tab?
View 6 Replies
View Related
Apr 27, 2014
In windows 8.1, I installed the Lenovo Power Manager which is not yet available for this system, and I did it running it in compatibility mode, as described in the next link
Lenovo forums : Lenovo Power Manager in Windows 8 - Page 3 - Lenovo Community
and it got installed correctly, and seemed to work asking for a reboot that I did
The problem: I run into a BSOD and I believe it is due to this software (safe mode works ok)
So, as I try to unistall, and the uninstaller is called from "ADD or REMOVE PROGRAMS", all I get is again the message: "Warning : Cannot run on this system"
And of course, here there is not compatibility mode wizard .. How can I complete uninstall and clear this?
View 2 Replies
View Related
Jan 21, 2014
I've installed Quicken 2004 on Windows 8.1 in compatibility mode for Windows XP 3 to run as administrator. Everything seems to work well. All my data appears to have been restored including Home Inventory. I can download bank data.
Automatic backup works. I tested this by changing the system date to trigger the backup.
The infuriating thing is I cannot do a manual backup from the file menu. The dialogue box opens. I can complete the relevant fields but when I click OK the program freezes. There are no error messages.
Not sure if this is a Windows issue e.g. permissions or Quicken issue e.g looking for a file that doesn't exist. I have checked the 'Ready for archive' box of the folders, sub-folders, and files property boxes.
Are there any settings in Win 8.1 that I need to change to allow a program to write to a drive when it is running in compatibility mode for Windows XP 3 as administrator?
View 5 Replies
View Related
Sep 15, 2013
Do you need a antivirus and firewall program on a virtual machine?
View 3 Replies
View Related
May 13, 2014
I need some info re creating restore points. In the HP Support Assistant, under updates and tune-up-change tune-up tasks, should the "set restore point" be turned on to "yes" when a tune-up is scheduled? I understand that windows 8.1 automatically sets restore points, but I don't know how or when or where the restore point info is stored. Is the HP Support Assistant "set restore points" the actual method used by Microsoft or an additional option?
View 2 Replies
View Related
Dec 20, 2012
When I run the assistant I got and internal error msg and the program stops running. I tried turn off my antivirus but that didn't work. It reads Internal Error:Error retrieving the scan report. I'm running Windows 7 Home Premium 64 bit.
View 1 Replies
View Related
Aug 17, 2013
I am currently running a pc with Windows 8 Pro activated by KMSPico. Will/should the Win 8.1 update install/work ok on my system when it becomes available?
View 3 Replies
View Related
Dec 13, 2013
My Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
View 5 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Oct 18, 2013
So since upgrading to 8.1, I've been getting messages out the ass about compatibility. One of them is this:
Naturally I know some stuff is gonna have to run in that mode until 8.1's been out for a while, but can I disable this from popping up somehow?
View 9 Replies
View Related
Sep 21, 2013
I'm trying to figure out if my Dell Inspiron N4010 has full compatibility with Windows 8. I downloaded the Windows 8 Upgrade Assistant. The two issues I have are Secure Boot and was touch capabilities my Dell Computer has if I decide to upgrade to Windows 8.
View 1 Replies
View Related
Feb 6, 2013
I have a Sony DVD camera (mdl DVR-HC85) that has USB and firewire cables for connection to a computer for the purpose of transferring video to computer programs. Both cables work fine with Windows XP. However, Windows 8 will not recognize the camera when connected by a USB cable. I was told by Sony that neither Windows Vista, Windows 7 nor Windows 8 will recognize the camera when using a USB cable.
I have a Dell computer with Windows 8 that does not have firewire nor can a firewire card be installed.
View 7 Replies
View Related
May 2, 2013
I am running a Win 7 OS on an SSD and I have some programs installed on a different hard drive. And I want to move this program files folder on the same hard drive but different partition. Is it possible to do this without breaking the program links?
View 9 Replies
View Related
Jan 14, 2014
I'm using IE11 on Windows 8.1 Pro x64. I'm manually adding youtube.com to compatibility view settings and when I close IE and reopen it, the compatibility view settings list is empty.
Is there any way to add a website to compatibility view settings and that it will stick?
View 3 Replies
View Related
Jan 2, 2014
I am trying to change the compatibility to run on an earlier version of windows for an exe file, but when I go to the compatibility tab, theres no bar to change the compatibility.
