I updated my windows 7 into windows 8 then I installed some drivers from the cd but I think some were not compatible with windows 8? How do I check for the missing drivers and how do I download them?
I also noticed that my pc got slower instead of faster and the usb file moving is much slower now even if my laptop has usb 3.0?
I do not want to check the speed on a USB 3.0 flash drive or external drive. I need to know the speed of the port itself is transferring at full 3.0 capacity.
What I have is an external mechanical USB 3.0 hard drive. I know it's a 7200 rpm drive. My 3.0 USB ports on my laptop are not using the blue USB plastic to denote 3.0 speeds, they use black plastic.
Therefore I am not confidant they are running at full 3.0 speeds. I want a tool that will measure the port speeds independently of any drive or device on the USB port.
I did find this but I do not have any Advanced tab to check for or to reset the device to Super
There are four USB specs: 1.0, 1.1, 2.0, and 3.0. But to confuse things, each USB spec has more than one data rate assigned to it. Those rates are "low", "full", "high", and "super."
Therefore, benchmarking data throughput solely on speed is not necessarily conclusive as to what the actual spec being used. Thus, a USB 3.0 port may not be actually running at a "super" rating but at a "High" rating instead.
On a Windows machine, check the data rating of the USB root/hub - Goto: Device Manager --> USB Controllers --> USB Root Hub (Right Click) --> Properties --> Advanced (Tab).
It should tell you the data rating for the USB hub/port. Once you know that, you'll know the maximum throughput from the computer's POV.
Low = 1.5 Mbps Full = 12 Mbps High = 480 Mbps Super = 5 Gbps
Windows - Verifying USB connection speed (USB 3 or USB 2?) - Super User
Here is what the listing looks like in device manager Under the two 3.0 USB hubs at the top, there is no advanced tab.
In windows 7 missing drivers were automatically install upon restart,is this missing in win 8.1?
View 4 Replies View RelatedThis issue has been an ongoing one about close to a year after i purchased my PC. It is an ASUS PC when i go to the support site for updates in the past and now for my model i see BIOS updates.
Lately they have been all CAP Bios's,any time i try to use these type of BIOS's it is not recognized in the BIOS utility in the BIOS screen.
My last BIOS update was a ROM BIOS it worked fine, now all the future BIOS updates on ASUS's site are CAP.
If I try to rename the BIOS to a ROM i get an error "image integrity check failed". Of course i have spoken to ASUS Support in the past and now over the phone also, but no luck.
I do know it can be risky updating a BIOS if anything goes wrong the PC will become unstable or unusable.
Most will say unless there is not something in the BIOS update that will make improvements to the PC.
It has been 4 or so BIOS updates since one i have on this PC so far on ASUS's site.
I believe my motherboard is not compatible with a CAP BIOS, but why ASUS lists them for my PC.
I built a computer recently. Since day one I get BSODs but the drivers, and Bug/Checks listed are never the same.I was thinking it couldn't be a single device or driver so I've:
Replaced the MOBO.
Repair Installed the OS.
Replaced the RAM.
It BSOD'd multiple times between each change.
The only things I've run are IE/FF and Ableton Live 9. Ableton is usually running during the BSOD but it was not the last time.
I bought myself new SSD disc. I wanted to make that SSD primary so I can get rid off my old 70GB HDD disk. I used software to clone system (windows 8.1) from HDD to SSD. Everything worked perfectly to the point when I wanted to start the system. I noticed that my second HDD (with 1TB for data etc.) was set in bios with boot priority(1.) and it should have that missing bootmgr. Well I unpluged my HDD with windows and the second HDD and went to BIOS. I set boot priroity for my SSD and when I wanted to go to windows it showed me "Bootmgr is missing ...". Well so I decided to plug my second HDD back and went to windows.
I used Microsoft Store to copy my windows installation to my USB flash disc so I can repair it with that. After restart I set my usb flash disc as primary/boot priority so it will be booted at first and I can repair it, but it always (seems like) skip that USB and run my SSD and my system start up, so I dont have any chance to go that windows screen with options to repair and so on. If I hit F8 immediately after my USB flash disc boot it shows me some options, but those aren't useful for fixing my problems with bootmgr.
So now I'm in state when I can't boot my system without the USB flash disc. If I unplug it and restart the computer it shows me "problem with bootmgr is missing...".
I have just bought a diskless XPS1645 and have clean-installed Win8.1. All is well, apart from...
1. Device Manager shows two Base System Devices that remain 'undriven' - what the items may be and what drivers are required?
2. The volume and DVD eject buttons don't. (The Wireless button definitely does.)
i have been having this problem for a week now until a friend told me about your form three of my partitions are missing from my computer and this what it shows me in the device manager
View 5 Replies View RelatedWhy does every new O/S decide to remove undesired drivers and software? Same thing happened when moving from XP to Vista, and once you had Vista you sure had to get out of it!
