I have hp notebook with windows 8 OS. When I plugged in the charger the display totally disappears and the screen has black for only 1, 2 seconds. And the same situation is when i removed the charger. But this is not happened when i was using windows 7. Is this a problem or a feature of windows 8.
Just got my hands on a brand new ASUS K95VB notebook on behalf of a friend. I used a USB with Windows 8.1 on it in order to format the hard drive and install Windows. The hard drive is 3TB. I remember trying to install Windows using the UEFI option in the usb startup menu but that didnt work so I proceeded on the non-uefi option.
Now the problem is that only 2 TB are shown and the remaining 1 TB is shown only in device manager as not assigned...
If I understand correctly, the BIOS should be in UEFI mode and then the hard drive should be converted to GPT and then install Windows.
But, no option in BIOS for UEFI to be enabled whatsoever. What on earth should I do?
I recently upgraded to Windows 8 (64-bit) and noticed I don't have power options available. I own an HP Pavilion DV7, usually when I leave the laptop to do something over night, I go into "Choose what closing the lid does" and I get the error saying my power plan info is not available. Whenever I try to create a powerplan it tells me the same thing, but when I hit next, it tells me it can't find the file specified. I have no power options at the moment. I tried resetting to defaults using cmd, rebooted, and the only power option I had (Razer Gamebooster) was gone, and had nothing after.
I've been trying to change my power options. I go into Power Saver, "change plan settings," and try to change the "On battery" setting from "Put the computer to sleep: 3 minutes" to "Put the computer to sleep: Never." (I want to make this change because I have a Dell XPS, and it can have difficulties waking up from sleep.)
I've made this change a number of times, but after a while my computer simply reverts back to the 3 minute setting on its own. So, I leave the machine alone for a few minutes, I come back, and it's asleep...even though I thought I had changed the setting to 30 minutes. And in fact, I *had* changed the setting to 30 minutes; the computer is somehow reverting to 3 minutes on its own.
Use of the Power Saver Setting in Windows 8 lowers my pc temperature (at idle) by at least 6 degrees. Using this setting, my pc now idles at 27 degrees C. When I use High Performance, my idle temp is usually at least 33 degrees, or more. For those who have problems with their pc's running warm, this is just one of the things I've found which works for temperature lowering. My biggest impact on lowering temp was air cleaning the pc case interior - getting all the fuzzy balls out...... At one point, my idle temp was in the 50 to 60 degree range and I figured my disk was failing. After checking for a possible problem, I found much of the problem was my own maintenance procedure failure. So, if your pc seems to be running rather high, look around for the simple solutions - clean pc, use power settings, etc.
My windows 8 laptop no longer allows me to select an option out of Power Saver, Balanced, High Performance, Power4Gear Battery Saving, and Power4Gear High Performance. It is set to High Performance, and any time I try to click another option it immediately returns to High Performance.
I recently purchased a DVP8 and I love this thing. Problem is, it suffers from wifi issues in that once it goes to sleep, the wifi automatically goes to "limited" and I need to retoggle the wifi setting to get it connected. I've tried all kinds of fixes - uninstall windows updates and reinstalling drivers, but to no avail.
So I basically said screw it, and set "sleep mode" to never on the power management option, and no more wifi issues. Seems like the wifi doesn't reactive properly when coming out to sleep mode. My question is - will this damage the tablet in the long run? In terms of battery life, I would think the main factor is the screen on time. I can just turn the screen off with a tap of the power button. Is there really that big of a difference?
The Troubleshoot icon that should be under the 'Advanced Startup' Option is missing. System is a new Dell Latitude 10 ST2 Tablet running Windows 8. Have access to 9 other identical tablets, all configured the same and they all have the Troubleshoot Option. Have tried multiple methods of getting to "Advanced Startup" display (including Safe mode, 'shutdown /r /o', etc.), but all result in only having the 'Continue', 'Use a Device', and 'Turn Off your PC' options - No Troubleshoot. Other than missing this icon, system is working fine. Shy of wiping the disk and starting over.
I'm trying to dual-boot Windows 7 and Windows 8 in the same machine.
Before doing something this risky on the host computer I tried to install Windows 8 in a VM using VirtualBox but I got an 0x0000005d error similar to the screenshot below:
which means my CPU doesn't seem to support the NX (Non-eXecute) or XD (eXecute Disabled) bit feature (or at least doesn't have it enabled).
I proceeded to check with CPU-Z and going to the model page on HP's website and both of them seem to imply that the NX feature is available for my CPU.
Here's the CPU-Z screen:
The problem is that even though I have the "Hardware Virtualization" feature enabled in the BIOS, it seems like there's no option available regarding said NX (or XD) bit by default. The BIOS software is InsydeH20 Rev 3.5, version F.32.
Is there a way to be able to install Windows 8 on said computer that doesn't involve having to upgrade the BIOS software?
I have my main nbook (MSI GT683R-261CS), which have UEFI (AMI Aptio). However when I try to install Windows to (pre-created) GPT GUID sytem boot partition, Windows installation program kicks me to balls, that it can't be installed there. In UEFI setup, there is no option to switch between MBR and GPT boot. Is there any utility, which will tell me, if my machine supports booting from GPT GUID?
I proceed in creating system boot GUID GPT by something like this:
Code: rescan list disk select disk[=n] detail disk list partition select partition[=n/l] detail partition
I have a Dell Inspiron 3137 Notebook Running Windows 8.1 and I use Internet Explorer 11. There is one website that I can't connect to, all I get is a blank page. It is a site that I pay my credit card on. Everyone of my other web pages loads properly. I am real good at fixing problems on my computers and numerous other people's computer problem, but I have to admit that this one problem has got the best of me.
This website worked fine on Windows 8, but I upgraded to Windows 8.1.... now it won't load the website.
