recently my PC updated when I didn't want it to and now it installed the update 1 "patch" for 8.1 and now my internet driver is screwed up. I tried to remove it now but the network still won't connect. My network driver is the Killer network. I also tried to restore but apparently my PC never made an automatic save. Now what do I do?
View 2 RepliesI have a Dell Inspiron 660s running Windows 8.1, and I just did a full boot of Ubuntu 13.10 onto a Dell Optiplex 330 that was previously running Windows XP. My goal is to connect to the internet by using the 660s as a bridge to the internet by connecting the two computers with an ethernet cable.
The level of difficulty: My internet requires you to log into it on a separate browser log in page similar to those in airports and other public Wi-Fi access points except that it requires a username and password to log in. My theory is that if I first log in to the internet on my Windows machine then I can connect to it by simply opening a connection from the Ubuntu OS to the Windows OS. Am I off track here or am I on the right track?
I have a Lenovo Z580 btw (since there are so many problems with Lenovo). What to do now I have to resort using my phone to do work as I have no internet access.
I am really clueless on what to do now I have to resort using my phone to do work as I have no internet access.
Stuff I've done is power management to max performance, installed latest 8.1 drivers from Lenovo and intel site, uninstall driver in safe mode etc...
After the new windows 8.1 update (which inclided the home screen power off button) a net problem came out. In my wifi indication, it sais "limited", but when i enter the web, i can search in the internet without probs. When i go to net. and sharing center, i cant see any network. On my other laptop (win7) it shows the connection normally.
View 1 Replies View RelatedAfter updating to 8.1 from 8, svchost.exe is using a massive amount of my bandwidth.
I know svchost.exe is a collection of services, but what I want to know is how I can figure out what specifally is using up all my bandwidth.
I did make sure to disable live tile updating. Doesn't happen if i boot into safe mode.
I have a neighbor who has an OPEN network called @HOMED689 . For some reason my Windows 8 machines keep trying to connect to this SSID automatically.
I've never tried to connect to it. Once it's connected however, with limited connectivity, I don't have the ability to right click on it and say "Forget this network" or do anything to it such as when I connect to another wireless it says:
Show Estimated Data Usage
Set as Metered Connect
Forget this Network
View Connection Properties
Nothing.
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies View RelatedThis is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
I have connected my ipod touch 4g to my new windows 8 laptop via bluetooth. It shows up in both the ipod and in the windows settings as being connected. However, once connected, i am unable to do anything with the connection.
There is no Windows tile showing the ipod, no obvious options in the ipod for how I can do anything with the connection, nothing. What am I supposed to be able to do once I have connected them via bluetooth? Is there a step I'm missing? I've read you can stream podcasts to the computer, for example, but there's supposed to be a windows tile showing the ipod which I'm definitely not getting either in the start menu or when I search.
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
I have two desktop PCs connected to my router, one named Mirabel running Win7 Pro, and one named Bessie running Win Server 2008 R2 (both 64-bit). These can see each other quite happily.
I just installed Windows 8.1 Pro 64-bit on my Dell Vostro 3750 lap top, which I named Rosie, but am having problems connecting to the other machines.
When I go to the Network node in Windows Explorer on Rosie, I can't see either of the other two machines, but if I type Bessie in the address bar, it shows me the two drives that are shared. However, if I try and explore either of these, I get the following error...
The laptop is part of a workgroup, imaginatively named "Workgroup" as are the other two machines...
I changed the properties of the TCP/IP v4 to match the ones on the other two machines (with a different IP address of course) but this didn't work.
The odd thing is that I can browse the shared drives on Mirabel without any problem. In case it's relevant, both desktop machines can browse Rosie without problems. Windows 8 has changed so much from Win7, and it's wasting a lot of time trying to get it set up.
I'm using Windows 8.1 for couple days and I connect to the internet using a pppoe connection,at first dial ALWAYS GOT
THIS ERROR : "The modem or other connecting device has reported an error"
AT SECOND always works.
I brought my laptop to work and wanted to connect to my work's network so I could access our shared networks. In the past I was able to log into my work's domain, nahrc, with my user name and password via the ctrl+alt+dlt method fromt he log on screen. I can plug in the ethernet cable into my laptop, and the nahrc network appears in the wired connections area, but I can't seem to connect/access our shared drives. Is it possible to log into my laptop like you could in windows 7 and access my account, or is this just not possible anymore.
View 1 Replies View RelatedI am connected to my router by a Ethernet cable. can i still connect to my printer wireless?
