Maintenance :: Proxy Server Not Responding Message On Entering IE
Sep 11, 2013
I don't know what happened but today when I tried to enter IE I received this message:
The proxy server isn't responding. Check your proxy settings. Go to Tools > Internet Options > Connections. If you are on a LAN, click "LAN settings". Make sure your firewall settings aren't blocking your web access.
If I go to LAN and remove the block with a check beside the proxy sever IE starts, however, if I log off and try to reenter the proxy server box has a check mark.
recently my tiles like the Windows 8 Store, Kindle Reader and Xbox One Smartglass won't connect to the internet. I did some research and found that it was because the "Use a proxy server for LAN" keeps checking itself. Once I un-check this they work, but not long after that box automatically checks itself again.
I have strange issue with Windows 8.1 x64 Pro with Media Center. Since it was upgraded from 8, there have been issues with Software Store. Despite internet connection working fine with Firefox and other applications, Store would not connect to the internet. After long investigation I found out that Proxy server setting in Control Panel -> Internet Options -> Connections -> LAN Settings must be disabled in order to get Store working again. For some reason proxy server only stays disabled for the current session, which means when the windows is rebooted it comes back enabled again. My question is how to make it stay permanently disabled, as I don't use any proxy.
I have win 8 in my lappy... I was able to run internet but now it is showing that "proxy server unable to connect ".. then I checked my ip settings the default gateway was gone.now every time I wanted to save it, it was erased from there...
After I DLed GIMP I noticed that several other apps had installed themselves. Just your run-of-the-mill adware opening random popups asking to scan my system for this and that and trying to sell junk. I used Malwarebytes and AdAware. Don't get me started on AdAware, as I think they've been overrun by monkeys. Anywho, AdAware doesn't find anything anymore, whereas Malwarebytes found 40 something issues. It now says my system is clean.
Now the strange thing is, my problem didn't occur until after I deleted the extra programs from my system. I have yet to locate GIMP at all on my system. Firefox and Chrome were both rendered useless, as they were "unable to connect to the proxy server." The store page in Steam gives me nothing but a "-130 error."
The plot thickens... My computer IS connected to the internet, as I am able to play games online through Steam, and I was able to disable the proxy server setting in Firefox. However, when I attempt to disable my system's proxy server settings, it reverts back the second I hit Okay.
I have changed the registry setting from 03(proxy) to 09(auto-detect)....No dice. That change sticks, but appears to change nothing. I have also disabled other proxy settings in the registry that had been activated, changing 1s to 0s. Those changes stick, too, but still nothing.
The only constant is the phrase "some settings are controlled by your systems administrator" plastered in Internet Options. I am logged in as administrator and have even tried merging Brink's .reg file to remove windows update policies.
Ok so here is some info I have Internet from storm Internet it's a radio dish Ethernet go's to the power over Ethernet device then into my extreme gigabit router , see storm had to come out and move the dish for 20 percent better signal and it was working fine for a day I was getting 6mbps easy, then was on Xbox when out of nowhere it gos out... SO I power cycle.
The poe device and usually it comes back up but it didn't and the computer said the dns server isn't responding..... So I did the ip configuration thing and cleared / renew. Then tried power cycling the router still nothing it should be working...
Today, my internet connection at home encountered a problem. I can connect to the WiFi but no internet access. Usually there's a yellow exclamation mark, but this one is fine, full signal but no internet access. Same thing goes to my iPod, can connect to the WiFi but no internet access.
To my surprise, all my sister's laptop and her Apple devices also the same thing, can connect but no access. I wonder what could be the problem. I use the troubleshoot on my laptop and it says "The DNS server is not responding" and it states that it can't be fix. I already restart my router but still same thing. Right now I'm using my phone's hotspot to connect to the internet and post this here.
I have a Windows 8 x64 rig with a wireless card connecting to Linksys router connected to a cable modem. I also have Hamachi and Teamviewer installed, they add their own setup to the network page, don't know if they are the culprits but with DHCP I have no problem.
Everything works well until I try to set up a static IP on my PC (if I enable DHCP for IPv4 - no prob).
What I did: Set a static IP to avoid conflict with other PCs, subnet mask 255.255.255.0 (auto fills), gateway = my router's IP (192.168.1.1), DNS servers = took from my ISP's site (also tried Google public DNS).
What happens: my PC connects to the wifi as I can browse the router's settings page. But any website I try to access leads to a DNS server not responding. As soon as I reset back to obtain IP automatically everything works.
Previously I made a thread t hat when I sometimes load 2-3 tabs or more, I get page cannot be displayed and I have to refresh each of them until they load, it's like the traffic isn't enough to load several tabs at a time.. Either way troubleshooting gives me this:
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding
In Sharing Center > click the wifi info > Properties > Networking > TCP/IPv4 Properties > All set to automatically detect, even if I inserted the DNS addresses above into manually in IPv4...
