I have my laptop running windows 8, and whenever i boot it up it just shows the "HP" logo and then the spinning dots on the bottom, then it just goes to a black screen with a cursor on it. Now I cant do anything with this, seeing as it is windows 8 I cant boot it into safe mode from startup. I have an HP Envy Laptop.
View 9 RepliesI have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself.
View 9 Replies View RelatedOne day i tried to start my computer. Once it started i booted up steam only to see that none of my games were installed. Hmm. So i opened up my computer and saw that one of my SATA cables came unplugged. After plugging it back in my computer did a system check on all of my hard drives. Once that was completed my computer restarted and went to the swirly windows logo and then to a black screen with a mouse pointer that i could move...that's it. I've tried a few things from looking it up like booting into safe mode, trying to log in with the black screen still up, taking out the video card and putting it back in and nothing, just goes to the black screen. I don't have a windows 8 disk so i can't attempt to fix it that way nor do i have my 8 key on hand. i built my desktop so its nowhere on my rig.
View 1 Replies View RelatedI recently started having the black screen with the flashing cursor come up sometimes when I start my PC. I have narrowed it down as being my 3rd HDD (2TB WD) as the culprit, which I only use as media storage. It is not set as a boot device since windows is on my SSD and when I unplug the drive from my mobo, windows always starts up without any issue.
Basically my question is, is this just a case of a hard drive going bad? I ran chkdsk on all 3 drives and none of them had any issues and it is not fragmented or anything that I can tell, so I don't know. I have had this setup for a while now and about a month ago it started doing this. The screen doesn't always come up however, so I have no clue what the issue is.
My MSI GE70 laptop with windows 8 64 has recently been having an issue while watching videos (whether it is a downloaded file or a stream) where the screen will suddenly go black and the sound will go away, but the cursor will still be visible with the spinning circle to show me it is working on something. It will just stay black and nothing will respond, even CTRL-ALT-DEL. The only way to fix it is to restart the computer by holding down the power button. It doesn't give me any error messages before this happens or on start up afterwards. It isn't overheating, and I didn't install any new drivers before this started.
View 1 Replies View RelatedI had to reinstall the whole machine from scratch because old HDD has been playing up. This is what I did:
1. Imaged old (faulty) drive to new one - just because I needed some data out of it and the old one was very slow and freezing.
2. run the system with new imaged drive - all working except sometimes it was playing up, so I decided to upgrade to another drive with Windows 8.1 from Win7
3. have plugged in new HDD to SATA0 port and the imaged drive to port SATA2
4. installed Windows 8.1, copied data over, reinstalled applications and so on.
5. all working perfectly. Now every time I boot up the machine, I'm offered options if I want to boot to Windows 8.1 or Win7. No problem there.
6. Now I wanted to remove the imaged HDD from SATA2 port, so I did - and here comes the problem:
All I get now is the black screen with flashing cursor in top left corner. How is this possible ? When I plug the second drive in all works as before. I just have to remove the second drive. How can I do this? In the attached image you can see my drives from Windows 8.1 the Disk0 is the one I need to keep - that's a Windows 8.1 ( C: ) Disk1 (imaged HDD) is the one with Win7 on it and needs to be removed.
I recently upgraded my dell 1645 from windows 7 to 8.
I installed most of the drivers from the dell website even though they were meants for win 7. For some of them I installed drivers directly from the device manufacturers website.
When the computer first starts up it passes the windows logo, and then a black screen is shown (no cursor) for a good 5 minutes. Then it advances to the login (seatle cartoon image) and everything works perfectly.
I had another issue before that I think I solved which was the intel rapid storage technology. Whenever the computer would go to sleep I got a windows BSOD saying driver_irql_less_than_or_equal. But after installing the newest intel rapid storage drivers sleep seams to work perfectly.
The drivers I installed from the manufacturers that arent on the official 1645 driver page:
- ati radeon drivers from ati
- synaptics drivers
- bluetooth 380 drivers, supposed to be 370 I believe but it seems to only be 380 available which people say works.
I also tried running the intel chipset automatic check, which said I was on the latest.
This has happened on a few different systems. After it has the login screen, It will go to the desktop (completely black no icons) and a cursor.
Windows sign does not work nothing other then CTRL + ALT + DEL works but wont bring up task manager.
So I end up doing the "Advanced start up" where I Restore the system and do a fresh load, but when I try to run the updates i get the error of
" Log file c:windowssystem32logfilessrtsrttraill.txt "
So I go to CMD (administrator) and run SFC/ Scannow
"Windows Resource Protection could not start the repair service"
then, chkdsk x: /f
Cannot lock current drive, windows cannot run disk checking on this volume because it is write protected. I ended up erasing the HDD and starting from scratch and STILL get the same issue.
