How To Check 5Ghz WiFi Compatibility
Apr 16, 2014
So I have recently switch over to 5ghz wifi, I look up how to check the 5ghz wifi compatibility, it state that if my computer have 802.11a or 802.11n network modes it's compatible to 5ghz wifi. My Windows 8 computer have 802.11n. That should be mean my 5ghz wifi should be showing up, but its not. My Iphone 5S is able to connect to my 5ghz wifi. But my computer is not.
The way I check is type "netsh wlan show drivers" In Cmd, then i look at Radio types supported, it listed as 802.11b, 802.11g, and 802.11n.
View 4 Replies
ADVERTISEMENT
Nov 29, 2013
Recently upgraded my laptop to Windows 8.1 and I cannot see any 5Ghz wireless networks, even though they are present (I am able to successfully see and connect using other devices including a Windows 7 laptop). I can see 2.4 Ghz networks and connect no problem. I have upgraded the wifi driver to the latest Windows 8.1 version for the Intel Wireless-N 7260 card, v16.6.0.8 but no luck.
View 9 Replies
View Related
Jun 9, 2012
I have a cisco e4200 and after installing Windows 8 RP, I was unable to find the 5GHz band. I am getting 90Mbs on the 2.4 GHz band and I know my 5Ghz band can give me more. The 5 GHz band is detected on my PC before Windows 8 was installed but I can't find it on my PC now. I have two computers who support the 5 GHz band and both can't find it but did with Windows 7. The 2.4 GHz band and 5 GHz band are separately named so that isn't the problem.
View 6 Replies
View Related
Mar 26, 2014
So iwas wondering if there is a way to check the signal strengh of your wifi by percentage.
View 2 Replies
View Related
Sep 15, 2014
i got usb adapter WDL-U700 dual band 802.11n wireless USB adapter it doesnt seem detect 5ghz wifi
i already checked/change configuration to multimedia/gamig enviroment, channel mode etc
View 9 Replies
View Related
Sep 15, 2014
My PC is unable to detect 5Ghz band where rest of the devices at my home are detecting both the bands.
I have recently bought D-Link dual band router and installed at home. Router is working absolutely fine because I could see my other laptop and Ipad are able to detect both the bands. So that says there no problem with the router configuration. Also the router which I have bought is recently released, so there are no new updates are released yet.
As per the installation guide, 802.11a supports 5Ghz and IEEE 802 11b/g/n supports 2.4 Ghz.
My PC details :
Model : Sony SVF14A190X (an year old laptop)
Operating System : Windows 8.1 Pro, 64 Bit
Network Adaptor drivers: BCM43142 Wireless Network Adapter
Router Details: D-Link DIR-850L VER A.1 wireless AC1200 Dual Band Gigabit Cloud Router.
The network adaptor which my laptop supports IEEE 802 11b/g/n..i.e.2.4 Ghz. I tried installing the Network Adapter drivers in compatibility mode, but that doesn't fix the issue.
When I checked in Command prompt, it says : Radio Types Supported : 802.11n 802.11g 802.11b.
How should I upgarde network drivers to : 802.11n 802.11a 802.11g 802.11b
View 9 Replies
View Related
Jan 16, 2014
According to this link my old Asus P5K-E Wifi Delux board should be compatible:
Windows 8 compatibility for ASUS P5K Deluxe/WiFi-AP AiLifestyle Series ATX - iP35 Motherboard model P5K DELUXE WIFI-AP
However the Asus download site for this board does not list Win 8 as compatible OS - only up to Win 7.
I am thinking of upgrading but don't want to rebuild my PC to do this.
View 3 Replies
View Related
Aug 17, 2013
I am currently running a pc with Windows 8 Pro activated by KMSPico. Will/should the Win 8.1 update install/work ok on my system when it becomes available?
View 3 Replies
View Related
Dec 13, 2013
My Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
View 5 Replies
View Related
Feb 22, 2014
I'm in need of installing IntelliType 6.x to be able to use all functions of my Microsoft Office Keyboard, but the Program Compatibility Assistant doesn't let me, even though I've correctly set the policy rules (as described here) and even turned off the Diagnostic Policy Service.
The only options I have is "get help online", which tells me that I should download the latest version, and "close" which doesn't run the installer at all.
