I have a Windows 8 Pro Upgrade, and I know I can activate it after doing a clean install using regedit, but will this "trick" work if I use an ISO with included updates?
View 8 RepliesAfter a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
sometimes when testing new systems I have to install Office 2010 from scratch (I have a VL enterprise version so activation isn't an issue).
However Windows update then every time prompts for about 1.5GB of updates and fixed.
How to "slipstream" these into my office install disk - or at least store these updates manually so I don't have to keep downloading the same stuff over and over again.
When I run Check for Updates it just hangs. It says it is checking for updates and green progress bar is repeatedly running across, but nothing happens.
Before this problem arose I had just run disk clean-up including remove installation files and windows updates. The disk clean-up process removed about 59 GB including a large Windows.old folder.
I upgraded to Windows 8 from XP about 10 days ago. Windows update was working fine until the disk clean-up. I ran Check for Updates frequently after the upgrade to make sure I got all the updates, it worked perfectly well for both update and install.
I have tried Checking for Updates several times since running disk clean-up.
First time I ran it I had this error message: Windows Update error 0x8024a000 (only seen that one time)
I ran the Update Troubleshooter after that and it found/fixed the following:
Potential windows update database error detected 0x80070490 -Fixed
Windows update components must be fixed - fixed
The troubleshooter did not resolve the issue. I have run Check for Updates many times since with no more error messages, but it just hangs. When I run the Update troubleshhooter it fixes the same two issues as above.
Since the disk clean, Windows Update shows:
Most recent check for updates - Never
Updates were installed - Never.
As my Windows Updates were previously all succesfully installed, the history must have been cleared.
No error messages have been seen since that first one which has not repeated.
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
So some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
How do I clean mounted image after integrating updates and drivers? When I give the final command of commit, the resulting image is 4.8 GB.
I found this command
dism.exe /online /cleanup-image /startcomponentcleanup
This command also removes un-needed installed updates. But it is for cleaning the installed OS on C: and not for Mounted image using DISM.
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
I have an upgrade key to Windows 8 that I bought to upgrade from 7. Now that Windows 8.1 is out, I would like to upgrade to Windows 8.1, but I want to do a CLEAN, REFORMATTED install.
How can I do this when I only possess the upgrade key to Windows 8.1.
I am sure many other people are interested in doing this as well.
I recently built my own computer, and have been using it problem free for a while up to now. I realised the lack of computer restarts for updates, and I noticed that I have updates that need to be download. When I tried to download the updates, The progress seemed to stop. Thinking this was normal, I left the download to be. When I came back to it, It said that windows could not install the updates. want to try windows 8.1
View 9 Replies View RelatedOEM keys pre-installed in the my laptop as i too want to clean install windows 8.1 also my os was windows 8 Single Language and i have a 8.1 Pro ISO
View 2 Replies View RelatedI tried to install Windows 8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black.
View 3 Replies View RelatedHow windows 8 works now without the sticker key on new laptops. I've searched all over the internet and all I can find are dumb articles telling users to use the manufacturers recovery image. How to do a CLEAN install of Windows 8.
My new windows 8 has NO sticker key on the bottom so my understanding is that it's stored on the bios? Is this correct? So my question is, is if I get an ISO of windows 8 and install it, will it automatically recognize the key or is the key only set up to be recognized by the PC manufacturers crapware filled image?
ALSO, if thats the case, can I use a 3rd party product to pull my key and then use that with the clean ISO? Lastly, where can I download a clean ISO of windows 8? I know you can download official windows 7 ISO's, but i cannot seem to find an official windows 8 iso. I have no desire to download a torrent or from some shady website, I just want an official ISO.
It says I cannot install windows 8.1 because ubuntu doesn't use ntfs partition but ext4. How can I do a clean install of windows 8.1?
View 9 Replies View RelatedThis video tutorial demonstrates how to clean install the Windows 8 Consumer Preview, which was released to the public on February 29, 2012 and expires on January 15, 2013. The Windows 8 Consumer Preview is an open beta test presentation of Microsoft Windows 8, the successor to Windows 7 and next-generation client operating system from Microsoft Corporation.
In this demonstration, you will be shown how to free, legitimate copy of the Microsoft Windows 8 Consumer Preview, with product key, and install the operating system in a clean environment. In this video, the installation of the 64-bit version is demonstrated.
so my windows install got borked so i formatted drive and did a clean win 8 install (not win 8.1). everything seems to be happy except the entire c: is "protected." can't even make a new folder without a pop up saying I need administrator approval (I am the only user and i am the admin).