Win 8 Pro N has physically deleted 3 multimedia controller drivers;
1. Type: Other unit, Mfg: Unknown, Location: PCI-bus 1, unit 0, function 0
2. Type: Other unit, Mfg: Unknown, Location: PCI-bus 1, unit 2, function 0
3. Type: Other unit, Mfg: Unknown, Location: On Microsoft ACPI-compliant system
Also, why hasn't Microsoft Fixit 50548 been adapted for Win 8 (i e possibillity to print picture or graphics to printer by right-clicking on file, then left-klick on Print on Menu that appeared. Also works to list contents of a drive on a printer output.
New printers do not display in Windows 8.1 Devices and Printers (no icon):
New Dell, clean install:
- Reinstalled Dell Factory Image
- Updated to Windows 8.1
- Installed Office 2013
- Added BUILT-IN Windows Driver for LaserJet 5P/5MP
- Added Epson driver for Windows 8 64 bit from Epson website
Neither printer shows in Devices and Printers.
Rebooted. Stopped and started print spooler. Checked registry and all printers, including the new ones, appear to be listed in all the correct registry areas.
Open Notepad, select Print, both printers are listed.
Both printers print. When in Notepad, select Print, I can right click on the printer, select properties, and control the printer, print test pages, change drivers and preferences, etc.
The ONLY PROBLEM is the printers do not show in Devices and Printers, so I cannot control them from there.
I get a black screen after the loading screen when I boot up my computer. To fix this problem, I decided to do a dirty install, but I stumbled upon a problem. I have 2 Crucial 64GB SSDs that I put together as one, making my C: Disk, but I didn't see it in the Volume List. I only see what was Drive D:, my 1TB Seagate HDD, which, supposedly, took my SSDs' place as Drive C:.
I've unplugged the SSDs and booted up with only one plugged in, and made the Primary Boot Device "Removable Disk", but when I boot up, I get an error message saying "BOOTMGR is missing". The same thing happened when I did the same with the other SSD. It can be deduced that both of the SSDs have to work together as a whole to function.
Then, I unplugged the 1TB HDD and tried again. When I did a chkdsk for Drive C:, I got a message saying, "The system cannot find the drive specified". From this, it is obvious that the 2 SSDs (which are the actual C: Drives) aren't being detected by my computer, but the 1TB (Drive D: ) is being detected.
After uncovering this problem, I think this may be the fault that is giving me the black screen after boot.
I have an Asus PC running W864, I have a Seagate 2 TB Harddrive and I have two 2TB Hard drive connected by USB.
Sometimes when I leave my PC running while doing other things I come back to it after a few hours and the PC is showing a black screen the message "BOOTMGR is missing. Press Ctrl Alt Del to restart" This happens about once or twice a month, I can see no pattern or event that triggers it.
When I press Ctrl Alt Del the PC restarts and comes back to the same message.
If I reboot to a bootable repair disk or Windows 8 install disk my OS and Hard drive are not found, but my USB connected drives are.
I have to turn of my PC completely, I take out the plug, and switch it back on, sometimes it reboots properly to the Start screen but sometimes it just goes back to the black screen with the BOOTMGR is missing. Press Ctrl Alt Del to restart message.
What seems to work always is if I turn off the 2 USB attached drives turn off the PC then restart, that works 100% of the time as far as I can recall.
I suspect my had drive is faulty but I have taken the PC to the supplier and their tests show all is okay, even when I run Seatools for Windows it checks out 100%.
Seatools for DOS does not find the Harddrive, I believe this is a W7/8 issue.
I have repaired the BOOTMGR using the process shown here, How to fix bootmgr is missing in Windows 8 But since Windows 8 disk found the Harddrive I suspect the PC would have booted okay anyway.
Active SMART says it is okay and Event Viewer in Windows 8 does not show any related errors.
I have a new desktop. A dell Precision T7610 with win 8.1 pro x64. I installed APC Powerchute personal edition last weekend. Went out of town and last night came home and noticed I had no power icon on the task bar. I am not sure if this started right away or not. I do like to change the power plan from balanced to high power depending on what I am doing. I can do through control panel, but I figure I should fix why I do not have the icon on the task bar now.
I tired uninstalling powerchute and it failed. I then re-installed and installed. Now power icon.
In the task bar, customize icons, and then turn systems icons on and off, the power icon is set to off but I cannot set it to on. Under customize icons, if I try to set to show icons, it says it is not active.
unfortunately I do not have a restore point before last night. Not sure if I never had any (new machine) or if some how they got deleted.
I am trying to install a graphics card in my desktop pc. The heat sink on the card blocks the SATA port that the DVD drive is plugged into (SATA1) so I've switched the DVD drive to SATA2. The drive is now showing as connected to port2 in the BIOS, but in windows (Windows 8 64-bit) it isn't detecting the DVD drive at all? I've seen other posts about this on the internet suggesting to add a line to the registry, but I've done that and it doesn't solve the problem.