I understand the program might not work, but Microsoft should at least allow people to bypass their "Let Microsoft decide for you" BS (which I've met like six billion times by now) and let the idiots (i.e. me) take the risk of ruining their computer if they want to.
View 8 Replies
View Related
Nov 25, 2012
I have a simple shortcut file (.lnk) which I want to make "Always run as administrator", but I can't see the compatibility tab?
View 6 Replies
View Related
Jul 16, 2014
I'm trying to set up Virtual PC 2007 SP1 on Windows 8.1 Pro with Update.
By default, the Program Compatibility Assistant blocks this with the following notice:
The easy way to get around this is to rename the installer and then rename the main EXE that gets installed. There are a few other tricks (including replacing VMM.sys) and then it works. However, the EXE rename appears to be affecting my ability to double-click on a VM to start it so I thought it would be nice to just disable PCA altogether so I don't have to rename the EXE. Following the various instructions (including some from Microsoft), I haven't been able to disable PCA. Specifically, I have:
1) Attempted to create an EXE exclusion by editing the registry and creating a REG_MULTI_SZ value called "ExecutablesToExclude" with the full path to the Virtual PC.exe excutable in the following registry locations:- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionAppCompatFlagsCompatibility Assistant- HKLMSOFTWAREMicrosoftWindows NTCurrentVersionCompatibility Assistant
2) Changed the following Group Policy settings:- Computer Configuration > Administrative Templates > Windows Components > Application Compatibility:Enabled "Turn off Application Compatibility Engine"Enabled "Turn off Program Compatibility Assistant"- User Configuration > Administrative Templates > Windows Components > Application CompatibilityEnabled "Turn off Program Compatibility Assistant"
3) Stopped and disabled the following services:- Application Experience- Diagnostic Policy Service- Program Compatibility Assistance Service
Despite doing all of this, I keep getting the error popup above. It keeps coming back from the dead like {insert your favorite horror movie villain here}.
In the Event Viewer logs, I also see a "Critical" error (event ID 2) from source "ApplicationExperienceInfrastucture" that says "The application (Virtual PC 2007 SP1, from vendor Microsoft) was hard-blocked and raised the following: Virtual PC 2007 SP1 is not supported on this version of Windows. For more information, contact Microsoft."
I'm guessing that Microsoft changed PCA in the Windows 8.1 Update but hasn't documented the changes yet. How to fully disable PCA?
View 8 Replies
View Related
Oct 18, 2013
So since upgrading to 8.1, I've been getting messages out the ass about compatibility. One of them is this:
Naturally I know some stuff is gonna have to run in that mode until 8.1's been out for a while, but can I disable this from popping up somehow?
View 9 Replies
View Related
Sep 21, 2013
I'm trying to figure out if my Dell Inspiron N4010 has full compatibility with Windows 8. I downloaded the Windows 8 Upgrade Assistant. The two issues I have are Secure Boot and was touch capabilities my Dell Computer has if I decide to upgrade to Windows 8.
View 1 Replies
View Related
Feb 6, 2013
I have a Sony DVD camera (mdl DVR-HC85) that has USB and firewire cables for connection to a computer for the purpose of transferring video to computer programs. Both cables work fine with Windows XP. However, Windows 8 will not recognize the camera when connected by a USB cable. I was told by Sony that neither Windows Vista, Windows 7 nor Windows 8 will recognize the camera when using a USB cable.
I have a Dell computer with Windows 8 that does not have firewire nor can a firewire card be installed.
View 7 Replies
View Related
Jul 26, 2014
can't change compatibility mode or privilege level in properties After apply settings when i open the applications its again back to normal
View 2 Replies
View Related
Jul 24, 2014
I have a notebook with first generation i7 processor. It comes with windows 7 home premium pre installed and I would like to upgrade it to windows 8 or 8.1. But Intel's latest HD Graphics v15.22.58.64.2993 (2/19/2013) is only compatible with windows 7 as they mentioned. Also my manufacturer was stop providing drivers for the latest operating systems after windows 7 for my model. Can I still update my O/S with the above driver?
View 3 Replies
View Related
Jan 21, 2014
I've installed Quicken 2004 on Windows 8.1 in compatibility mode for Windows XP 3 to run as administrator. Everything seems to work well. All my data appears to have been restored including Home Inventory. I can download bank data.
Automatic backup works. I tested this by changing the system date to trigger the backup.
