Setup Installation :: Just Black Screen And Cursor After 8.1 Download
Jan 6, 2014
Somehow i incidentally downloaded Windows 8.1 ( which i do not want to be installed to my Sony Vaio Laptop) but i thought that i will just download it , and NOT INSTALL IT ......and i DID NOT INSTALL IT , since after upgrading , it asked me if i wanted to install windows 8.1 , and i selected NO ..... my laptop turned off , and when i turned it on , now a black screen appears with the white cursor moving around the screen..... I click the Assist button , and i can't get a sony vaio care menu ..... Basically nothing displays , no configure ... I am stuck and can't use my laptop anymore
View 2 Replies
ADVERTISEMENT
Oct 18, 2013
I just installed 8.1 on my Samsung Series 7 Chronos laptop and it's now unusable. All I get after a reboot now is a blank screen and a vanishing cursor. I can't do CTRL+ALT+DEL or any other button combination. I also can't seem to be able to do a system restore as a restore point doesn't seem to exist for some odd reason. I've also tried the boot into low res mode but I get the same result. The only thing that seems to work is booting into Safe Mode with Networking but that doesn't allow me to install/uninstall anything so it's pretty much useless.
View 9 Replies
View Related
Dec 2, 2013
Upgraded to Windows 8.1 Pro from 8 through the Windows Store. Everything seemed to go smoothly. Updated graphics card drivers prior to install of 8.1. Now whenever I start up, I can log in, but then it goes to a black screen with a cursor. Ctrl-Alt-Del will bring up the task manager and from there I can access programs and get on the internet. So after maybe 5 minutes or so after opening a program (usually firefox) the Metro screen randomly loads. None of the store apps worked, though I was able to find a fix for that. Some of them still don't work right though. Is there a better way to upgrade from 8 other than through the store?
View 1 Replies
View Related
Jul 14, 2014
I have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself.
View 9 Replies
View Related
Nov 8, 2013
One day i tried to start my computer. Once it started i booted up steam only to see that none of my games were installed. Hmm. So i opened up my computer and saw that one of my SATA cables came unplugged. After plugging it back in my computer did a system check on all of my hard drives. Once that was completed my computer restarted and went to the swirly windows logo and then to a black screen with a mouse pointer that i could move...that's it. I've tried a few things from looking it up like booting into safe mode, trying to log in with the black screen still up, taking out the video card and putting it back in and nothing, just goes to the black screen. I don't have a windows 8 disk so i can't attempt to fix it that way nor do i have my 8 key on hand. i built my desktop so its nowhere on my rig.
View 1 Replies
View Related
Oct 4, 2013
I recently started having the black screen with the flashing cursor come up sometimes when I start my PC. I have narrowed it down as being my 3rd HDD (2TB WD) as the culprit, which I only use as media storage. It is not set as a boot device since windows is on my SSD and when I unplug the drive from my mobo, windows always starts up without any issue.
Basically my question is, is this just a case of a hard drive going bad? I ran chkdsk on all 3 drives and none of them had any issues and it is not fragmented or anything that I can tell, so I don't know. I have had this setup for a while now and about a month ago it started doing this. The screen doesn't always come up however, so I have no clue what the issue is.
View 9 Replies
View Related
Sep 19, 2013
I have my laptop running windows 8, and whenever i boot it up it just shows the "HP" logo and then the spinning dots on the bottom, then it just goes to a black screen with a cursor on it. Now I cant do anything with this, seeing as it is windows 8 I cant boot it into safe mode from startup. I have an HP Envy Laptop.
View 9 Replies
View Related
Dec 22, 2013
My MSI GE70 laptop with windows 8 64 has recently been having an issue while watching videos (whether it is a downloaded file or a stream) where the screen will suddenly go black and the sound will go away, but the cursor will still be visible with the spinning circle to show me it is working on something. It will just stay black and nothing will respond, even CTRL-ALT-DEL. The only way to fix it is to restart the computer by holding down the power button. It doesn't give me any error messages before this happens or on start up afterwards. It isn't overheating, and I didn't install any new drivers before this started.
View 1 Replies
View Related
Sep 15, 2014
I had to reinstall the whole machine from scratch because old HDD has been playing up. This is what I did:
1. Imaged old (faulty) drive to new one - just because I needed some data out of it and the old one was very slow and freezing.