I recently updated my Studio 1458 Notebook from 64-bit Windows 7 Ultimate to Windows 8 Pro. It is a 2.4GHz Intel Core i5-520M, 8 GB Shared Dual Channel DDR3 at 1066 MHz RAM, 512 MB ATI Mobility Radeon HD 4530 Video Card, 500 GB SATA @7200 RPM HDD.
Since upgrading, I have had no control over the Sleep function. I have changed all settings I can find on CONTROL PANEL<POWER OPTIONS, and still the system goes to "Sleep Mode" if I do not touch it for a few minutes. It even went to Sleep DURING the Windows 8 installation, which made it take longer than expected.
i brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
I have an HP Envy notebook. bought it 3 months ago. made recovery disk (actually it's on a flash drive). Had troubles with the notebook. HP support walked me through factory reset. Twice.
Never used the flash drive. used whatever was on the computer. Whether or not to keep the recovery stuff I put on the flash drive? Just wondering if its a waste of a perfectly good flash drive, seeing as I never used it when I reset.
I have a MSI 780dxr w/ a i7 and an Nvidia 570m (3gig) and playing some games the rig just shuts off. The fan is working like it always did before I upgraded from 7 to 8, and the turbo boost for the fan works as well
So this morning my dad went to power off his ASUS K55N Notebook, and it didn't turn off correctly, the screen went black, but the system stayed powered on (had to perform a hard shutdown). He didn't perform any Windows Update(s) or install new drivers prior to this, he didn't change anything, and just now it did the same thing.
the Notebook was performing perfectly fine before today.
Attached is the .zip generated by the SF Diagnostic Tool.
my dell inspiron 7520 running windows 8 on it but i have purchase a windows 8 pro and wish to install on it.
i delete all the partition inside hard disk, put in the disk and boot on it but a message pop up "The product key entered does not match any of the Windows images available for installation. Enter a different product key."
how can i solve it? how can i install windows 8 pro with the windows 8 pro key? can i delete the license key in BOIS?
I purchased a new notebook and it has Office 2014 installed.. I was using Outlook on my old notebook, is there a way to migrate my account/folders/emails to my new notebook? I want to just pick right up where I left off, not have everything 'archived' and start new or anything..
I have a MSI cx640dx notebook the core i3 version and it came with windows 7 installed on it,I replaced it with windows 8.1 pro with media center and everything was fine,but when I installed the intel graphics drivers (either from windows updates or manually) it started to give me a blank screen on restart so I have to pres the power button to make the system go to sleep and start it again to get my screen back (this happens on every restart) but when I shut down and start normally that doesn't happen
I have a software on my notebook called Lenovo Energy Management, and there's 2 battery mode available, the one is "Maximum Battery Life" and the other is "Optimized Battery Health" so I choose "Optimized Battery Health" mode, and leaving my notebook while it is charging for about 5 hours.
When I am go back home, I saw that my battery is stay on 60% and it say "Plugged in, not charging". It won't charge the battery higher than 60%, so I guess the battery is limited to 60% from it's full capacity. The question is, is it safe for the battery if I leave the notebook while it is charging for more than 5 hours even the battery capacity is limited?
I have a random freezing in about 30min interval. I can move mouse, watch video but its like lag, freeze, hang all my notebook for 2-3 seconds. I already updated my video drivers, scanned my hard drive.
I have the Asus Netbook and I updated the software.
But now it has completed its updating but the screen freezes, I can't touch screen anything and only can lock and unlock the screen. It also cannot shut down, so do I wait for it to run out of battery?
For the last week or so, I've been having issues with my ASUS notebook disconnecting from my wireless network or having a limited connection. This would happen maybe twice a day, but eventually I went online and I found that I had an outdated driver for my Intel Centrino Wireless N-2230, and as soon as I downloaded the latest driver, my notebook would disconnect every 5 minutes or so. Running the troubleshooter just keeps returning the same thing; Default gateway not available. It also does this annoying thing where it'll disconnect and reconnect over and over again, so quickly that the network sharing center can't even register it's happening. I've tried resetting the WINSOCK, IPv4 TCP/IP, and IPv6 TCP/IP stacks, I've tried a clean boot to see if it was a startup program affecting my connections, and I've changed my power settings so they don't turn off my adapter. I even tired booting my computer in safe mode, which didn't work.
Here's my ipconfig /all: Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved. C:UsersTim>ipconfig /all Windows IP Configuration
I have a new Windows 8-notebook connected to a workgroup-ethernet-network via router,to which a windows [version unknown]-server is connected and 6 other clients,2 of them macs,4 xp-pcs.
On all machines,3 other machines resp shares are constantly visible in "network places":
1 the server-share 2 a client-1 share (which has no internet access) 3 a client-2-with-internet-access-share
The notebook gets internet via the wall-plugged lan,from a router-plugged DSL-router. All issues mentioned here are not dependent on which lan-wall-socket is used. (there are 3 in each room). There is no wlan-accesspoint.
Issue: The notebook is _not _seeing_ (not in net places,and not forceable) the server-share_, despite the fact,that the share has been used before to install a bigger client-server software,which worked.
First appearance: Some day someone tried to access a lan-wall-plug-connected printer for printing, which at that time could be seen in network places,as then could the server; after which _both_ disappeared.
Unfortunately,above said client-server-sw is not working anymore on the notebook. How can I bring back the server-share to the Windows 8-notebook?
maybe 2 weeks I get randomly BSODs, sometimes with "Multiple_IRP_Completed_Requests", sometimes with "PFN_LIST_CORRUPT" errors.
It felt to me that they appeared more often after starting the computer out of standby/hibernate. But today it happend while watching a video over HDMI. After starting, Windows tells me that it wants to send the following to Microsoft (just in case it's important):