The infuriating thing is I cannot do a manual backup from the file menu. The dialogue box opens. I can complete the relevant fields but when I click OK the program freezes. There are no error messages.
Not sure if this is a Windows issue e.g. permissions or Quicken issue e.g looking for a file that doesn't exist. I have checked the 'Ready for archive' box of the folders, sub-folders, and files property boxes.
Are there any settings in Win 8.1 that I need to change to allow a program to write to a drive when it is running in compatibility mode for Windows XP 3 as administrator?
View 5 Replies
View Related
Apr 12, 2014
Is it necessary to disable CMS in the bios to fully utilize a UEFI install?
I'm getting conflicting messages from what I am reading, probably.
View 8 Replies
View Related
Jan 14, 2014
I'm using IE11 on Windows 8.1 Pro x64. I'm manually adding youtube.com to compatibility view settings and when I close IE and reopen it, the compatibility view settings list is empty.
Is there any way to add a website to compatibility view settings and that it will stick?
View 3 Replies
View Related
Apr 27, 2014
In windows 8.1, I installed the Lenovo Power Manager which is not yet available for this system, and I did it running it in compatibility mode, as described in the next link
Lenovo forums : Lenovo Power Manager in Windows 8 - Page 3 - Lenovo Community
and it got installed correctly, and seemed to work asking for a reboot that I did
The problem: I run into a BSOD and I believe it is due to this software (safe mode works ok)
So, as I try to unistall, and the uninstaller is called from "ADD or REMOVE PROGRAMS", all I get is again the message: "Warning : Cannot run on this system"
And of course, here there is not compatibility mode wizard .. How can I complete uninstall and clear this?
View 2 Replies
View Related
Mar 1, 2014
another one of those annoying little things, how to stop the annoying Checking Compatibility Ad ons pop up every time I open Firefox. I dont want it, dont need it - so where do I 'switch' it off? I have check through settings cant see it anywhere.
View 3 Replies
View Related
Jan 2, 2014
I am trying to change the compatibility to run on an earlier version of windows for an exe file, but when I go to the compatibility tab, theres no bar to change the compatibility.
View 1 Replies
View Related
May 8, 2013
tell me if there is a version of Windows Movie Maker that will work with Windows 8?
View 3 Replies
View Related
Jun 3, 2013
I have an issue running a program that is contained in a self extracting zip that is supposed to run automatically.
The SFX files unzips the contents to a folder on my hard disk (no problem), but then tries to run another program (installer.exe) that is located in the extracted folder.
The program fromm inside the SFX runs fine if I set the compatibility to XP manually, but the problem is that the the SFX extracts the files to a different location each time it is run.
Is there a global way to make a program (installer.exe) run in compatibility mode wherever it exists?
View 4 Replies
View Related
Dec 30, 2013
any reasons for that and how do i check if my gpu and ram is okay and is not causing this trouble!
View 2 Replies
View Related
Aug 18, 2014
We have a new Windows 8 pc and have a password set on it to stop our children from going on it but we have a feeling 1 of them has and also he has worked out the password.
So is there a way to check in settings what time the pc was turned on and off?
i have looked in settings but can not see anything that would tell us.
View 7 Replies
View Related
Jun 18, 2013
where is spell check in windows 8? or what ever you call it now. how do I correct my spelling in email or anywhere for that manner? and does windows 8 have copy and paste? but it's the spelling thing I can't find and need.
View 1 Replies
View Related
Jun 27, 2013
Is it possible to use manual spell check in windows 8? if so, how do I turn off the auto spell thingy and set up the manual spell check.
What about that ispell software. is it safe? is it full of trash like extra tool bars? (which I don't need) i'm getting to the point that i'm getting nervious about ordering any free software online.
View 2 Replies
View Related
Oct 25, 2012
For those that select the download option for Win 8 i have a question. Before burning it on a DVD will there be a way to check if the download was OK and not waste a DVD if there is a problem with it?
View 1 Replies
View Related
Mar 31, 2014
I updated my windows 7 into windows 8 then I installed some drivers from the cd but I think some were not compatible with windows 8? How do I check for the missing drivers and how do I download them?
I also noticed that my pc got slower instead of faster and the usb file moving is much slower now even if my laptop has usb 3.0?
View 5 Replies
View Related