2. run the system with new imaged drive - all working except sometimes it was playing up, so I decided to upgrade to another drive with Windows 8.1 from Win7
3. have plugged in new HDD to SATA0 port and the imaged drive to port SATA2
4. installed Windows 8.1, copied data over, reinstalled applications and so on.
5. all working perfectly. Now every time I boot up the machine, I'm offered options if I want to boot to Windows 8.1 or Win7. No problem there.
6. Now I wanted to remove the imaged HDD from SATA2 port, so I did - and here comes the problem:
All I get now is the black screen with flashing cursor in top left corner. How is this possible ? When I plug the second drive in all works as before. I just have to remove the second drive. How can I do this? In the attached image you can see my drives from Windows 8.1 the Disk0 is the one I need to keep - that's a Windows 8.1 ( C: ) Disk1 (imaged HDD) is the one with Win7 on it and needs to be removed.
View 4 Replies
View Related
Aug 12, 2013
I recently upgraded my dell 1645 from windows 7 to 8.
I installed most of the drivers from the dell website even though they were meants for win 7. For some of them I installed drivers directly from the device manufacturers website.
When the computer first starts up it passes the windows logo, and then a black screen is shown (no cursor) for a good 5 minutes. Then it advances to the login (seatle cartoon image) and everything works perfectly.
I had another issue before that I think I solved which was the intel rapid storage technology. Whenever the computer would go to sleep I got a windows BSOD saying driver_irql_less_than_or_equal. But after installing the newest intel rapid storage drivers sleep seams to work perfectly.
The drivers I installed from the manufacturers that arent on the official 1645 driver page:
- ati radeon drivers from ati
- synaptics drivers
- bluetooth 380 drivers, supposed to be 370 I believe but it seems to only be 380 available which people say works.
I also tried running the intel chipset automatic check, which said I was on the latest.
View 8 Replies
View Related
Sep 15, 2014
This has happened on a few different systems. After it has the login screen, It will go to the desktop (completely black no icons) and a cursor.
Windows sign does not work nothing other then CTRL + ALT + DEL works but wont bring up task manager.
So I end up doing the "Advanced start up" where I Restore the system and do a fresh load, but when I try to run the updates i get the error of
" Log file c:windowssystem32logfilessrtsrttraill.txt "
So I go to CMD (administrator) and run SFC/ Scannow
"Windows Resource Protection could not start the repair service"
then, chkdsk x: /f
Cannot lock current drive, windows cannot run disk checking on this volume because it is write protected. I ended up erasing the HDD and starting from scratch and STILL get the same issue.
View 4 Replies
View Related
Aug 4, 2014
My laptop has been acting really weird the last couple of weeks. It would crash randomly, and sometimes when I picked it up to put it somewhere else, it crashed too.
Now, I thought this was a problem with Windows 8.1, because it didn't behave like this before with normal Windows 8. So I Refreshed my laptop, and after that it worked again, without crashing.
I left it in sleep mode while I got some sleep too, and when I booted it up this morning, it crashed again.
After that the whole laptop wouldn't boot up, and now the only thing that shows is a cursor on a black screen, and it seems to be stuck in sleep mode, because I can't even turn it off completely manually. So I can't access the BIOS or make it boot up in Safe Mode.What the hell should I do?
Specs:
Toshiba Sattelite L50-A-15U
Windows 8 64-bit
Intel i7 4th generation processor with Intel HD4600 graphics card
nVidia GeForce GT740M graphics card
2x 4 GB DDR3L RAM
View 1 Replies
View Related
Jan 4, 2014
I upgraded from Windows 7 Home Premium to Windows 8.1 Pro about a week ago. Everything seems fine, unless I leave the computer idle for a long time. What happens is I get a black screen, with no cursor, when I return to the computer after leaving it idle overnight. It is not asleep. It is also not frozen. I can tell because I am able to reboot it while it's like this by:
Press: WIN+R
Type: shutdown /r /f [ENTER]
Wait 90 seconds.
The computer reboots just fine when I do this. Could it be a bad display driver perhaps? I have an AMD Radeon HD 7950 and am using the latest display drivers from AMD.
