I can not get rid of old windows 7 option when I start up my laptop - it gives win 7 and win 8 as options like there are 2 os which there is not. If I try to click on win 7 option nothing happens. I have reinstalled many times and can not get rid of it. I have an ASUSF5RL
I don't know if it is connected but when I try to shut down it takes 5-30 mins for the computer to click off. How do I get rid of this?
I have HP 1000 Notebook PC.(Core i3).i have installed windows 8.problem is that my wifi option in the windows shows OFF.when i move cursor to it it is not highlighted.in fact it seems its not even installed. (cannot be turned on.).
View 1 Replies View RelatedMy bios shows uefi boot option but no uefi shell... I enabled uefi boot option and booted my dvd it asked me to partition my hd using a GPT format... I even did so so... but when I run
Code:
bcdedit /enum
In elevated command prompt it shows me this
Code:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=DeviceHarddiskVolume1
description Windows Boot Manager
[Code] .....
The bold line means my system does not boot from efi... isn't it?
I previously used ubuntu in my Windows 8 Pro and Windows got many errors so i deleted the folder of ubuntu..did not uninstalled and all that. now it shows ubuntu on OS choose Screen. then i thought installing Ubuntu would overwrite the existing one..but sadly i have two Ubuntu Choice..one is empty and another is working.
Now, how can i edit that screens setting. by setting i dont mean going to advance setting and choosing default os. I want to edit like in Windows 7, boot.ini file.or If there's any other way to remove that empty Ubuntu from the OS choice Option
I have had to system restore 3 or 4 times in the last week or so as Windows 8 refuses to boot after installing the latest updates discovered from the last couple of weeks (though some are from December 2012)
I have unchecked all the current updates and have decided against installing them as they seem to be preventing Windows from booting.
Pattern - "Restart to install updates"
Restart locks on the start screen - Restart again and locks again (repeat this process 3x)
"Windows is automatically repairing..." - Fails
"Windows must restore settings to a previous time..." - Usually succeeds, sometimes fails.
Then I can get back into Windows.
As soon as I install these updates, I won't get back into Windows until I system restore since before the updates and my build won't remain stable unless I prevent Windows from installing these updates.What could be going on?
They are quite big updates (totalling ~740mb and have all been discovered in the last week or so though some date back to late last year)
I have a Windows 8.1 and a problem with my apps. When I try to open weather, finance and other apps, They show their start-up screen and in a couple of seconds they're gone - I am brought to my metro screen... Tried to reinstall the apps, but hadn't got any luck...
But wait, it get interesting: Even though the weather app crashes, I have a live tile option on for that app, and it shows me weather nicely.
Here are some of the errors from Event viewer:
Failure to load the application settings for package Microsoft.BingMaps_8wekyb3d8bbwe. Error Code: 32
Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 32
Failure to load the application settings for package Microsoft.BingWeather_8wekyb3d8bbwe. Error Code: 32
Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 32
After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
So some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
I recently built my own computer, and have been using it problem free for a while up to now. I realised the lack of computer restarts for updates, and I noticed that I have updates that need to be download. When I tried to download the updates, The progress seemed to stop. Thinking this was normal, I left the download to be. When I came back to it, It said that windows could not install the updates. want to try windows 8.1
View 9 Replies View Relatedwhat do I do if the refresh install on Windows 8.1 says that I'm missing files?
I installed Windows 8 from a retail disc and upgraded to 8.1 via Windows Update. I can't use the Windows 8 disc, it says invalid media.
I've seen all the tips on setting up a dual boot while installing Win 8 with an existing win 7 installation but I can't find any way to add a boot option AFTER installing win 8.I have an image of win 7 that I want to put on another hard drive and then be able to dual boot either 8 or 7.
I tried using easybcd and it appeared to save the entry but it wasn't there when I booted up.
On a side note I also can't seem to change the timeout value before it boots. It always reverts to 30 seconds. I tried msconfig with the same results.
I do have an added boot menu for a recovery via Farstone recovery. It added it to the win 8 boot menu so it must be possible to add the win 7 somehow.
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
I want to get started with WP8/8.1 dev and I decided to dual boot on my work laptop (Mac Book).
