recently my tiles like the Windows 8 Store, Kindle Reader and Xbox One Smartglass won't connect to the internet. I did some research and found that it was because the "Use a proxy server for LAN" keeps checking itself. Once I un-check this they work, but not long after that box automatically checks itself again.
View 1 Repliesand don't know what to do.
Dell Inspiron 660 S Windows 8.1
I don't know what happened but today when I tried to enter IE I received this message:
The proxy server isn't responding. Check your proxy settings. Go to Tools > Internet Options > Connections. If you are on a LAN, click "LAN settings". Make sure your firewall settings aren't blocking your web access.
If I go to LAN and remove the block with a check beside the proxy sever IE starts, however, if I log off and try to reenter the proxy server box has a check mark.
I have strange issue with Windows 8.1 x64 Pro with Media Center. Since it was upgraded from 8, there have been issues with Software Store. Despite internet connection working fine with Firefox and other applications, Store would not connect to the internet. After long investigation I found out that Proxy server setting in Control Panel -> Internet Options -> Connections -> LAN Settings must be disabled in order to get Store working again. For some reason proxy server only stays disabled for the current session, which means when the windows is rebooted it comes back enabled again. My question is how to make it stay permanently disabled, as I don't use any proxy.
View 8 Replies View RelatedI have win 8 in my lappy... I was able to run internet but now it is showing that "proxy server unable to connect ".. then I checked my ip settings the default gateway was gone.now every time I wanted to save it, it was erased from there...
View 2 Replies View RelatedAfter I DLed GIMP I noticed that several other apps had installed themselves. Just your run-of-the-mill adware opening random popups asking to scan my system for this and that and trying to sell junk. I used Malwarebytes and AdAware. Don't get me started on AdAware, as I think they've been overrun by monkeys. Anywho, AdAware doesn't find anything anymore, whereas Malwarebytes found 40 something issues. It now says my system is clean.
Now the strange thing is, my problem didn't occur until after I deleted the extra programs from my system. I have yet to locate GIMP at all on my system. Firefox and Chrome were both rendered useless, as they were "unable to connect to the proxy server." The store page in Steam gives me nothing but a "-130 error."
The plot thickens... My computer IS connected to the internet, as I am able to play games online through Steam, and I was able to disable the proxy server setting in Firefox. However, when I attempt to disable my system's proxy server settings, it reverts back the second I hit Okay.
I have changed the registry setting from 03(proxy) to 09(auto-detect)....No dice. That change sticks, but appears to change nothing. I have also disabled other proxy settings in the registry that had been activated, changing 1s to 0s. Those changes stick, too, but still nothing.
The only constant is the phrase "some settings are controlled by your systems administrator" plastered in Internet Options. I am logged in as administrator and have even tried merging Brink's .reg file to remove windows update policies.
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)
I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (Windows 8 Enterprise) both enabled "Shareable and Visible".
View from W2003 -- can see and access disks C,D, and F on Windows 8 Computer
View from Windows 8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but Windows 8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't work at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of support ever.
I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.
Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.
I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.
(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !!)
Note -- Other W7 / Linux / XP computers connected to this SAME LAN (currently switched off) have NO problem accessing the server -- It's just this Windows 8 Machine (Windows 8 x-64 Enterprise version).
I was wondering if it is possible to use a URL instead of an IP address for a HTTP proxy? All HTTP proxies I have seen have all been IP addresses and I want to set one up on my Desktop at home and use one of my URL's as the proxy address. Isthis possible or does it have to be an IP?
View 1 Replies View RelatedWhat is best way to ck CPU speeds ??? Do I need a 3rd party program?
View 9 Replies View RelatedSpell checking do not work on Firefox in the Windows 8 x64. I mean back when I was using Win XP (for 10 years), the spell checking worked in every browser. I am talking about that red underlining appearing when a word is misspelt. Been using Windows 8 x64 for two month now and didn't see that working on latest FF.
View 5 Replies View RelatedMy computer is a windows 8 touchsmart hp.
It keeps saying proxy error unable to connect to the proxy but I've spoken tothe staff at virgin and they are saying its not a proxy error.
Ive tried the 74.125.225.179 and google loads just fine.
Turned on my laptop earlier, and tried checking for updates. Saw around 250MB worth of updates, clicked install, and Windows Update locked up shortly afterwards. Restarted Explorer, and Windows Update still wasn't working, so I rebooted.
Tried checking for updates again, and now I'm stuck on that screen (the progress bar moves, but it's seemingly not finding updates).
What caused WU to freeze. My desktop (set up in basically the same exact way) handled it fine. I tried a Disk Cleanup (to cleanup WU files) and a reboot to no avail.
When I'm installing Win 8.1 Pro, it starts automatically "Checking for Updates" near the end of install process. That is before getting to Windows Start screen/Desktop.
I'm using a autounattend.xml file, but didn't find a way to skip "Checking for Updates" yet. It is the only answer I could not automate. Trying to do that without user intervention. Just by means of autounattend.xml file.
IE 11 tells me that my IE proxy is set to 127.0.0.1:9666, so I can't browse websites.
And in the internet options, Lan setting , proxy is disabled....