In properties I see the same being set, no mismatching DNS servers..
I get this RunDLL (Not Responding) message box every time I restart the computer. The rest of the message says "There was a problem starting C:UsersSHERRYAppDataLocalConduitBackgroundContainerBackground Container.dll The specified module could not be found." I have included a snip .png of the message box.
I will attach this information as a .pdf file, if interested. The files instructed to be deleted in the 'regedit' would not delete at all. And I still don't know if I was intended to delete the the entire folder with sub-folders, but since they couldn't be deleted it doesn't matter. These folders and the files listed in them did not seem to have anything to do with Conduit Ltd. A couple of these 'Regedit' folders were not even listed.
while ago my internet on my laptop got messed, I reset the router and the Internet went down for days, but when it came back it wasn't working for my laptop, but everything else. Trouble shooting has told me it's a DNS server not responding, and now it's telling me the wifi doesn't have a valid ip config. I've tried many things, like with the internet protocals, the command prompt fix which also hasn't worked, and I'm stuck on what to do.
When I click on my my internet protocols v4/v6 it gives me the option to install maybe that's something or not.
I want basicly to home host a VPN, and that is what i do at the moment. So i tried with my friend after i did finish the setup (i did setup the VPN in the Windows Networks interface, over "Incomming Connections"), and i did portforward 1723, and the worst is, that when my friend connects upto the VPN from his PC at his home (not Local), to my IP, then it says on my PC he is connected.
But here comes the problems, at his PC, the Network Icon turns into a yellow warning icon, and when he clicks troubleshoot, it says "DNS Server does not respond", but at my PC here, it even says he is connected to the VPN, but also says no connection over IPv4, and the same on his side.
What can we do to get a connections from my PC to his PC, over the VPN, so he can access the Internet over my Internet instead, like lets say he has a blockade on for example www.facebook.com at home (which he of course doesn't has, it is just an example), and he connects to my VPN, as he accesses my Internet instead, he can open www.facebook.com, instead of having it blocked (one of the main purposes for a VPN, and the data encryption of course).
Here some screenshots:
My PC (Language = German): My Friends PC (Language = Norwegian):
And as you can see on my PC, it says he is connected, and as you can see on his PC, it also says he is connected, but he cant access the Internet, or anything else related to the web. Now prepare for the funny part: We were on Skype, and as he connected to the VPN, and "lost" the Internett Access, we were still talking (i guess that's because Skype still runs over the home network, while the rest tries to access internet over the VPN connection .
I've got Toshiba L50-A-19N half of a year old and it started to load everything really slowly or is not responding for a short period of time (acts like frozen for 2-3 second, something like spike). I've done Chkdsk, Memory Diagnose tool, defragmentation. Scanned PC with McAfee, Windows Defender and Malwarebytes. Also reinstalled Windows but nothing worked. Disk seems to be in good health according to Toshiba Health Center and the CPU is not hot, neither used (7% usage and i still get spikes)...
Twice in last 2 weeks, some of my tiles (Games, Bing News, Store, People, Mail, etc.) have just stopped responding.When clicked, I get a blank screen, then the full Start Screen re-appears.Other tiles such as Chrome, Word and Outlook work OK.When this first happened, I did a system restore, and the problem went away, but this time the restore point seems to have gone too.The 'Change PC Settings' does not work either, as I decided to try a complete refresh, but can't access that.
Recently I've started having this problem where if I right-click anywhere in File Explorer, no matter what folder, my cursor switches to loading, then the folder goes to (Not Responding), and I have to close it out which causes Windows Explorer to disappear for a few seconds.
I saw the other thread here about "Windows 8 Pro Randomly Freezing," but I think I'm seeing something slightly different. In my case, I'm getting random, repeated instances of various desktop applications temporarily "locking up" and displaying a "Not Responding" message in the title bar of the effected app.
I see this most commonly in Firefox (32-bit version, v17.0 release). These lock-ups last roughly a minute. It seems to minimize the Firefox window (yes, even when not responding, window controls are operative) and then restore it. It will still display the "Not Responding" message, but this seems to clear within 10 or 15 seconds. Not sure this is a fix, and it could be coincidental.
While I initially thought my problem was Firefox, I'm seeing it in other apps, including Evernote and Windows Explorer. I think on a couple of occasions I actually saw this "Not Responding" message appear in dialog boxes.
Any way to force a process to become "Not Responding" for troubleshooting purposes, but I have not been able to find one. I have also been unable to find anyone on the internet who is trying to do the same thing as I am. Basically, does any way I can intentionally stop a process from responding?