View 6 Replies
View Related
Nov 7, 2012
My windows 8 pc when booted, mostly freezes after i see my account picture with a circling dots. Then appears a black screen and just my cursors, but nothing else. I try to get task manager and run explorer.exe but it doesn't work. It has now been happening very much. I have installed the OS just a few days back and i got this issue. This also happens when i sign out/switch from my account to another account.
View 6 Replies
View Related
Jul 31, 2014
I shut down my computer last night. It runs 8.1 and when I shut it down I do not believe it installed updates.i tried to boot it. It boots and after I type in my PIN, shows my desktop for a few seconds. Then, my display will either turn black or a blueish grey. There is no cursor. It does this every reboot now. I can not do anything except reset when it happens.
System info:
Two GTX 760's in SLI
Two Asus monitors
Possible culprits:
1 - I have Actual Multiple Monitors trial installed. The freezing/display blanking seems to happen when the trial time left window shows up, but that may be coincidence.
2 - I heard graphics card driver updates and windows updates can clash in some way and cause a similar issue. From what I've read, a cursor is still on screen and task manager can be opened with CTRL SHIFT ESC. Neither of these work for me.
3- Virus? I have avast so I doubt it.
View 9 Replies
View Related
Mar 21, 2014
My Windows8PC shows black screen with only mouse cursor instead of login screen. I tried chkdsk but it shows no errors. Even when i start in safe mode the screen stays black. I think it's a graphic driver problem, but i dont know how i can deactivate or delete the installed driver via cmd.
View 5 Replies
View Related
Apr 26, 2014
I just updated my Windows 8.1 when I restarted my PC. When I was going to login, it was just a black screen. If you are in the login screen, the selected language in the right left corner and the internet connection in the left corner. Both of those two signs are flickering in the corners. And my cursor is also flickering.
View 3 Replies
View Related
Oct 25, 2013
Last week my laptop had trouble starting up, it had a problem with atidvag.dll if I recall. I wasn't sure what to do but I got lucky and after a few attempts in managed to boot. Now however it doesn't even get to the point where it could tell me what is wrong, no Windows logo. Just straight in black screen with a cursor in the top left. F2 will take me to BIOS (if I am quick), but no other keys work. Booted onto installation media to try startup repair, no joy, rollback also no joy, tried using command line following the instructions here to force a boot into safe mode but no joy.
View 4 Replies
View Related
Aug 15, 2014
I have a problem in my dual boot machine. I decided to remove Linux mint 17 from my dual boot with windows 8.
I used easeus partition manager to delete the partitions associated (root, home and swap). Then I got unallocated space just before my windows partition. So I moved my windows partition to the extreme left possible. Then I merged this unallocated space with my second storage partition.
These steps required reboot (specifically the moving of windows partition). When I rebooted my PC I got an error that grub was not found. I realized that I had forgot to fix MBR and load windows boot loader. So I used windows 7 recovery disk (yes windows 7 as I don't have windows8 recovery or installation disk). I got a windows 7 style boot loader instead of windows 8's graphical one which has advanced recovery options built in. But I proceeded. Then eases did its job with the partitions. After a reboot now I am stuck at a black screen after entering my password with a movable mose cursor. I can only press Ctrl+alt+del. Selecting task manager from it does nothing.
Since I don't have windows 8 disks and windows 8 boot loader I am not able to refresh or reset my PC. Neither can I shift restart my PC to get advanced boot options. One more thing to note, that while entering password, I noticed that the lock screen and account pictures have changed to defaults of a freshly installed windows.
View 3 Replies
View Related
Mar 8, 2014
I'm trying to install windows 8.1 pro,I have tried USB and DVD. Both of which give me a black screen after the windows 8 loading logo.
View 9 Replies
View Related
Jan 1, 2013
The laptop I have is an ASUS g74, I purchased the copy of windows 8 from microsoft's site, upgrading from windows 7 pro. I opted to keep all my personal files/apps because the programs it warned me as being incompatible were random games and such.
I googled this problem, and it seemed fairly common months ago when windows 8 first came out on dell/HP laptops. It worked flawlessly when I first upgraded and booted up fine but once I restarted I couldn't see anything other than the screen occasionally flickering brighter and darker.
However, if I plug my laptop up to a TV with an HDMI cable I can see everything on the TV. It's just the laptop screen that is blank.