And in the registry, HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet SettingsProxyServer is set to 127.0.0.1:9666, I can't change it , even i delete it , it will appear again when i reopen the registry editor...
Something keeps changing my proxy settings. Every time I change it to "Automatically detect settings", something is changing it to "Use a proxy server for your LAN..."
View 9 Replies View RelatedI deselected "check my spelling as type" in Options.
View 2 Replies View RelatedI seem to recall that when you change the proxy settings for Internet Explorer, it's not just IE you are changing. IEs proxy settings are somehow the proxy settings for other apps and the OS as well. What connections are affected if I add a proxy in IE?
View 1 Replies View RelatedHaving Internet connection issues--sometimes I can connect, but only get "2 bars," other times nothing. I am using a wireless router, and have another computer connected to it, and I get the internet with no problems on the other one. Couldn't download TSG SysInfo on computer with problem.
Microsoft Windows 8.1 Home Premium
Dell All-In-One Desktop Computer
Intel Core i3-3240T CPU @2,90GHz 2.90 GHz
4 installed RAM
64-bit operating system, x64-based processor
Antivirus: avast! Antivirus, Updated and Enabled
Steps I have taken: Troubleshooted connection, and received the following error: windows could not automatically detect network's proxy settings. Ran "network troubleshooter" and I think it reset the connection and said all was fine.
So I'm rolling along the internet and I start noticing that the wifi bars in the lower corner have gone down to 4. My internet is running slower and when I log on and play online games, the local server which gave me a 50 ping is now jumped up to about 300-800 easily...
So I run trouble shooter (and malware bytes) and this gem pops up:
"Windows cannot automatically detect this network's proxy settings."
I run google chrome as my internet browser, but as of late Norton has been blocking chrome and my wife started using Internet Explorer...but when we disable Norton, Chrome works fine.
I have Windows 8 installed on 2 Samsung SSDs - one is 840 Pro and the other is 840 Evo. This is because I work on both video and music production and would like to keep things separate.
At first I tried cloning an "old" SSD on to both Pro and Evo to make life easy, but it was a total mess:
I would boot Windows 8 on either Evo or Pro, and before the password prompt, Windows would fire up a Checkdisk on one (or more) of the 5 HD I have (please find the logs and disklayout in the attachments).
This would usually happen if for eg, I'm working on Evo and then I restart to work on Pro - or vice-versa.
But sometimes I would be working on either one of them, and this flag notification would popup asking me to restart because Windows needs to perform a diskcheck.
What is strange to me is that if I do a manual diskcheck (right-click -> Properties -> Tools), it would complete it, the notification disappears but would return a second or two later.
There was a minor issue where for eg, some options in the Control Panel were still pointing to drive H: which before the cloning, was my original C: drive.
Otherwise all software was working perfectly fine.
So I decided to do a clean re-install on both Pro and Evo hoping to solve this diskcheck issue once and for all.
This was 10 days ago, and for the past 10 days I had used almost exclusively the Evo drive. Today I need to work on Pro but Windows wouldn't get past the diskcheck and on to the password prompt.
It's saying "Preparing for Repair", then changes to "Diagnosing your PC" but then this blue screen pops up asking me to choose between Shut Down or Advanced Options.
This happened on rare occasions, but before the fresh install, I would do this perhaps a couple of times in a row (i.e. go to the blue screen Advanced Options and click Exit and Continue to Windows 8) restart, and it would eventually go past the diskcheck and allow me to log in and work. But today it just won't do it.
EDIT: I don't know if it matters but as it is now, it automatically boots up on Pro unless I hit F12 and choose to boot on Evo. But as I said earlier I had only been using Evo for the past 10 days since the re-install.
Attached please find the Srt logfiles which I found by following a path shown to me on that blue screen.
The strange thing is that the path started with drive H: and why drive H: and not C: (i.e. the Pro drive, being the current Windows boot drive). But when I booted on Evo, and went on drive J: (the drive letter that Pro is assigned when I'm on Evo), I found the logfiles there.
Dell XPS 12 running Windows 8 x64. Had it for about six weeks, and I had two problems I with it:
- every so often (maybe once a week), when I would turn it on, instead of booting into my normal startup screen, it would say 'Preparing Windows', then boot into, like, a generic account with none of my programs or files or anything... shutting down and restarting fixes that problem. A little annoying, but no big deal.
- every so often (maybe twice a week), I I'd shut it down, and I'd get the BSOD, with 'SESSION_HAS_VALID_POOL_ON_EXIT' given as the problem. I bit of Googling seemed to reveal that this was a fairly common issue with Wi8 on this particular machine, so I never worried too much about it.
I'm describing these problems because they might shed light on the NEWEST problem, which is as follows:
Did a Windows 8 update yesterday, and today I discovered that when I turn the machine on, I get 'To skip disk checking, press any key within 1 second' at the Dell startup screen... I didn't press anything, but it didn't seem to go into disk-check, booting normally into Windows instead. I tried to do a disk check, and right away, it told me 'Windows has found problems with your disk', telling me I had to restart to fix them... so I did, and got the same 'To skip disk checking...' message, followed by an immediate boot into Windows instead of any disk checking. I tried to do a system restore, thinking one of the updates might be causing the problem, but when I try to do a system restore, it tells me that I have to run check-disk first (but every time I do, I get the same routine I just described above).
