I am using a gaming mouse which has a maximum setting of 3200 DPI. I have it set to 3200 DPI. The game I am playing has a slider to adjust mouse sensitivity and that slider is maxed out. With that said, the sensitivity/speed is still too slow for my liking.
Is there anyway that I can speed up the mouse sensitivity/speed in game.
I was wondering if there is a way in OS8 to alter the mouse/touchpad sensitivity and speed as was possible in OS7 and Vista. I have a 17" laptop and it would massively work with movement around the screen.
View 1 Replies View Relatedwhy it is that I have trouble browsing in high speed despite the fact that the wireless adapter receives data at 1 Mbps minimum? I haven't been able to watch videos on Youtube, read the news etc because the browser takes ages to load the full page. I checked which applications are connected and they haven't exchanged much data as you can see below:
View 6 Replies View RelatedI noticed that when i manually set my memory to 2133 mhz (as instructed by gskill, since my memory is 2133 but if i don't change it there it will be 1600), my cpu temps go like 5-8 C higher. Is this normal? Is there a correlation between ram performance and cpu heat?
View 9 Replies View RelatedI do not want to check the speed on a USB 3.0 flash drive or external drive. I need to know the speed of the port itself is transferring at full 3.0 capacity.
What I have is an external mechanical USB 3.0 hard drive. I know it's a 7200 rpm drive. My 3.0 USB ports on my laptop are not using the blue USB plastic to denote 3.0 speeds, they use black plastic.
Therefore I am not confidant they are running at full 3.0 speeds. I want a tool that will measure the port speeds independently of any drive or device on the USB port.
I did find this but I do not have any Advanced tab to check for or to reset the device to Super
There are four USB specs: 1.0, 1.1, 2.0, and 3.0. But to confuse things, each USB spec has more than one data rate assigned to it. Those rates are "low", "full", "high", and "super."
Therefore, benchmarking data throughput solely on speed is not necessarily conclusive as to what the actual spec being used. Thus, a USB 3.0 port may not be actually running at a "super" rating but at a "High" rating instead.
On a Windows machine, check the data rating of the USB root/hub - Goto: Device Manager --> USB Controllers --> USB Root Hub (Right Click) --> Properties --> Advanced (Tab).
It should tell you the data rating for the USB hub/port. Once you know that, you'll know the maximum throughput from the computer's POV.
Low = 1.5 Mbps Full = 12 Mbps High = 480 Mbps Super = 5 Gbps
Windows - Verifying USB connection speed (USB 3 or USB 2?) - Super User
Here is what the listing looks like in device manager Under the two 3.0 USB hubs at the top, there is no advanced tab.
So I ran speed test with several different website and they all said my download speed is between 5 Mbps and 8 Mbps :
However when i actually download something my download speed stay at 1 Mbps or when i watch videos ( youtube) I don't have this problem with my phone !
when i am inserting my usb game pad, every time it is showing a error.
then in device manager i uninstalled that device, then refresh it. but still its not working. still there is an unknown device in device manager.
I want to install 16gig of ram on a Z87 Sabertooth Motherboard and have run into a problem. I getdifferent opinions from various sites. I want to install the maximum speed without overclocking, some say 1866mhz and some say 1600mhz. what is correct?
View 5 Replies View RelatedAfter spending a lot of time isolating the specific update that was giving me the extremely slow reboot time, (from 5 seconds to 150 seconds after update) I was able to determine that Windows optional update -Qualcomm Atheroos Communication - Bluetooth Controller - Qualcomm Atheros AR3012 Bluetooth 4.0 + HS was the cause of the lag.
Any solution to the lag. from 5 seconds to nearly 3 minutes is a substantial lag in restarting the computer.
The computer is a MSI GS70 229US.
There is 3 hdd's installed to my rig:
1 is 55gb kingston ssd where i run my windows
2 is 1tb hitachi where i keep my games and other junk
3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%.
What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
How to boost the read/ write speed of my Hard Disk Drive. Someone told me about some innovation in Windows 8 such as Superfetch, Prefetch, Ready Boost, etc - something that is supposedly utilizing the idle capacity of your RAM/ SSD to boost the read/ write speed in the Hard Disk Drive.
Currently, my laptop is setup as follows;
120GB C Drive: running on SSD - has the Windows 8 and all apps installed in it,
500GB D Drive: has all the Libraries folders installed in it.
RAM = 4GB. PLanning to increase it by an additional 4GB.