View 9 Replies
View Related
Feb 29, 2012
I installed windows 8 to my machine. it has intel hd graphics. I can install it fine but once i try boot Windows 8 the screen goes black (screen is actually off). I can get it to work by plugging in a HDMI cable into thee hdmi slot and use a monitor. it works perfect like that but my laptop screen stays black. It must be the graphics driver. I tried updating the graphics driver and that didnt work. I then tried installing the driver from the dell site for Windows 7 and that didnt work.
View 9 Replies
View Related
Apr 27, 2014
I have black screen on boot , the boot logo doesn't appear , I can't access safe mode , black screen on recovery too , i tried to boot to reinstall the windows , the logo appears and start running , but black screen after that , I don't see the windows to install or to repair my laptop ! i tried Dium , which is a live session to repair laptops but can't access , black screen too i have a Hp Pavilion G6 , UEFI ...
View 1 Replies
View Related
Feb 25, 2014
I am trying to install windows 8.1 on my old windows xp laptop using a bootable USB from the universal USB installer, and when i press f10 on my laptop, and tell it to boot from my USB, it pulls up a black screen with a blinking line(like a terminal). i tried pressing a bunch of keys, and the only one that i got a response from was the enter key, which made a beeping noise.should i use a different program to put the ISO on my USB?
I'm going to try a program that i used a long time ago when the UUI wasn't working called Rufus. I'll let you all know if it works. Also I'll set it to NTFS instead of fat32 and see if that works.
View 1 Replies
View Related
Nov 28, 2013
After i updated to Windows 8.1, I logged in and everything was gone, Just a black Screen and the mouse was visible and able to move but nothing else. I've tried Safe Mode, didn't work and i also went to Task manager to see if it would do anything and it didn't.
View 3 Replies
View Related
Jan 16, 2014
I just reset my laptop and am upgrading to 8.1. This is the third time I have tried upgrading and every time it results in a blank black screen. I believe it has to do with video drivers. By a blank black screen I mean totally blank. There is no backlight and there is no cursor. I had this problem when it upgraded the intel graphics driver to the .3345 version so I went into safe mode and rolled it back. After the reset I uninstalled all intel graphics driver and used the microsoft driver. When I update to 8.1 I get the black screen even with this video driver. I will keep trying using the stable intel driver to see what happens.
View 6 Replies
View Related
Mar 13, 2014
This is a Windows 8 OEM CD install, on an i7 x64 system. I have tried this with both UEFI and legacy modes.
I cleaned the drive and allowed setup to partition and format how it sees fit on an Intel SSD.
The system copies files, sets them up and reboots.
The blue windows logo is up for a minute, then the screen (not the PC) power cycles (probably due to a resolution change). It hangs there on a black screen. There is a mouse cursor that responds and the num lock toggles on the kb, but nothing else. CTRL-ALT-DEL does nothing.
View 2 Replies
View Related
Oct 29, 2013
I am on a limited speed line and Windows 8.1 has started to download the update. I now find that is it is some 3G in size and that will take days. How can I stop the download?
How can I stop the download of Windows 8.1?
Effectively I cannot do any online work until I can stop the download hogging the limited bandwidth.
View 4 Replies
View Related
Aug 10, 2014
I did a refresh on my laptop, HP PRO BOOK 440 G0.
It was running on windows 8.1, refreshed to windows 8, but now its not updating.
I did download the and run WIndowsupdatediagnostic tool, its showing all errors fixed but still the issue is persisting.
View 5 Replies
View Related
Oct 20, 2013
I have successfully upgraded 2 Windows 8 pro media centre PC's, a desk top and a netbook, but the 3rd, gets stuck in a continuous loop.
After initiating the upgrade from the store, the download bar slowly works its way up to 50%, the installation process starts, and as soon as it gets to "getting your PC ready" the download process starts again from scratch. This is a very common problem, but Microsoft are still silent on the issue.
It is bad enough that I have to download the file 3 times, rather than just download one ISO, but this one download has now happened at least a dozen times.
All Windows 8 updates had been done and I have cleared the Windows Store cache.
The setuperr file gives
MOUPG SetupMgr: Error reading Store SQM registry data. Data = [StoreSetupDownloadPause], HRESULT = [0x80070002]
2013-10-20 07:23:30, Error MOUPG
[Code].....
View 9 Replies
View Related
Jan 22, 2014
Bought new pc with windows 8.0 installed. Can't download windows 8.1 from store
View 6 Replies
View Related