View 2 Replies View RelatedI can't do clean install for win 8.1 update 1 retail pro version,due to product key problem.i tried many keys still the same problem,key isn't valid,the key that i bought is working only when upgrading from windows 7 only?
View 3 Replies View Relatedwindows 8.1 pro cant seem to add media center although windows 8.1 is activated is says "you cant add features to this edition of windows"
View 1 Replies View RelatedI only have a Windows 8 Single Language key purchased. They mostly sell that version in my country. But I need to perform a clean install of Windows 8.1. How can I do this? How to get the ISO? I can't install 8.1 PRO ISO with a generic key and they use the SL key to activate right?
View 5 Replies View RelatedWindows 8 has a RAMDisk driver included but I don't know how to enable it, the path is:
C:windowssystem32DriverStoreFileRepository
Ram disk.inf_amd64_d76914a4306b4196
18.02.2012 00:38 4.010 ramdisk.inf
18.02.2012 05:36 28.160 ramdisk.sys
If you add this driver a new device tree called RAMDisk shows up, but under drives I can't see a new volume. How to enable this RAMDrive? I have 16GB RAM, so I'd really like to do that.
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
I bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct.
Do I:
1.) Get the ISO on the USB following the steps mentioned in the link above.
2.) Take out old HDD and install new SSD
3.) Reboot computer with USB
4.) ?
5.) ?
6.) ?
etc.
Are these steps incorrect?
Windows 8 64bit was taking forever to boot so I did a clean install but that didn't work. I am using an ASUS K56CA laptop. I have tried updating all the drivers I could find and windows too but it didn't work. When trying to put the computer to sleep I did get a DRIVER POWER STATE FAILURE message but I don't know if that's related to the extremely long boot times. I also disabled everything non essential from starting using MSCONFIG. I am out of options.
View 9 Replies View RelatedI have problem Windows 8.1 stuck on loading screen (clean install). Windows 8 works perfectly.
1. Clean install.
2. First restart and then stuck on loading screen.
3. No updates, drivers or programs not installed.
Any way to do a clean install of Windows 8.1 on a Windows 8 tablet.
Tablet Model is ASUS VivoTab Smart ME400C-C2.
It came originally with Windows 8 32bit. I was wanting to know if there is a possibility of doing this with a Windows 8.1 Disc.
Now I know there is a way to hook up a portable optical drive with a cable called a USB OTG.
I was told by ASUS though i would not be able to boot from the optical drive like a PC or Laptop could and to be able to boot from this OS disc so i can do the install this way.
So is there is a way maybe by making a disc. image and putting it on it's MicroSD or running it directly from the disc, i am not sure how this would work wanting to do a custom install.
Question is there any differences with the Windows 8 OS on the tablet now, compared to the OS on the disc usually used for a PC or Laptop ?
I just did a clean install of Windows 8.
I notice that in Task Manager>Startup tab there is an item for Logitech Download Assistant.
Why is it there?
I have yet to install any of my Logitech software.
I have performed a clean install of windows 8.1 pro on my desktop with MSDN dreamspark serial and an ISO downloaded from Microsoft site with the serial ... the installation goes OK until I do the first restart, it hangs and the screen freezes at the spinning dots restarting, I left it abot one hour, it never restarts, by pressing the reset button the windows boots then the logo disappear then black screen with no responding, Is that copy is bugged or the windows is not activated.
View 7 Replies View RelatedIs it possible to get hold of an ISO or something similar to get a fresh/clean install of Windows 8.1 update 1 on my Surface RT? Via USB i.e.
View 9 Replies View RelatedI have one of the above tablets that came with windows 8.
Id like to do a clean install of windows 8.1 but the widows 8 key that came with it doesn't seem to work with 8.1.
Ive installed windows 8.1 using the generic key but i cant get my key to activate 8.1. when i insert the supplied key into windows it says the key cant be used ( or summit at work atm)
Is the problem that the windows 8 key it came with says ' Windows 8 Small Screen Touch '?
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I have upgraded my system from windows 7 to windows 8 through digital delivery (no dvd). later it was upgraded to 8.1 pro now its in 8.1 pro with media center. Now i want to do a clean install of windows 8.1 pro with media center but i have no media, i have only windows 8 purchase product key and current product id.
View 9 Replies View Related