The Windows App Store will not open. It spends a while thinking about it, then eventually times out. I would like to update to 8.1, but I think this is evidence of a bigger issue.
I think the real problem in my proxy settings in IE. The LAN settings have the Use Proxy Server permanently checked. No matter what I try, it wont uncheck. I have tried selecting the automatically detect settings box and putting in a dummy config. I ran Malware sweeps, ran virus sweeps, I removed any IE Add-ons. Reset IE. But it still wont let me uncheck that box..
It looks like there is a manual override within the Registry.
I have re installed the Window8 Pro completely, it is still not stop BSOD. It happened frequently everytime when i played Guild Wars 2. I did not overclock at all, even if i want to. I used to overclock before when i used the same specs PC and never had any problem at all, somehow one day i updated my graphic cards ,then it started to BSOD.
MY PC Specs
CPU: i5 2500K
Motherboard:GA-Z68XP-UD3P (rev. 1.3)
RAM: corsair vengeance 1600 8gb
GPU: HIS HD7970 Ghz Edition IceQ X2
THe HDD raid 0 (Primary) and my SSD Raid 0 as well. not sure if it is also caused BSOD.
kmode_exception_not_handled
APC_INDEX_MISMATCH
irql_not_less_or_equal
another one of those annoying little things, how to stop the annoying Checking Compatibility Ad ons pop up every time I open Firefox. I dont want it, dont need it - so where do I 'switch' it off? I have check through settings cant see it anywhere.
View 3 Replies View RelatedMy (12-year-old) son's computer won't boot. It's a Dell Inspiron 17" running Windows 8, bought from Costco in July 2013. When I turn it on, Dell logo comes on and then in upper left it says "Checking Media [fail]", then "checking media" again, then "No Boot Device Found. Press any key to reboot the machine". I insert a USB recovery drive (it was made for my Toshiba that runs Windows 8.1, but it should work anyway, right?).
I choose US keyboard layout and it then opens into Recovery Environment. I choose Troubleshoot → Refresh Your PC. Message appears "The drive where Windows is installed is locked. Unlock the drive and try again." I go to Troubleshoot → Startup Repair, which runs and then says "Startup Repair couldn't repair your PC." I then go back to Troubleshoot → Command Prompt and run chkdsk on Windows drive (c). It says "Windows has checked the file system and found no problems." Dell would probably tell me it's a hard drive failure and tell me to buy another one.
I have a question for all the wise ones here, what is the best email program to use besides the windows mail that is installed in windows 8.1 I really do not like it, also how do I disable that program from checking emails.
View 9 Replies View RelatedI'm fairly new and just wanted to see if there is an easy way to keep all drivers up to date instead of manually checking one by one on the support site. I just wanted to ask what do other people use to check for updates to outdated drivers?
View 5 Replies View RelatedWhen I run Check for Updates it just hangs. It says it is checking for updates and green progress bar is repeatedly running across, but nothing happens.
Before this problem arose I had just run disk clean-up including remove installation files and windows updates. The disk clean-up process removed about 59 GB including a large Windows.old folder.
I upgraded to Windows 8 from XP about 10 days ago. Windows update was working fine until the disk clean-up. I ran Check for Updates frequently after the upgrade to make sure I got all the updates, it worked perfectly well for both update and install.
I have tried Checking for Updates several times since running disk clean-up.
First time I ran it I had this error message: Windows Update error 0x8024a000 (only seen that one time)
I ran the Update Troubleshooter after that and it found/fixed the following:
Potential windows update database error detected 0x80070490 -Fixed
Windows update components must be fixed - fixed
The troubleshooter did not resolve the issue. I have run Check for Updates many times since with no more error messages, but it just hangs. When I run the Update troubleshhooter it fixes the same two issues as above.
Since the disk clean, Windows Update shows:
Most recent check for updates - Never
Updates were installed - Never.
As my Windows Updates were previously all succesfully installed, the history must have been cleared.
No error messages have been seen since that first one which has not repeated.
I am trying to fix my internet problem and have tried everything, going into the CMD and renewing everything. Still not working.
View 5 Replies View RelatedI changed KMS server in my Windows 8.1 PC using this command:
[CODE][slmgr /skms testingkms.com:1688/CODE]
I was doing some experiment. Then I realize it is not MAK. It's just Pro Retail. Now I don't know how to set back to default KMS. And I'm getting this error all the time: check attached screenshot.
Ok so here is some info I have Internet from storm Internet it's a radio dish Ethernet go's to the power over Ethernet device then into my extreme gigabit router , see storm had to come out and move the dish for 20 percent better signal and it was working fine for a day I was getting 6mbps easy, then was on Xbox when out of nowhere it gos out... SO I power cycle.
The poe device and usually it comes back up but it didn't and the computer said the dns server isn't responding..... So I did the ip configuration thing and cleared / renew. Then tried power cycling the router still nothing it should be working...