My laptop has been acting really weird the last couple of weeks. It would crash randomly, and sometimes when I picked it up to put it somewhere else, it crashed too.
Now, I thought this was a problem with Windows 8.1, because it didn't behave like this before with normal Windows 8. So I Refreshed my laptop, and after that it worked again, without crashing.
I left it in sleep mode while I got some sleep too, and when I booted it up this morning, it crashed again.
After that the whole laptop wouldn't boot up, and now the only thing that shows is a cursor on a black screen, and it seems to be stuck in sleep mode, because I can't even turn it off completely manually. So I can't access the BIOS or make it boot up in Safe Mode.What the hell should I do?
Specs:
Toshiba Sattelite L50-A-15U
Windows 8 64-bit
Intel i7 4th generation processor with Intel HD4600 graphics card
nVidia GeForce GT740M graphics card
2x 4 GB DDR3L RAM
I upgraded from Windows 7 Home Premium to Windows 8.1 Pro about a week ago. Everything seems fine, unless I leave the computer idle for a long time. What happens is I get a black screen, with no cursor, when I return to the computer after leaving it idle overnight. It is not asleep. It is also not frozen. I can tell because I am able to reboot it while it's like this by:
Press: WIN+R
Type: shutdown /r /f [ENTER]
Wait 90 seconds.
The computer reboots just fine when I do this. Could it be a bad display driver perhaps? I have an AMD Radeon HD 7950 and am using the latest display drivers from AMD.
Somehow i incidentally downloaded Windows 8.1 ( which i do not want to be installed to my Sony Vaio Laptop) but i thought that i will just download it , and NOT INSTALL IT ......and i DID NOT INSTALL IT , since after upgrading , it asked me if i wanted to install windows 8.1 , and i selected NO ..... my laptop turned off , and when i turned it on , now a black screen appears with the white cursor moving around the screen..... I click the Assist button , and i can't get a sony vaio care menu ..... Basically nothing displays , no configure ... I am stuck and can't use my laptop anymore
View 2 Replies View RelatedMy windows 8 pc when booted, mostly freezes after i see my account picture with a circling dots. Then appears a black screen and just my cursors, but nothing else. I try to get task manager and run explorer.exe but it doesn't work. It has now been happening very much. I have installed the OS just a few days back and i got this issue. This also happens when i sign out/switch from my account to another account.
View 6 Replies View RelatedI shut down my computer last night. It runs 8.1 and when I shut it down I do not believe it installed updates.i tried to boot it. It boots and after I type in my PIN, shows my desktop for a few seconds. Then, my display will either turn black or a blueish grey. There is no cursor. It does this every reboot now. I can not do anything except reset when it happens.
System info:
Two GTX 760's in SLI
Two Asus monitors
Possible culprits:
1 - I have Actual Multiple Monitors trial installed. The freezing/display blanking seems to happen when the trial time left window shows up, but that may be coincidence.
2 - I heard graphics card driver updates and windows updates can clash in some way and cause a similar issue. From what I've read, a cursor is still on screen and task manager can be opened with CTRL SHIFT ESC. Neither of these work for me.
3- Virus? I have avast so I doubt it.
I just installed 8.1 on my Samsung Series 7 Chronos laptop and it's now unusable. All I get after a reboot now is a blank screen and a vanishing cursor. I can't do CTRL+ALT+DEL or any other button combination. I also can't seem to be able to do a system restore as a restore point doesn't seem to exist for some odd reason. I've also tried the boot into low res mode but I get the same result. The only thing that seems to work is booting into Safe Mode with Networking but that doesn't allow me to install/uninstall anything so it's pretty much useless.
View 9 Replies View RelatedMy Windows8PC shows black screen with only mouse cursor instead of login screen. I tried chkdsk but it shows no errors. Even when i start in safe mode the screen stays black. I think it's a graphic driver problem, but i dont know how i can deactivate or delete the installed driver via cmd.
View 5 Replies View RelatedI just updated my Windows 8.1 when I restarted my PC. When I was going to login, it was just a black screen. If you are in the login screen, the selected language in the right left corner and the internet connection in the left corner. Both of those two signs are flickering in the corners. And my cursor is also flickering.
View 3 Replies View RelatedUpgraded to Windows 8.1 Pro from 8 through the Windows Store. Everything seemed to go smoothly. Updated graphics card drivers prior to install of 8.1. Now whenever I start up, I can log in, but then it goes to a black screen with a cursor. Ctrl-Alt-Del will bring up the task manager and from there I can access programs and get on the internet. So after maybe 5 minutes or so after opening a program (usually firefox) the Metro screen randomly loads. None of the store apps worked, though I was able to find a fix for that. Some of them still don't work right though. Is there a better way to upgrade from 8 other than through the store?
