I have performed a clean install of windows 8.1 pro on my desktop with MSDN dreamspark serial and an ISO downloaded from Microsoft site with the serial ... the installation goes OK until I do the first restart, it hangs and the screen freezes at the spinning dots restarting, I left it abot one hour, it never restarts, by pressing the reset button the windows boots then the logo disappear then black screen with no responding, Is that copy is bugged or the windows is not activated.
I bought asus laptop k551ln-xx250h 2 months ago from Malasiya.It was fine bt 4 days ago it ran into a problem and started automatic repair.After waiting about an hour it started checking the c drive.Then the loop continued when i started my laptop.I tried to fix it by refreshing and reseting bt it didnt allowed me to do it.Then i used bootrec to fix it bt the result was same.Then I formatted the whole disk(1 tb) to have a fresh win 8.1 then i got a new serious problem.While installing the fresh 8.1 it stucks in starting the setup.I waited for about 2 hrs bt the screen shows the same message(starting the setup).Then i booted through usb bt the problem is same.Again i tried to install
I recently, restored my acer m5-581ptg to factory settings, since it is an older version (2012), there were about 111 updates that needed to be installed. That all went fine and then on startup, it starts up and shows the loading sign and 'please wait'.
I tried tapping f8 and shift + f8 with no luck whatsoever, and i also disconnected from power supply and took out battery, and restarted, still starts up 'no funny noises or anything' and then just sits on 'please wait'.
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
So, I turn on my computer and it shows the startup screen then the windows 8 loading screen then after that it just goes blank. Sometimes it crashes, I've tried to do a system restore, wipe( didn't work because I don't have installation media, just cd), and a few others. If I can get into my computer I will post crash logs.
How windows 8 works now without the sticker key on new laptops. I've searched all over the internet and all I can find are dumb articles telling users to use the manufacturers recovery image. How to do a CLEAN install of Windows 8.
My new windows 8 has NO sticker key on the bottom so my understanding is that it's stored on the bios? Is this correct? So my question is, is if I get an ISO of windows 8 and install it, will it automatically recognize the key or is the key only set up to be recognized by the PC manufacturers crapware filled image?
ALSO, if thats the case, can I use a 3rd party product to pull my key and then use that with the clean ISO? Lastly, where can I download a clean ISO of windows 8? I know you can download official windows 7 ISO's, but i cannot seem to find an official windows 8 iso. I have no desire to download a torrent or from some shady website, I just want an official ISO.
This video tutorial demonstrates how to clean install the Windows 8 Consumer Preview, which was released to the public on February 29, 2012 and expires on January 15, 2013. The Windows 8 Consumer Preview is an open beta test presentation of Microsoft Windows 8, the successor to Windows 7 and next-generation client operating system from Microsoft Corporation.
In this demonstration, you will be shown how to free, legitimate copy of the Microsoft Windows 8 Consumer Preview, with product key, and install the operating system in a clean environment. In this video, the installation of the 64-bit version is demonstrated.
so my windows install got borked so i formatted drive and did a clean win 8 install (not win 8.1). everything seems to be happy except the entire c: is "protected." can't even make a new folder without a pop up saying I need administrator approval (I am the only user and i am the admin).
I can't do clean install for win 8.1 update 1 retail pro version,due to product key problem.i tried many keys still the same problem,key isn't valid,the key that i bought is working only when upgrading from windows 7 only?
I only have a Windows 8 Single Language key purchased. They mostly sell that version in my country. But I need to perform a clean install of Windows 8.1. How can I do this? How to get the ISO? I can't install 8.1 PRO ISO with a generic key and they use the SL key to activate right?
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
I bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct. Do I: 1.) Get the ISO on the USB following the steps mentioned in the link above. 2.) Take out old HDD and install new SSD 3.) Reboot computer with USB 4.) ? 5.) ? 6.) ? etc.
Windows 8 64bit was taking forever to boot so I did a clean install but that didn't work. I am using an ASUS K56CA laptop. I have tried updating all the drivers I could find and windows too but it didn't work. When trying to put the computer to sleep I did get a DRIVER POWER STATE FAILURE message but I don't know if that's related to the extremely long boot times. I also disabled everything non essential from starting using MSCONFIG. I am out of options.
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I have upgraded my system from windows 7 to windows 8 through digital delivery (no dvd). later it was upgraded to 8.1 pro now its in 8.1 pro with media center. Now i want to do a clean install of windows 8.1 pro with media center but i have no media, i have only windows 8 purchase product key and current product id.