View 1 Replies
View Related
Jan 16, 2014
According to this link my old Asus P5K-E Wifi Delux board should be compatible:
Windows 8 compatibility for ASUS P5K Deluxe/WiFi-AP AiLifestyle Series ATX - iP35 Motherboard model P5K DELUXE WIFI-AP
However the Asus download site for this board does not list Win 8 as compatible OS - only up to Win 7.
I am thinking of upgrading but don't want to rebuild my PC to do this.
View 3 Replies
View Related
May 8, 2014
I am having the same problem from here: [URL]
But now 10 years later on windows 8.1 ....
View 1 Replies
View Related
Apr 16, 2014
So I have recently switch over to 5ghz wifi, I look up how to check the 5ghz wifi compatibility, it state that if my computer have 802.11a or 802.11n network modes it's compatible to 5ghz wifi. My Windows 8 computer have 802.11n. That should be mean my 5ghz wifi should be showing up, but its not. My Iphone 5S is able to connect to my 5ghz wifi. But my computer is not.
The way I check is type "netsh wlan show drivers" In Cmd, then i look at Radio types supported, it listed as 802.11b, 802.11g, and 802.11n.
View 4 Replies
View Related
Jul 26, 2014
can't change compatibility mode or privilege level in properties After apply settings when i open the applications its again back to normal
View 2 Replies
View Related
Jul 24, 2014
I have a notebook with first generation i7 processor. It comes with windows 7 home premium pre installed and I would like to upgrade it to windows 8 or 8.1. But Intel's latest HD Graphics v15.22.58.64.2993 (2/19/2013) is only compatible with windows 7 as they mentioned. Also my manufacturer was stop providing drivers for the latest operating systems after windows 7 for my model. Can I still update my O/S with the above driver?
View 3 Replies
View Related
Apr 12, 2014
Is it necessary to disable CMS in the bios to fully utilize a UEFI install?
I'm getting conflicting messages from what I am reading, probably.
View 8 Replies
View Related
Mar 1, 2014
another one of those annoying little things, how to stop the annoying Checking Compatibility Ad ons pop up every time I open Firefox. I dont want it, dont need it - so where do I 'switch' it off? I have check through settings cant see it anywhere.
View 3 Replies
View Related
Feb 27, 2014
I now have an Internet connection with my XP. The last challenge is USB. Not sure if I am missing something, but I do not see it in the Setup.
P.S. I started this new thread though I did mention USB in my last.
View 5 Replies
View Related
Sep 3, 2013
How to Get Windows XP Mode on Windows 8 I have Windows XP SP3 already listed in compatibility mode. I am running Windows 8 pro. I really don't understand what they are trying to tell you here. I have never had an older program to run with the compatibility mode anyway.
View 9 Replies
View Related
Jul 18, 2014
Here is an issue I have run into since I side graded to 8.1.Pro on one of my machines. I expect the other machine has the same issue but I mostly use 7 ATM. I have some XP virtual machines that were created by importing the image of XP into VMWare Player and now those VM refuse to run with the following error.
It is obvious the VM was based on the XP machine from Windows 7 Ultimate. How can I fix this as XP Mode does not install and Windows 7 is no longer on this machine so I can't point the program at the file on another OS drive?
View 9 Replies
View Related
Feb 22, 2013
I need to test and run some old Windows XP Programs So I have decided to Use Windows Virtual PC With Windows XP Mode. But I can't get any link to download these two things.
Any link for The Windows Virtual PC and The Windows XP Mode? How to install it?
View 9 Replies
View Related
Jul 31, 2013
If you are still using an XP mode virtual machine but want to upgrade to Windows 8 from W7 you CAN convert the XP mode VM to VMware so you don't have to lose your VM.
View 1 Replies
View Related
May 8, 2013
tell me if there is a version of Windows Movie Maker that will work with Windows 8?
View 3 Replies
View Related
Jun 3, 2013
I have an issue running a program that is contained in a self extracting zip that is supposed to run automatically.
The SFX files unzips the contents to a folder on my hard disk (no problem), but then tries to run another program (installer.exe) that is located in the extracted folder.
The program fromm inside the SFX runs fine if I set the compatibility to XP manually, but the problem is that the the SFX extracts the files to a different location each time it is run.
Is there a global way to make a program (installer.exe) run in compatibility mode wherever it exists?
View 4 Replies
View Related