Why do so many programs just stop working, stop responding for no apparent reason??? This includes IE9, e-mail service, new printer/scanner installation, etc, etc, etc. Sometimes even writing a letter or "Save as" just stops responding. How can this be??? Windows says "we're looking for a solution", but nothing ever shows up. Is there no diagnostic that can identify the failure? Is it memory, conflict, what can be causing these annoying interruptions??? Mostly rebooting the system will clear things up.
My setup: Windows 8 PRO, CPU Intel i7 3.40 GHz 64 bit, 16 GB RAM, INTEL SSDSC solid state hard drive 223 GB (about one quarter full). I did not have these problems with Windows 7, or the Windows 8 pre releases.
Temporary freezes and occasional "not responding" messages are not often seen in Windows 8, but occur much more frequently than they do in W7. Same hardware, same software. Only the drives and a few drivers differ.
These hesitations arise in various programs or while manipulating UI options, and have since the earliest Windows 8 betas, though they have become less frequent with each release. No forum messages that I have come across relate specifically to this random issue.
Additionally, Windows 8 is a multitasking slug as contrasted to W7 when, for example, a large file is downloading in the background. Open another program in W7 and it pops up almost immediately; open in Windows 8 and it takes 15-30'. Priority has been assigned to both "programs" and "background services." Made no difference.
2600 Intel CPU, ASUS P8P67le MB, NVidia 210 GPU, at least 28G free space on each drive.
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)
I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (Windows 8 Enterprise) both enabled "Shareable and Visible".
View from W2003 -- can see and access disks C,D, and F on Windows 8 Computer
View from Windows 8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but Windows 8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't work at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of support ever.
I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.
Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.
I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.
(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !!)
Note -- Other W7 / Linux / XP computers connected to this SAME LAN (currently switched off) have NO problem accessing the server -- It's just this Windows 8 Machine (Windows 8 x-64 Enterprise version).
in Windows-8 when i try to delete folder i got the message:
"The action cant be completed because the folder or file in it is open in another program"
i check and close all program, i dont see it in the task-manager(if i reset the computer, and try again it will delete it) Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
Am using recimg to create custom image on freshly upgraded win 8.1 install. It fails almost immediately with this message appearing in a pop up:
"The procedure entry point ??0BufferedStream@UnBCL@@QEAA@PEAVStream@1@K@Z could not be located in the dynamic link library c:windowssystem32migwizmigcore.dll"
Further info:
Problem signature: Problem Event Name: APPCRASH Application Name: recimg.exe Application Version: 6.3.9600.16412 Application Timestamp: 5243fc60 Fault Module Name: KERNELBASE.dll
[Code] ........
System info : OS Name Microsoft Windows 8.1 Version 6.3.9600 Build 9600 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name TOSHIBA
recently I tried doing a system restore on windows 8 and after going through the process of waiting, I received a message upon reboot namely this "System Restore did not complete successfully, Your computer's files and settings were not changed.
System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporally disable your antivirus program and retry System Restore.
An unspecified error occurred during System Restore, (0x80070005)"
anyway I panicked and went to undo the last change made(if one was in fact made) via system restore , but the same thing happened I repeated this procedure a few times trying to restore to the same point and then undoing the operation (I have Obsessive Compulsive Disorder) to which it just kept giving the same error message after going through a short process and rebooting each time.
I was wondering could any of this possibly of corrupted my files, deleted files, or wrecked anything in any way, my computer my programs, anything. As far as I can remember the restore process said something about restoring registry each time, which only took a short time.
I have my laptop set up so I don't have to enter a password each time I start it. But I recently changed my password in my Microsoft account by going into Microsoft.com. Now when I start my laptop, it stops half way giving a message that it has an invalid password. At this point, I just enter my new password and it finishes booting up with no problem.
So my question is how do I synchronize the password that my laptop is using to the new changed password in my Microsoft account?
Just as a note, I forgot the password that I had originally set up on my laptop.
Unfortunately I forgot all my BSOD analysis skills, so I'll give you the chance. I just bought an ASUS Zenbook for studies, which is very pleasant. Though, today when I visited a website called The Verge, I got a BSOD. Earlier today when I visited the site, it froze for a second or two.
Usually it happens when the computer is running on the battery. I experienced a sudden shutdown when it's on battery, which is notable imo.
I've recently got a new laptop with windows 8. I am in the process of trying to upload my cd collection to my computer. Some of my cds are old mix disks that when ripped by windows media player do not have all of the information properly loaded such as artist/album/etc... So I started manually entering the data and renaming the files, this is where the problem comes.
Sporadically the laptop will erase/forget the information I've entered into the song files and will reorganize them into a different folder. It likes to send them to an "unknown artist" folder.I am entering the data by right clicking the file, selecting properties, and in the details tab is where I type everything in.
