Can Windows 8 be made to give the option to install Home or Pro from one iso like Windows 7 could? There is no ei.cfg file to remove like in 7. I tried this method from the How-to Geek but it did not work. Error 87 like a lot of others experienced.
View 5 RepliesI've seen all the tips on setting up a dual boot while installing Win 8 with an existing win 7 installation but I can't find any way to add a boot option AFTER installing win 8.I have an image of win 7 that I want to put on another hard drive and then be able to dual boot either 8 or 7.
I tried using easybcd and it appeared to save the entry but it wasn't there when I booted up.
On a side note I also can't seem to change the timeout value before it boots. It always reverts to 30 seconds. I tried msconfig with the same results.
I do have an added boot menu for a recovery via Farstone recovery. It added it to the win 8 boot menu so it must be possible to add the win 7 somehow.
I have done several Win 8, Win 8.1 Preview, and Win 8 RTM clean installs recently and I always seem to end up with a Pacific Time Zone by default. Now, that tells me I am either missing that option on a consistent basis or MS didn't include it.
View 4 Replies View RelatedI thought I would look at creating/using my own media.
I have been using VMs for testing these, so much better than playing with someone's PC
I have ISOs for both 8.0 and 8.1 which I downloaded using Windows 8 and Windows 8.1 ISO - Download or Create. The licence key I used for the download was my legitimate one that I purchased from Microsoft (so it wasn't OEM), it is actually an upgrade key from Windows 7 for Win 8 Pro. I can install these ISOs no problem but they always install the Pro version and I never get an option for installing Home.
I tried putting a ei.cfg file in the sources directory containing
[EditionID]
[Channel]
Retail
[VL]
0
But this just allows me to install without the key. I tried putting both "Core" and "Home" in as an EditionID but the install process fails saying "The product key entered does no match any of the Windows images available for installation. Enter a different product key"
If I try using the downloaded iso without the ei.cfg file but instead use the generic key for Home I get the same message.
So I'm pretty sure the downloads I got from MS just contain Pro. Is this right or is there a special way of making Home available? Based upon what I have seen in the forums I would also probably need "Home Single Language" to be available as well (if possible).
In case it makes any difference the ISOs I have always set their language to English (United Kingdom) during the install.
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
I have an Acer aspire S3 Ultrabook Laptop (one of several laptops) and I am wanting to upgrade the os to win 8 pro. I have the win 8 pro pack,which is a full version i think,it does not say it is an "upgrade". Am i still able to use this win 8 pro pack to upgrade?( i thought upgrade packs are in fact cheaper)
There is the windows upgrade anytime link which i used just now,but it said that the windows key is invalid.It is a brand new pack with a new key.
I have read instructions online that say i need to insert the disk.But i am wondering if all the acer software will be deleted on C drive,although the instructions say it will be kept intact,as it has the acer recovery software in control panel on it. If the acer software is deleted how will i reinstall those? I am guessing that the win 8 pro disk will have all the right drivers?
New Laptop - I successfully resized, partition 600gb to 500gb --- 100gb unallocated space as i thought Iwill dual boot (8 MONTHS Ago).
Decided dont want to - Want to know EXTEND unallocated space - But CANT
I easily shrinked it but cant extend it. When right clicking the "extend" is faded out and i cant click it.
No luck with Esus partion manager ...
I have installed windows 8 on a windows 7 PC on a separate hard disk. But I am unable to get boot option at startup. Every time I have to select windows 8 boot disk from bios boot menu.
View 3 Replies View RelatedI have a 32-bit version of XP on my system, so when I do an upgrade within the XP OS. It automatically upgrades me to the 32-bit Windows 8. The actual installation went fine, without a hitch actually.
I have a 64-bit version of Vista that I may go ahead and do a clean install of first, just so I can upgrade to the 64-bit of Windows 8. But when I was going through the upgrade program, I never saw the option to create the ISO DVD or Flash drive. The only options were, "Install now, or install from desktop later". I chose "install from Desktop later" and found that all it did was suspend the installation until I clicked the desktop icon, which then just loaded the upgrade without giving me the option to create the DVD or Flash disk. Is there somewhere I can download the ISO so that I can create a disk?
I previously used ubuntu in my Windows 8 Pro and Windows got many errors so i deleted the folder of ubuntu..did not uninstalled and all that. now it shows ubuntu on OS choose Screen. then i thought installing Ubuntu would overwrite the existing one..but sadly i have two Ubuntu Choice..one is empty and another is working.
Now, how can i edit that screens setting. by setting i dont mean going to advance setting and choosing default os. I want to edit like in Windows 7, boot.ini file.or If there's any other way to remove that empty Ubuntu from the OS choice Option
I had ubuntu within my windows 7 earlier. Later when i installed windows 8, i formatted the partition ( E: ) in which ubuntu was installed, since the wubi uninstaller was not working. Still when i start my system, it shows ubuntu listed in the boot list. I tried to load it once. It gave an error. There is no error when i select the default windows 8.
Now i checked the boot option in the msconfig as per the thread, but only windows 8 is listed there, no ubuntu. But still it is listed in the boot menu. I tried the disk manager, the only partition without NTFS file system is the one with status "healthy (OEM partition)". I dont know whether its a ubuntu partition. And there is no option to delete it also. No other ubuntu partition. I want to remove the ubuntu boot option from my os list. How to do it?