View 1 Replies View RelatedLast week my laptop had trouble starting up, it had a problem with atidvag.dll if I recall. I wasn't sure what to do but I got lucky and after a few attempts in managed to boot. Now however it doesn't even get to the point where it could tell me what is wrong, no Windows logo. Just straight in black screen with a cursor in the top left. F2 will take me to BIOS (if I am quick), but no other keys work. Booted onto installation media to try startup repair, no joy, rollback also no joy, tried using command line following the instructions here to force a boot into safe mode but no joy.
View 4 Replies View RelatedI have a problem in my dual boot machine. I decided to remove Linux mint 17 from my dual boot with windows 8.
I used easeus partition manager to delete the partitions associated (root, home and swap). Then I got unallocated space just before my windows partition. So I moved my windows partition to the extreme left possible. Then I merged this unallocated space with my second storage partition.
These steps required reboot (specifically the moving of windows partition). When I rebooted my PC I got an error that grub was not found. I realized that I had forgot to fix MBR and load windows boot loader. So I used windows 7 recovery disk (yes windows 7 as I don't have windows8 recovery or installation disk). I got a windows 7 style boot loader instead of windows 8's graphical one which has advanced recovery options built in. But I proceeded. Then eases did its job with the partitions. After a reboot now I am stuck at a black screen after entering my password with a movable mose cursor. I can only press Ctrl+alt+del. Selecting task manager from it does nothing.
Since I don't have windows 8 disks and windows 8 boot loader I am not able to refresh or reset my PC. Neither can I shift restart my PC to get advanced boot options. One more thing to note, that while entering password, I noticed that the lock screen and account pictures have changed to defaults of a freshly installed windows.
I have a asus k53s that i recently upgrade to Windows 8 (from w7). Sometimes when i leave the laptop on but don't use it(idle), the fan will be constantly on even if its not doing anything like running a virus scan, and the screen will also shutdown going completly black. I can't move the mouse or press keys to "wake" the computer and i have to reboot the computer by pressing the power button.
.I have everything updated with the latest drivers, so i really don't understand the reason for this.
I have a Gateway NE56R41u with an Intel B960 Processor, 4GB DDR3 Memory and running Windows 8.1 I have had the Laptop for 1 year. I got the info above from stickers on the Laptop so there is no more info I can give you. It originally came with Windows 8 and I upgraded it to 8.1 when that became available. When I boot the laptop it goes to the first screen, I click on the icon and the password screen comes up, I put in the password and it goes to a black screen with nothing on it and stays there on that black screen. I tried hitting the F key on boot up but nothing happens.It is not the screen, not the graphics card, otherwise I wouldn't see the first two screens. It acts like the OS has been wiped off.
View 2 Replies View Related3 days ago i turned of my computer and left it turned of over the night. Then when i tried to turn it back on again, i get the windows 8/8.1 boot logo, then when it dissapears i just get a black screen, however, i get the windows tone after a while indicating that the system is running, and that the only problem is that the screen is not displaying anything.
I have tried booting in safe-mode, that worked. But no matter what i changed (start-up programs and resolution) nothing worked. I have tried connecting another screen to my laptop, but that screen also displays the black color.
I should perhaps mention that my laptop originally came with Windows 7, but i upgraded it to Windows 8, and later on 8.1.
My Laptops specs:
Product Name HP Pavilion dv6-7097eo Product Number B3K95EA Microprocessor 2.3 GHz Intel Core i7-3610QM Chipset Intel HM77 Express Microprocessor Cache 6 MB L3 cache Memory 8 GB DDR3 Memory Max Supports up to 8 GB DDR3 Memory Slots 2 user accessible Video Graphics NVIDIA GeForce GT 630M (2 GB DDR3 dedicated) Hard Drive 750 GB SATA (5400 rpm)
Up to 24 GB partition for system recovery Multimedia Drive SuperMulti 8x DVD R/RW with Double Layer Support Display 39,6 cm (15.6")
39,6 cm (15,6") full HD anti-glare LED (1920 x 1080) Network Card Integrated 10/100/1000 Gigabit Ethernet LAN Wireless Connectivity 802.11b/g/n; Bluetooth Sound Beats Audio with HP Triple Bass Reflex Subwoofer Keyboard Full size island-style with integrated numeric keypad Pointing Device TouchPad with on/off button and support for multitouch gestures External Ports Multi-format digital media card reader
1 VGA
1 HDMI
1 headphone-out
1 microphone-in
1 USB 2.0
3 USB 3.0
1 RJ45 Dimensions 37.8 x 24.7 x 3.26 cm Weight Starting at 2.57 kg Power 120W AC power adapter
6-cell Li-Ion Camera HP TrueVision HD Webcam with integrated digital microphone (low-light)
My HP Windows 8 laptop started going very slow so I restarted via the power settings. When it restarted it did an update, though it didn't say "update and restart". When it started again and went to desktop it went slow again and I got a "windows is not responding" (or something along those lines) message, then the screen went black, I left it for a few minutes but it stayed black. The cursor was still there and if I right clicked it showed the menu.