View 9 Replies View Relatedwhere is spell check in windows 8? or what ever you call it now. how do I correct my spelling in email or anywhere for that manner? and does windows 8 have copy and paste? but it's the spelling thing I can't find and need.
View 1 Replies View RelatedIs it possible to use manual spell check in windows 8? if so, how do I turn off the auto spell thingy and set up the manual spell check.
What about that ispell software. is it safe? is it full of trash like extra tool bars? (which I don't need) i'm getting to the point that i'm getting nervious about ordering any free software online.
For those that select the download option for Win 8 i have a question. Before burning it on a DVD will there be a way to check if the download was OK and not waste a DVD if there is a problem with it?
View 1 Replies View RelatedMy PC just BSOD while playing games but this was only after it crashed to black screen unresponsiveness. A couple hours after the first crash (maybe after 1.5 hrs of gaming once again) it BSOD with the "Kernel Security Check Failure" error.
SF diagnostic included below:
As the title states, instead of the check marks and icons, the start menu is now displaying these [].
Start Menu
OR
04f9646fbc4fe1d4e65a090ece308649.png
The same thing is also happening to me in my WiFi tab
OR
1367549e22be6359229a57918ca4853f.png
It used to be displaying correctly, but now it's not.
PC Specs:
OR
8f32910818e0f07143a761910f160963.png
I Get This BSOD Everyday. Is It Because of The Old Firmware of My SSD?
View 5 Replies View RelatedI am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:
Windows 8.1 Update - Check backup disk space - Microsoft Community
Windows 8.1, can't remove "Check backup disk space" error in action center -
I have been using windows 8.1 pro for a while without any trouble, but from few days ago I seems to be getting bsod screens with Kernel Security Check Failure error 4-5 times a day now
Nothing is overclocked btw.
I attached the zip from diagnostic tool.
Been having this problem all of a sudden and blue screen keep happening.
View 1 Replies View RelatedI can't seem to figure out the pattern here with programs/actions despite the consistent crashing.
View 3 Replies View RelatedAfter upgrading from 4gb OEM RAM to 8gb Corsair CMSO8GX3M2A1333C9 I get BSOD with kernel_security_check_failure message just as Windows attempts to load. This happens with memory sticks in either slot. Testing memory with Memtest continually hangs on test #2. Memory was tested with Memtest in another computer and no errors were found. Incompatible memory or something else?
View 5 Replies View RelatedOn the laptop of my daughter I have installed windows 8.1. since a couple of months my daughtrer has bsod problems.
The message is; kernel security check failure
I uploaded SF_Diagnostic_Tool file.
any reasons for that and how do i check if my gpu and ram is okay and is not causing this trouble!
View 2 Replies View RelatedWe have a new Windows 8 pc and have a password set on it to stop our children from going on it but we have a feeling 1 of them has and also he has worked out the password.
So is there a way to check in settings what time the pc was turned on and off?
i have looked in settings but can not see anything that would tell us.
I am dual booting Windows 7 with Windows 8.1, and I went to reboot to go into Windows 7 and it gave me a BSOD. This is NOT the first time this has happened I had to leave Windows 8 in the past because of constant crashing. I am tired of this and I want an explanation.
System Specs:
GPU - Radeon HD 7850 2GB
CPU - AMD FX 8150 Eight-Core 3.6Ghz
RAM - Vengeance DDR3 1600 MHz 8Gb - GSkill Ripjaws DDR3 1600MHz 8Gb = 16GB Total
MotherBoard - BIOSTAR TA970XE AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS
PSU - CoolerMaster 700W
HDD - Samsung 1TB 7200 RPM
DVD/BluRay - ASUS Black 12X BD-ROM 16X DVD-ROM 48X CD-ROM SATA
Chassis - ThermalTake Chaser MK-I
I made a partition of 250GB for Windows 8. I don't know what else to say here. Windows 8 seems to just crash a lot, it happened on an OLDER computer of mine, but this is a brand new custom build. I can't even comprehend why it's crashing.
Also I guess it's worth noting I installed this today and installed windows updates today as well.
I forgot to mention I was using COMODO Anti-Virus, I saw in a previous post about my exact error that it had something to do with Comodo. I have since uninstalled that.
Also here is a preview of the error:
The computer has rebooted from a bugcheck. The bugcheck was: 0xc0000018 (0xffffc0000019c5d0, 0xffffc000009ea9f0, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 101113-34796-01.
So I have recently switch over to 5ghz wifi, I look up how to check the 5ghz wifi compatibility, it state that if my computer have 802.11a or 802.11n network modes it's compatible to 5ghz wifi. My Windows 8 computer have 802.11n. That should be mean my 5ghz wifi should be showing up, but its not. My Iphone 5S is able to connect to my 5ghz wifi. But my computer is not.
The way I check is type "netsh wlan show drivers" In Cmd, then i look at Radio types supported, it listed as 802.11b, 802.11g, and 802.11n.
How do I contact Microsoft regarding an order I placed a few weeks ago for 1 DVD Windows 8 DVD Disk.
View 3 Replies View Related