I wanted to remove the hidden recovery parition on my Asus Zenbook UX31A, which is 20GB in size, and I need that space, because the laptop just has a 128GB SSD, and I am permanently on space limit of about 1-2GB and Windows isn't working anymore properly.
when I open the Windows 8 recovery tool, the option for copying the recovery partition is greyed out. I googled for this, and I just could find informations about, that this can happen, but not why, and how to solve it.
How to Backup Windows 8.1 ? I can not find the option to repair disc and system image .
View 9 Replies View RelatedSo I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?
View 2 Replies View RelatedI just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
I wish to upgrade my pc from Windows 7 Home Premium 64 to Windows 8 Professional 64.
I have purchased and received the Windows 8 Professional (Upgrade Edition) 32/64 DVDs.
Do I need to disable Norton Internet Security (NIS) 2013, before I proceed with the upgrade (Keeping all apps, settings, and files) ?
Would I need to reinstall NIS 2013 after upgrade is completed ?
How long (on average) am I looking for the upgrade to fully complete from start to finish ?
And finally, does everything transfer successfully (as I'll be using the 'Keep all apps, settings, and files' option) ?
I just got an XPS 8500 with 64-bit Win 8 (non-Pro). I'd like to load a lot of XP apps from my ancient machine. Is there a way to load/run them? I've heard of HYPER-V, but it only runs on Win 8 Pro. There may be other solutions, but I don't know which to choose. I'd like to feel comfortable that whatever it is will work. If the answer is No, should I go to 32-bit Win 7 or 8 (and would THEY work?) or some other answer?
View 1 Replies View RelatedI tried to reinstall Office 2010 Home & Student to Windows 8.
It downloaded OK, but did not complete the installation.
No error code just said "Can't complete installation.
I'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedI've recently purchased a new laptop with a genuine windows 8, and then I upgraded to 8.1.
Is it possible to install with the same DVD using the same product key?
I have a Kingston SSDNow V200 128 GB SATA III 6 GB/s 2.5-Inch SSD I was using on my old Dell Precision 370. I now have a new Lenovo IdeaCenter K450 running Windows 8 X64 and I want to install the SSD in it.
This is what the drives look like now:
I want to clone the 1st 4 partitions plus the C: partition. I can reduce the size of my existing C: so everything will fit on the 128GB SSD. Anything I need to watch out for? I would think that cloning the existing setup should work. I will connect the SSD to the lowest SATA port, where the 2TB drive is now and move the other two drives up by one SATA port.
I am using bootcamp to run windows 7 on my mac. I recently used the windows 8 upgrade assistant to purchase windows 8. I received a product key and an .iso file but I decided to wait until a upgraded. Today my windows 7 crashed and I am unable to boot windows 7 anymore and i have a 'Missing Operating System' error. I have tried to recover windows 7 without success. So my question is: Can I install windows 8 on my mac through bootcamp by using a purchased upgrade key and if so how would i do it? I only have the windows 8 pro upgrade key which I had a backup of before the crash and i do not have the .iso file. Also would I still be able to use the upgrade key even though I am unable to access windows 7?
View 1 Replies View RelatedI'm running Windows 8.1 on an UEFI system, clean installed from my USB-key created with Rufus. But when I try to boot with this USB-key on my older PC (which does not have UEFI), then before installing Windows it says that there is no HDD or partition Windows can be installed in? I can then boot again with USB-key select rep. PC, start cmd, change the HDD to GPT, then Windows can be installed, but then it can't boot from the HDD!!
How do I make a bootable USBkey with Windows 7 or Windows 8 that can be installed on an ordinary MBR HDD? I need to make it on my system running GPT SSD.
I have tried this:
CMD (elevated)
diskpart
list disk
select disk (selected my USB)
clean
create partition primary
active
assign
exit
and then copied my windows 8 dvd onto it.
It will boot, but Windows will only install on a GPT HDD.
What to do?
I was able to start the install of 8.1 Preview directly from the downloaded .iso file. Just double clicked on it to open in Windows Explorer then double clicked on setup.exe and off it went. This only works from a booted Windows 8 system (not sure about Windows 7).
[URL] .....
Didn't need to create a bootable flash drive or DVD.
I have recently purchased Windows 8 Pro Upgrade and for Christmas I will be getting my first SSD.
I want to do a clean install of 8.1 via USB, is this possible with the Windows 8 Pro Upgrade key? I have read through numerous tutorials and think I've got it right but just want some to clarify this will work.
Download the 8.1 ISO
Use the generic key to run the installer
Setup the PC
Open PC Settings
Change Product Key enter Win 8 Pro (upgrade) key and activate
Do I then need to do the reg edit and command prompt changes? Regedit - HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE Command prompt - slmgr /rearm Do I have this right or am I missing something?
Tried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
View 2 Replies View RelatedOEM keys pre-installed in the my laptop as i too want to clean install windows 8.1 also my os was windows 8 Single Language and i have a 8.1 Pro ISO
View 2 Replies View Related