Hence, how can i use the SSD or RAM to improve on the Hard Disk read/ write speed? Currently, my Intel SSD toolbox is showing as follows:
Question is how do we know if Superfetch / Prefetch is enabled based on the printscreen shown above? It just show that the feature is optimised.
By the way, can we transfer the following folders from C Drive to D Drive? Will it affect the computer performance?
since the last windows update Tuesday I have began to notice my mouse cursor moving around the desktop on its own. I never noticed it before the last updates.
View 4 Replies View RelatedJust got a surface Pro 2 for work. In addition to the keyboard I need a mouse. normally a cheap USB mouse would do.
however, I also have one of those 4G wireless network USB dongles that takes the only USB port.
Can any of the other ports be used for a mouse? I think it also has Bluetooth, but ideally don't rely on a mouse needing a battery.
unrelated to this, how does one use the camera properly in desktop mode? All I read it is using the cloud? what? I just want to access the pictures I take somehow. and can the camera zoom at all?
They are so freaking. I use a ELAN Mousepad.
View 3 Replies View RelatedOver the past three weeks or so, there have been probably seven times my wireless USB Nexus Silent Mouse has not been recognized on cold computer startups (usually morning). Windows 8 (Pro x64) throws up a message that a USB device wasn't recognized, and I don't see a mouse cursor. Unplugging and replugging the USB mouse's stick, which is in a port on the front of the computer, solves it. The mouse driver is up to date, changing USB ports hasn't made a difference and the batteries are fine (and have been changed).
View 4 Replies View RelatedRecently I bought a new lap top and installed Windows 8.1
I have an issue with the Mouse/s. I tried 2 different mouses and I encountered the same problem with both of them, so I know it's not a mouse problem. Note that both of these mouses work perfectly on my other/older/Windows 7 and previously Windows XP lap top, so it's not a mouse issue. It's either a driver problem or something else.
I have tried all 3 USB ports I got and it does the same thing.
When I turn on the lap top, if the mouse is plugged or unplugged and I plug it afterwards, it doesn't work. If however I turn on the lap top, plug in the mouse, and the restart the lap top, when it restarts the mouse works fine all up until the lap top is turned off again. And then to get it to work again I have to turn on the lap top, with the mouse plugged, or plug the mouse after it's turned on, then restart the lap top, and then the mouse works fine.
Apparently, this is not very convenient. It's a major inconvenience.
p.s I never had this issue before on any other PC computer or lap top, whether it was Windows XP or Windows 7. So it's either a Windows 8.1 issue or the new lap top issue, or a driver issue.
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
Every single time I reboot my system my mouse fails to register in the system. I have to physically unplug it and plug it back in for Windows 8.1 to register it. Once I do that I have literally no issues at all..... How to fix this so it doesn't happen every single time I reboot?
View 1 Replies View RelatedOk I finished up my PC Build
i74930 K
Asus Rampage IV Black Ed mobo
16Gb DDR 3 ram
Samsung 840 EVO ssd
2 TB WD HDD
My mouse or Keyboard or both suddenly without warning will stop functioning. Sometimes one or the other sometimes both. I tried running a game for a small bench test and it dropped the mouse and keyboard so I had to use the reset button to get out.
On PC, has a problem with the PS2 keyboard and mouse staying on after the PC is turned off...the lights are still on.
The only thing different when I had it was the keyboard and muse and the OS....I use a logitech G510 and a Razer DeathAdder, both USB and the OS was 7 Ultimate 64 bit. My sons system is running 7 Pro 64 bit and using an old OEM HP keyboard/mouse.
I installed the 8.1 patch today and shortly after the mouse disappeared from my screen completely (I have a laptop with a touch pad). I tried going into task manager as just going in and cancelling used to solve this problem before installing the patch but this no longer works. I also tried rebooting (switching off then on again) but this didn't work and the computer didn't even reboot; just reopened my session exactly where I left off even when I waited ten minutes before switching the on switch again. I have temporarily solved this problem with a usb mouse borrowed from a family member but my family member needs it back (and I also would prefer to use the touchpad).
I should add here that I didn't want to do the installation when it started happening and while I meant to press the "default settings" option, I think I went with "customise settings" by accident. I just said ok to everything as I had a deadline and needed computer access. Could I have pressed "turn touch pad off" and if so how do I change this?
Every now and then my mouse will freeze. If I turn off the mouse then back on it starts working again. Have this happen with Bluetooth mouse?