After this I did a hard restart and attempted to go into recovery mode, it didn't go the and when I got to desktop I got the same message again, this time the desktop had the usual white highlight when something isn't responding, but still required a hard restart.
I am now on the third time and it seems to be working, I am doing a full computer scan. What I want to know is why it would do such a thing?
If all else fails it's under warranty, but being a student I have a lot of work to do so can't really afford to be without the laptop.
I am using Windows 8 on my laptop. If I connect my laptop to a video projector and left it idle for about 4 minutes, the screen turns black. So I am trying to avoid this. Here is what I did so far.
First I found that for Windows 8, the option of presentation setting is not available in Control panel -> Windows Mobility Center (Fig. 1).
Next I looked for the screen saver and found that I have not activated it at all. Also the (Fig. 2)
Next I tried to Change the power setting by going to Control panel -> Change power setting -> Change when to turn off the display and set all of the as Never (Fig. 3)
I still got the black screen after doing these. Finally I noticed that after I left my laptop idle for about 4 minutes, it says "maintenance is in progress" in the "Action center". After searching through web, I found that an easy way to stop this maintenance during my presentation. I disconnected from the wireless internet temporary when giving a presentation. I tested this and after disconnecting from internet there will be no "maintenance is in progress".
However, the screen still turns black during presentation, even after disconnecting from the internet.
I have a Toshiba laptop running Windows 8 (see below)
For months, I have used HDMI to connect to my Vizio TV .
Suddenly, the connection began giving e problems. I tried playing with the setting, setting the monitor selection to the TV. Now, when I connect the HDMI cable, both the tv says 'no connection' and the laptop screen is black.The option I used to change the settings is gone.
HDMI cable and trying to detect the tv, but the laptop screen is black
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8076 Mb
Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb
Hard Drives: C: Total - 600061 MB, Free - 526563 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: AVG AntiVirus Free Edition 2014, Updated and Enabled
I'm trying to stream TV program videos available from my TV provider on my Windows 8 laptop (Firefox from the desktop). I get a black screen and no audio. On my W7 desktop it works flawlessly.
View 9 Replies View RelatedI have a samsung laptop. I turn it on and I can see the bios screen. After that, the screen just goes black and stays that way and doesn't boot. I am able to get into BIOS and I can see all bootable options. I am not able to get into recovery settings or the advanced boot menu.
I burned my Windows 8 iso to my flash drive and plugged it into the computer. I tried automatic repair with it and that didn't fix it. I tried doing a system restore, but it failed saying "System Restore failed while copying the registry from the restore point. The registry in the restore point was damaged and could not be restored." The computer was working during that restore point that. I will try another one though.
It appears that something is corrupt within Windows, but I'm not sure exactly what. I can issue the command in command line, since I can boot to my flash drive, but I'm not sure what files I need to fix or if I'm correct.
My little brother has an 8.1 laptop, and from what I understand, when it prompted him for updates he clicked to restart. Now when the laptop tries to restart he sees his manufacturer logo and the Windows 8 loading circle, but after this the monitor goes black and stays that way. At some point a bluescreen pops up, says something about fixing the PC, goes to 100% after 5 minutes, restarts the PC, and the PC goes back to the manufacturer logo to start the loop again.
View 9 Replies View RelatedAfter getting a new HP Envy M6 laptop on Monday I am now a Windows 8 user....after got familiarised with new metro style I have noticed that DVD maker is missing.... What has happened to this rather useful DVD creating tool that I come to love in Windows 7 as I there is No burn DVD option in Movie Maker....
View 4 Replies View RelatedHow do you permanently disable the clickpad on an HP ENVY laptop using Windows 8? Restarting re-enables the clickpad.
View 4 Replies View RelatedI have bought a HP envy 15 and upon using it a couple of times I turned it on again and Bluetooth had DISAPPEARED it was non existent in any settings or the Control Panel or anything except in Device Manager. After excessive clicking around I found that it had been turned off so I turned it back on.
I have used it for a while since until I turned it on today and found it to be again completely disappeared, I have tried everything within my knowledge to fix it and right now I have re-remembered how utterly worthless HP are at making hardware. I cannot find how to turn it back on again if it is the same error, but I do not think it is.
If I go into my device manager now (see image) it has the exclamation mark through it which means what exactly?? Clicking to update the driver does nothing, restarting does nothing, I can't see how uninstalling or disabling it will do anything.