The problem is I don't want to use my Dreamspark (OEM as far as I know) license on my work PC since it's an academic license if I'm not mistaking and this might cause some problems at work, and I also don't want to activate it on my 6 years old PC since I have some projects still going on and I'm planning on upgrading sometime next year.
So my question(s) is simple: Can I install the 90 days trial of Windows 8.1 Enterprise and reinstall again, on same PC after the trial is over?
I need to install the .Net framework 3.5 sp1 on Windows 8.1 for Autodesk 3ds Max for work. I initially noticed this in the Max installer...just quit installing and says I need to connect to the internet. Of course I am connected just fine.
Tried Windows update, gave me this error: 0x800F0906
Tried enabling .net 3.5 from the features menu, but got the same Windows Update "connect to the internet" error.
I tried using command prompt to do this command: Dism /online /enable-feature /featurename:NetFx3 /All /Source:E:sourcessxs /LimitAccess
That did not work, even with the installation media inserted, CMD gave me error 0x800f081f saying it could not locate the files on the Windows 8 installation disc (YES I DID INSERT THE CORRECT DRIVE LETTER)
I even copied the sxs folder directly to my C directory, directed the command to the folder itself and it still gave me the same error. The only thing I can think of to actually make that command work is if I had a Windows 8.1 disc instead of 8.
I've tried downloading multiple "offline" installers for it, but they all do the Windows Update crap that got me into this in the first place.
Ive installed Update 1 on two of my three desktop PCs but on my main PC, it's not showing up in the MS Update window. I tried installing it manually via: Download Windows 8.1 Update for x64-based Systems (KB2919355) from Official Microsoft Download Center But it says this cant be installed on that PC.
View 4 Replies View RelatedI'm running Windows 8 at the moment and I am trying to get 8.1 installed.
I go into the Windows Store......and I get no option at all to download and install 8.1. Windows updates are on, not sure if that even matters though. Windows Store is just not giving me any option to install it, or even tell me that its available to download.
Now, I'm in the UK, but as I understood it, Microsoft's release of 8.1 was global. I have also done several reboots of the PC, no change.
I was running windows 8.1 back in January and it crashed during an update. After that, the system wouldn't start and just kept on going round in circles trying to fix itself. (See thread 'Solved: Can't fix windows 8.1, PC locked. Last post 28-2-2014.)
Under diagnostic tests at a local PC repair shop, a hard drive failure seemed to be the problem. Since it was under warranty, it went back to PC World who sent it back to Lenovo. I got it back in March but all they did was a system reset, putting it back on windows 8.
Everything is now working fine apart from one fact. It won't update. I just get the 'failure configuring updates, reverting changes' message. My metro tiles stopped working yesterday as well. I presume this is also an update issue. Under investigation it appears updates have never been installed. I came across a message saying the place where windows stores updates has been moved. How do I repair this, since the windows update troubleshooter doesn't work? I am fairly conversant in DOS, but it's been a while.
I'm using a Lenovo Ideacentre B340 running windows 8 with the following spec:
Intel Pentium CPU G645 @ 2.90GHz
DDR3 SDRAM
Lenovo Mahobay motherboard
440GB Hard Drive
I have enabled safemode startup on the F8 key and everything of importance is backed up.
By default the time for my laptop to restart after installing updates is 2 days! Can I reduce this time so that my laptop will restart when the update is done whilst I am out?
View 2 Replies View RelatedWhen I search for updates with windows update it finds the drivers I want but it gives me an error message whenever I try to install them.
I already tried downloading the latest windows update (when I install it, it says the update was succesful and asks me to restart, but when I search again after restarting the update shows up again and lets me install it again).
I also tried deleting and renaming my software distribution folder and using the windows troubleshooting program.
Overall I'm not really too fussed about most of the things it's trying to install apart from the drivers for the wireless reciever for my xbox controller as it won't work without them. When I try to install the driver files through device manager it gives me this error message
my main reason for mentioning the windows update problem is that I assume the problems are linked as the wireless reciever works perfectly on my laptop. Up to about a week ago it also worked perfectly on this computer using the same usb port that it uses now.