I have used this mouse on two different computers and both do the same thing. I'm thinking it is the mouse since it's doing it on my desktop with a Bluetooth dongle and my Asus T100 with built in Bluetooth.
Installed windows 8.1 preview last night and after installing i get stuck at the lock screen, cant click or punch keys to log in. Since the powers that be decided to change how you boot into safe mode is my only option to format?
View 3 Replies View RelatedI was having the issue where windows 8 randomly disconnects bluetooth devices, so i tried to remove then reinstall it. When trying to remove, after a while, it comes up with a message saying "Unable to remove device".
So I go straight to device manager and uninstall my mouse from there. it works. I go back to the windows 8 show bluetooth devices menu and the mouse is still there. I hit remove and it works.
Now when i restart my computer its BACK in both device manager and bluetooth device menu. I just want it off and gone.
Recently, with my Mouse (Optical) the Mouse Pointer does not respond all of the time.
View 1 Replies View RelatedThe only thing that has changed is that I upgraded my OS recently.
I have an 2.4 GHz Wireless Laser Mobile Mouse. Originally after the upgrade, the left button caused right clicks and vice versa. I found a workaround by changing the Windows 8 settings to "Right Primary Button" while in the control panel, the device is configured for the left hand. If I select "Left..." and right respectively, I get the reverse. The scroll wheel also does nothing when clicked. Sometimes when I read articles I click it so I can move my mouse up and down to scroll the page without pushing any keys.
I have tried uninstalling and reinstalling the mouse driver and HID driver with no luck.
Well, my first real problem with 8.1, my bluetooth mouse drops connection about every 15-20 minutes. Turn it off and back on it reconnects.
A search of the web shows other people with same problem. I've tried everything I know of, power settings for bluetooth the mouse and usb ports, drivers, uninstall/re-install.
I can install and use any of two bluetooth mice (Dell PU705 Travel mouse or Samsung S Action mouse ET-MP900D) on my Lenovo Ideapad Z710 laptop. This works fine with either mouse for an average of 20 minutes (varies) then it loses contact with the laptop and its back to using the touchpad. When I go to the Bluetooth settings page -- "Manage Bluetooth Devices", the control suddenly reappears on entering the page with no further action from me. The recovery of the device like this happens on no other page, to my knowledge. I have a phone and a tablet paired with the laptop on bluetooth and they stay paired. I have installed the latest Lenovo bluetooth drivers with no improvement. It appears that the mice are still connected but not responding to the laptop until they get a small 'kick' when I return to the Bluetooth settings page. New, full strength batteries are installed.
View 1 Replies View RelatedI have a lenovo G505 laptop running windows 8.1 and i am having issues trying to install my bluetooth USB adapter, a belkin F8T017.
I have tried installing the drivers but it doesn't recognise the device during the installation, and when I check device manager it shows as a HID compliant Mouse, i have tried everything i can find on google, tried installing the vista drivers in compatibility mode, and repeatedly uninstalled the device in DM, even tried to update the driver software and pointing to the correct drivers but as the drivers are old it keeps saying the drivers installed are the most up to date (even though they are wrong) it does not recognise it as a bluetooth adapter, and it works in my fiancee's laptop and my desktop which both run win7 ultimate.
I've tried three mice, Logitech G400, Razer Deathadder 3.5 and a random Logitech wireless but the problem remains.
I haven't found any coincidents when i run a specific program or game. Sometimes it goes a day or two without incident and sometimes multiple times a day. I have run several Malwarebytes Anti-Malware and Avast scans but they did not find anything.
I have also ran a "sfc /scannow" and the "DISM.exe /Online /Cleanup-image /Restorehealth" to fix. I have tried the current drivers for every mouse, tried without drivers and tried to uninstall all drivers all let Windows install them itself.
My specs:
Windows 8.1 Pro 64-bit
System Manufacturer: Acer
System Model: Aspire 5750G
BIOS: InsydeH2O Version V1.21
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (4 CPUs), ~2.3GHz
DirectX Version: DirectX 11
Graphics:
GeForce GT 540M
Driverversion: 327.23
Card name: Intel(R) HD Graphics 3000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
I want to know how to get smooth scrolling in metro app with mouse wheel. I'hv seen some videos of windows 8 it has really smooth - fluid scrolling with touch. I have smooth scoll in start but not in metro apps.
View 2 Replies View Related