View 7 Replies View RelatedSometimes when I boot up my computer the wired network doesn't connect. I cannot connect to it unless I reboot my computer. Then iti works fine. The connection seems random and sometimes it works and other times it doesn't. If it does connect there is never a crash or error of it not working.
I have the asus P8Z77-V PRO
I disabled my wireless adapter to try but still same issues.
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies View RelatedFor some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies View RelatedI bought Windows 8 when it was released, like most people I liked the performance upgrades and other stuff, but that was about it. Months later I installed Windows 7 again, but it just felt old and there were a few things I missed about Windows 8, anyway yesterday I decided to install Windows 8 again (8.1) but I'm having a problem since I did.
Whenever I connected an external hard drive via USB3.0, Wi-Fi would disconnect. I searched this over to see if other people were having the same issue, there were some guys but they were using a USB based Wi-Fi adapter, I'm using the one in the laptop.
DETAILS
Asus U47A
Wi-Fi adapter: Intel Centrino Wireless-N 2230
External Hard Drive: Seagate Expansion Portable Drive (500GB, USB3.0)
OS: Windows 8.1 Pro, All updates (Problem happens with or without updates, with original (Asus) or Windows supplied drivers)
I was loosing the Wi-Fi connection and I didn't know why, it was very intermitent, it would work for 10 minutes and then not, I then downloaded new drivers, directly from Intel, Asus and then using the Windows Update, it didn't work in neither case.
I was watching youtube and noticed the signal was good, it was working fine, and realised that the Seagate HDD was disconnected, I had just isolated the problem.
I tried to replicate it and indeed it happened, whenever I connected the drive, signal would be lost. At first I thought it might be a hardware-based issue, but it was working fine with Windows 7, so I decided to play with it a little more. I found out that Wi-Fi connection wasn't being lost, but rather loosing power, Windows would only display the closest routers (two, out of five or six that are in range). So I enabled internet sharing in my cell phone, guess what? It worked fine, signal was strong.
I connected the Seagate drive to a USB2.0 port, no problem. Then connected a different HDD (USB2.0) to the USB3.0 port, no problem.
So the thing is that Wi-Fi loses power when the USB3.0 HDD is connected to the USB3.0 port.
Have a question regarding "Local Account". I'm having problems connecting to the Win 8 laptop from Win 7 as it will not accept my sign in credentials. With that, am I to assume that this is because the credential aren't "Local", and thus this is what this is for???
It will not accept the "Microsoft" account I use to log into Win 8 laptop.
With that, if I choose to go with the "local account" can I easily switch back to the Microsoft one?
I have a friend who has win7, which makes the hotspot that I can not see on my Windows 8 and all other friends who are on win7 can see the connection.
View 3 Replies View RelatedI upgraded my Windows 8 PC to Windows 8.1 yesterday and I am unable to reconnect it to my Homegroup (comprising of 2 Win 7 machines) or in fact get any communication between the Win 8.1 machine and the Win 7 machines. Prior to upgrading the Win 8.1 was part of the Homegroup. From the Win 8.1 machine: it initially detects the Homegroup as shown below,
it then asks me to choose file types to share and then asks for the Homegroup password which is when I hit problems as shown below:
In advanced sharing I have all 3 network types set to discoverable.
As part of the debugging process I discovered that the Win 8.1 was not time synced to the others, when I attempted to sync the time from the various time servers in the Windows drop down box I found the Win 8.1 encountered errors and would not sync. I was eventually able to sync it to time-b.nist.gov.
The other odd thing is that the keyboard does not work properly, specifically the characters above the numbers on the numeric keys are not correct, for example press shift 2 gives # instead of @. Have a suspicion these 2 things are somehow related.
I have a Asus Laptop operating with Windows 8.1. It connects to wifi but none of the desktop icons can get to the Internet. Meanwhile most window tiles in the start menu have Internet access . For example I have the application "MegaTube" and that application has access to the Internet. As well as the weather app, which updates when connected to the Internet.
View 3 Replies View RelatedI face this BSOD on my windows 8.1. Please read the dmp.file
View 3 Replies View RelatedI have just installed windows 8.Whenever I connect the computer to the internet the windows gets crashed and computer restarts. Remedy if any?
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies View RelatedI am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I connected my pc to the internet and after 10 secs it shows BSOD with bad pool caller.
View 2 Replies View RelatedI've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
View 9 Replies View Related