As you can see, on the 19th, it suddenly began to say "NULL DRIVER". I checked my system restore and it tells me that I installed a windows update on that day just before it suddenly stopped working. I tried reverting back to this restore point (before the update) and nothing had changed, the device still would not work.
I have two PCs..a Dell desktop and a Sony laptop(Purchased last June) yesterday I received the windows 8.1 updates so I installed them on my Dell desktop, no problems, it installed it and shut down the PC just fine and I am on it right now..but with the Sony laptop its nothing but problems..I installed the updates, it reboots just fine, but when I try shutting down the laptop it just goes back to a loop like it keeps on booting up then crashes then I have to restore it to August 9th and then it shuts down fine..so I am not sure what is going on..is there a particular update that is causing this I wont install it I just cant figure it out and I have done the system restore 3 times already..it will say I have 32 updates to install(including 1 optional one) so I just installed 30 of them to see if it would work and then I shut down the computer and same issue so something Im installing is causing this problem
View 1 Replies View RelatedI have a Windows 8 Pro Upgrade, and I know I can activate it after doing a clean install using regedit, but will this "trick" work if I use an ISO with included updates?
View 8 Replies View RelatedCan Windows 8 be made to give the option to install Home or Pro from one iso like Windows 7 could? There is no ei.cfg file to remove like in 7. I tried this method from the How-to Geek but it did not work. Error 87 like a lot of others experienced.
View 5 Replies View RelatedSo I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it.
I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.
I have done several Win 8, Win 8.1 Preview, and Win 8 RTM clean installs recently and I always seem to end up with a Pacific Time Zone by default. Now, that tells me I am either missing that option on a consistent basis or MS didn't include it.
View 4 Replies View RelatedI can't even install KB2965065, I installed others given by Update Center, but can't install this 400 kb update, it fails everytime & boots computer 2-3 times.
I can give any type of Logs here.
The Troubleshoot icon that should be under the 'Advanced Startup' Option is missing. System is a new Dell Latitude 10 ST2 Tablet running Windows 8. Have access to 9 other identical tablets, all configured the same and they all have the Troubleshoot Option. Have tried multiple methods of getting to "Advanced Startup" display (including Safe mode, 'shutdown /r /o', etc.), but all result in only having the 'Continue', 'Use a Device', and 'Turn Off your PC' options - No Troubleshoot. Other than missing this icon, system is working fine. Shy of wiping the disk and starting over.
View 4 Replies View RelatedWhen I'm installing Win 8.1 Pro, it starts automatically "Checking for Updates" near the end of install process. That is before getting to Windows Start screen/Desktop.
I'm using a autounattend.xml file, but didn't find a way to skip "Checking for Updates" yet. It is the only answer I could not automate. Trying to do that without user intervention. Just by means of autounattend.xml file.
I am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.
Is there a site where updates can be downloaded according to their KB numbers then installed manually?
I can't install .NET Framework 3.5 no matter what I do. I tried downloading it and in the midway get the error 0x800f0906. I tried installing through DISM but that didn't work either. It always stops at 65.8 %.
View 9 Replies View RelatedI have been unable to instal updates for a while but unfortunately I put off looking into it and it has been far too long that I dont have a restore point to try.
The computer works completely fine otherwise so I would prefer to find a solution that doesn't involve reinstalling windows.
I think the problem is that the component store has been corrupted, I have tried Dism /Online /Cleanup-Image /RestoreHealth from Admin command prompt but it says Error 14098 The component store has been corrupted.
I will attach the dism.log
My spec if needed; AMD FX-8320, Radeon R9 270X 2GB , 16GB DDR3, ASRock 970 Extreme3, Windows 8.1
Win 8x64 desktop, two printers (Brother, Canon) connected with USB cables, no network, not part of home group. Both print ok.
I just did an in-place Win 8 repair, followed by adding the updates. Since the first set of updates, there have been eight PrintService errors (215) in Admin Events at startup.
Here are some examples and screenshots:
- Installing printer driver Microsoft enhanced Point and Print compatibility driver failed, error code 0x0, HRESULT 0x80070661.
- Installing printer driver Microsoft enhanced Point and Print compatibility driver failed, error code 0x661, HRESULT 0x80070661.
- Installing printer driver - failed, error code 0xBC8, HRESULT 0x80070BC8.